Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Bring the simplicity of nature to your dining table with these rustic circular placemats.
This lovely nature-inspired set contains four placemats, ideal for giving informal or special-occasion tables a little rustic charm.
At 30 cm (11�¾") diameter, these mats are excellent for regular dinner plates. And check out the matching coasters available.
The tight weave of these table mats means they are heat resistant to 30C (86F). Excellent for day-to-day use.
***MADE FROM 100% NATURAL WOODEN***
1.Heat Resistant Spoons-Long and comfortable handles make these cooking spoons easy to hold when stirring food for a long time and protect your hands from the heat of your dish.
2.Easy to Clean & Store-A wood spoon is easily cleaned with warm soapy water. You can easily store this wooden utensil set in a drawer or spoon holder, or hang it on the wall.
3.Great for Crafts and Decoration-A great choice for sending mom, women, and chefs for housewarming, birthday, Christmas and more special occasions as our wood utensils set will be useful in every kitchen. It's the best tool to gift your loved ones who spend time in the kitchen to see happy smiles of family. Time to give them a decor set which will decorate their kitchen with an elegant look!
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
11552 Heat Resistant Rfid Student Lockers Suppliers
Short on time? Let Heat Resistant Rfid Student Lockers sellers contact you.
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind White-Mix
CATEGORY: HIPS
TYPE: Regrind White-Mix
SPECIFICATION Product- HIPS regrind post production from Yogurt caps Contamination â?? up to 2% foil metalizing (cover of the yogurt caps). Food grade material Post - industrial Sheet Extrusion & Vacuum forming
Origin: Spain
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: HIPS
TYPE: Regrind
SPECIFICATION: Hips from post consumer materials.Yes No Fr, NO pc abs, no iron, no circuit etc. Hips per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
1. Improves nylon water absorption and improves size stability of the product.
2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries.
3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement.
4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress.
5. Improves nylon wear resistance to meet high wear resistance requirements.
6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications.
7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines.
8. Reduce nylon cost and improve product competitiveness.
Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality.
MATERIAL : PA66 FR regrind black color
CATEGORY : PA66 FG
TYPE : Regrind
GRADE : Black color
SPECIFICATION : GF50. 1 full container available
Origin : Tunisia
LOADING WEIGHT 23 Ton
FOB (USD/Ton) : 750$ - 950$
Packaging : Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.
PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.
MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability
POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin:
High hardness
Bearing good
Low friction number
High resistance to abrasion
High temperature resistant
Less water intake
Has anti-static ability
Dimensional stability, little change
Less smoke burns when burning
High glossy surface
High crystallization
In addition to the priority points, POM plastic also has some limited formats such as:
Quality acid resistance and alkali
High hatch rate when changing secretions
Operation mode Heat range
MATERIAL: POM regrind black color full container available
CATEGORY: POM
TYPE: Regrind
GRADE: Black color
SPECIFICATION: 1 full container available
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
4 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 9 mm, 10 mm and 12 mm, A wide range of paper straw selections, with selected FSC paper, food safe grade ink, and heat resisted glue
Maltodextrins are classified by DE (dextrose equivalent) and have a DE between 3 and 20. The higher the DE value, the shorter the glucose chains, the higher the sweetness, the higher the solubility, and the lower heat resistance.
Applications :
As a Thickener and Stabilizer:
FlaMas-MS-CWS-E1422 is cold water soluble. It can be used in foods
as a Bulking agent, Binder, Thickener, and Stabilizer; provides medium
smooth thickness & texture to the products like Ketchup, Chilli Sauce, Soy
Sauce, Chocolate sauce, Canned foods, Baked Foods, Gravies, Yoghurt,
Jelly, and Pudding.
For Shear Applications:
FlaMas-MS-CWS-E1422 has process tolerance; it is resistant to
medium heat and shear. It has medium resistance against acids, sugar, and salt
and freeze/thaw stability. It adds luster to the products, making them more
appealing. It has high paste formation properties in cold water.
For Gluten-Free Products:
It can be used as a Gluten-Free substitute in various foods like
infant foods, confectionery, Jelly type sweets, iced lollies, wine gums, yogurts,
fruit-flavored fillings and batter mix to egg white mix.
* Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.
1). Surface preparation and application of Primer: Refer application method of Primer.
2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes.
CHEMICAL RESISTANCE PROPERTIES:
* Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats
STORAGE & PACKING:
* Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.
HEALTH & SAFETY:
* Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.
Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.
PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries.
Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace.
As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc.
Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron
The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit..
Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks
Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel.
The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Magnesia Bricks Description
Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application.
Magnesia Bricks Features:
It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature.
Magnesia Bricks Application
Basic open-hearth furnace for steelmaking
Electric furnace bottom and wall
Permanent lining of oxygen converter
Non-ferrous metal metallurgy furnace
Hyperthermia tunnel kiln
Lining of rotary cement kiln
Heating furnace bottom and wall
Regenerative chamber of glass furnace
Magnesia Bricks Properties
High Refractoriness
Good alkaline slag erosion resistance
High apparent initial softening temperature
Good thermal conductivity
High thermal expansion
Magnesia Bricks Manufacturing Process
Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
1. Improves nylon water absorption and improves size stability of the product.
2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries.
3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement.
4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress.
5. Improves nylon wear resistance to meet high wear resistance requirements.
6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications.
7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines.
8. Reduce nylon cost and improve product competitiveness.
Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality.
MATERIAL: PA66 GF regrind black color
CATEGORY: PA66 GF
TYPE: Regrind
GRADE: Black color
SPECIFICATION: GF50. 1 full container available
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 850$ - 1050$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
4.Excellent Anti-corrosive And Excellent Weather Resistance.
PVC roof tile can long resist acid, alkali, salt and other corrosive chemicals. It suitable for using in corrosive workshop, acid rain-prone area and coastal area.
5.Good Fire Resistance With Excellent Insulation And Excellent Waterproof Performance.
Belonging flame retardant material, with fire resistance tested by national authoritative departments. The roofing sheet selects highly weather-resistant resin, which is dense and
absorbing no water, with no pore penetration problem.
11552 Heat Resistant Rfid Student Lockers Suppliers
Short on time? Let Heat Resistant Rfid Student Lockers sellers contact you.
