Fu Series Gravity Scraper Chain Conveyor Suppliers and Manufacturers

XGZ Cast Stone Scraper Chain Conveyor Stone Scraper Chain Conveyor, scraper conveyor, chain scraper conveyor, Cast Stone Scraper Conveyor Introduction of XGZ Cast Stone Scraper Chain Conveyor XGZ Cast Stone Scraper Chain Conveyor is widely for conveying powdery, granular, small block and mixed material at a temperature no higher than 250 custody transfer. Horizontal transport mainly, but also inclined conveyor, the maximum transmission angle not more than 20. This XGZ Cast Stone Scraper Chain Conveyor machine is mainly used for conveying kinds of different moisture coal that is below 30mm in coal dressing plants and ground production system. It's also used for conveying materials in coal supply system of electric power plant and metallurgy mine. It can be arranged horizontal and obliquely. Main Characteristics of XGZ Cast Stone Scraper Chain Conveyor 1. With compact structure, XGZ Cast Stone Scraper Chain Conveyor can be divided into the single, double transportation when the horizontal transportation. 2.Easy installation and maintenance, multi-point charging and discharging. 3.XGZ Cast Stone Scraper Chain Conveyor adopted dry conveying, should not be handling viscous, low broken rate of friability material. Technical Parameters of XGZ Cast Stone Scraper Chain Conveyor Trough Width (mm)Chain speed (m/s)Transportation Capacity (t/h)Length (m)Feeding size (mm)Motor Power (kw)Weight (t) 