1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
2000 lbs drop hammer 8000 foot lbs 8200lbs of energy
Hammer Material of hammer head: c45 steel Material of handle: bleached wood Finishingof hammer head: powderpainted Hardness of hammer face:50-58hrc, hammer eye:30hrc Pull of strength: 600n Diam of hammer face; 1.5mm Weight of hammer head: 0.1kg Handle length: 25cm
Precise SKF Main bearings Excellent synchronization pulley & synchronization belt High-quality V-belts High quality hydraulic cylinder and accumulators Good performance hydraulic pressure system Meticulous PLC electrical controlling system (Excluding Soft Rest) Avional guard covers and doors Famous brand main motor.
Anyang forging press machinery industry co., ltd is the special manufacturer of forging hammer. It was appointed to produce the pneumatic hammer by original ministry of machine building of china. We have a history of more than 50 years in producing pneumatic forging hammer in china.Our pneumatic forging hammer was awarded the top prize by china government.We have passed ce certification. The c41 series pneumatic forging hammer is mainly used to free forging, drawing, upsetting, punching, hot shearing, forged welding, bending, torsion and foetal, standard forge. The c41 series including c41-9kg, c41-15kg, c41-25kg, c41-40kg, c41-55kg, c41-75kg, c41-150kg, c41-250kg, c41-400kg, c41-560kg, c41-750kg, c41-1000kg, c41-2000kg Wooden case
Marking hammers As per quantity
DTH Hammerbit More than 50kg.
Outdiamater: 79mm, Length:991, Back adapter thread:API 2 3/8" REG Structure stroke:127mm Working air pressure:1.3MPa-2.5Mpa Mathched bits: COP34,IR3.5" Wooden cases
All steel construction, steel casted chamber, Very low electricity consumption, very little Maintenance, less space requirement etc. 8'x 8", 4'x 7", 11'x 4"
PLC fully-hydraulic die forging hammer, innovated with the worldwide advanced technology of forging , is such product of machine-electrical integration with hi-tech & autonomic intellectual property developed in China, a new type of CNC forging equipment with high efficiency, energy-saving and environmental protection features. It's the key science and tech project in the í¦Fifteenth planningí¦ of Jiangsu province and No. 1 in China at the moment and the tech. has reach up to the advanced level of the same kinds products in the world. In 2002, the fully-hydraulic die forging hammer is patented by Chinese Government. Main Structural Characteristics A Intellectual CNC system PLC fully-hydraulic die forging hammer is equipped with on-line electronic monitors system for pressure, temperature and cleanness and PLC energy control unit as well as logic monitoring system. The electronic monitors are used to guarantee normal operation of the hydraulic system while MSP processor will be responsible for comprehensive analysis technical data collected from on-line sensors, such as: tooling data, working oil pressure, blank deformation, etc and then realizing automatic control for striking energy after calculation of those data and further come to the logic monitoring for the whole working procedure. With precise striking energy control, it can not only reduce vibration and noise generated by surplus striking energy but also increase the hammer's operational reliability and tooling life and further improve forging's quality and speed up working efficiency and decrease the operatorsí» skill requirement. The logic control for the whole working procedure means monitoring working status of all device and executing elements by certain software program. It is also featured with man-machine conversation and malfunction display. B High efficient tapered valve control PLC fully-hydraulic die forging hammer is actuated by tapered valve, with advantages of high efficiency, energy-saving and fast speed due to prompt reaction, big flow-rate, simple construction, compact design, short oil pipeline, minimum pressure and flow loss, etc. C Unique drive structure PLC fully-hydraulic die forging hammer has combined cylinder construction. Because its striking frequency is basically similar to steam hammer, it needs fast oil discharge speed when striking. By using the combined cylinder, it needs no oil pipes, no valves, less or no on-the-way resistance when charging and discharging oil, thus, it can finally realize fast striking and fast return. D Safe sealing PLC fully-hydraulic die forging hammer is constructed with high and low pressure anti-leakage unit, so that the little leakage of the high pressure oil due to incomplete sealing oil can go back to the tank through the oil reflux channel. Low pressure sealing is just for preventing outside leakage of the oil but high and low pressure sealing system can guarantee absolute sealing. wooden cases,30t,
Super pressure trapezium mill
The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine.2 It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. Our ball mills have been used to grind glass, powder food products, creat custom varnishes, make ceramic glaze, powder various chemicals, and make black powder.
When a certain degree of wear of roller and ring is affected, it is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, the stable output and fineness are ensured. And its rolling pressure ration is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree.
It can process wheat, corn, rice , maize, beans, millet, oats, buckwheat, herb, tea , sorghum, dry chilli/pepper Low rotating speed, only 19-25 rpm/min, so low temperature , so the flour nutrition and taste such as protein, carotin, vb etc can be kept well . The flour will be more gluten and no need to add any additives. The capacity we have 20kg/h, 30kg/h, 40kg/h, 50kg/h, 60kg/h, 75kg/h and customized production line
Cryogenic Mill with Closed Liquid Nitrogen (LN2) Auto-fill: LPM-01 Overview: The LPM-01 cryogenic mill with closed liquid nitrogen (LN2) auto-fill system is carefully developed by RUISHENBAO® analytical (shanghai) Co., Ltd, which pulverize and mix some soft, temperature-sensitive or high fat content of samples such as candy, chocolate, Soybeans, peanuts and other food samples for sample preparation in laboratory. The grinding jar is continually cooled with liquid nitrogen from the integrated LN2 cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the system and is continually replenished from an auto-fill system in the exact amount which is required to keep the low temperature of user that evenly reach -196 °C depending on the continuously filling time and amount of LN2. Powerful impact vibratory disc mill results in a perfect grinding efficiency. The auto-fill system avoids direct contact with LN2 and makes cryogenic grinding very safe. Its versatility (cryogenic, wet and dry grinding at room temperature) makes the LPM-01 the ideal mill for quantities up to 100-500 mL (depend on feed material). Its typical area of application includes food analysis, plastic product analysis, mineral analysis, medical aid analysis, drug performance testing, and identification of textile components and so on. Features: � Powerful cryogenic grinding by impact and friction from vibratory disc mill, up to 700-1400rpm, continuously adjustable, short grinding time; � 3 different grinding modes (cryogenic, dry or wet at ambient temperature); � Closed LN2 auto-fill system for enhanced safety, avoids any contact of the user with LN2; � Low LN2-consumption; � Clearly structured user interface, one-touch operation, easy controlling,; � Touch-screen programmable controls for cooling and grinding cycles; � High-capacity grinding up to 500mL of hard, medium-hard, soft, brittle, elastic or fibrous samples (max. equivalent of 500g, depend on feed material); � Pneumatic grinding-jar clamping (with air-pressure) for convenient and safe handling: mill only starts if the grinding-jar clamping is correct; � Noise-insulated grinding chamber and especially safe hood locking; Fields of application: Agriculture, chemistry/plastics, construction materials, engineering/electronics, environment/recycling, food, geology/metallurgy, glass/ceramics, medicine/pharmaceuticals. Typical samples include: animal feed, bones, chemical products, food, hair, oil seeds, paper, plant materials, plastics, sewage sludge, soils, tablets, and textiles, waste samples, wood, wool and so on.
We are pleased to offer our phosphate from our mines in Egypt - Our Purity from 23% up to 31% Phosphate Rock is the raw material to manufacture most commercial phosphate fertilizers. In its unprocessed state, phosphate rock is not suitable for direct application. The process begins by grinding rock phosphate to a fine material. Potash is also fed together with super phosphate to obtain various grades of fertilizers.
We are leading manufacturer and supplier of milling vice at all over india level from last 15 years and now we start our export at world wide.
We are manufacturing different types of vice from last 15 years and distributed it national level but now we start our export at worldwide.
Pruducts Name :MESP-09 End mill Group of Product :Milling Cutter:Indexable End Mill Place of Origin :China Brand Name :HAFFMAN Typ :MESP-09 Material :SC Insert and Holder Diameter :20-40 Category :End mill Coating :TIN Length L :120-160 Nummber of Inserts Z :2 to 4 Cutting length L1 :40-80 Diameter of Shank d :25-40 angle of insert :90° Innnen cooling :upon inqiury length of insert a :9 Typ of inserts :SPMW09T308,SPMT09T308-M Finishing :Yes Rouging :Yes Stock :on Stock
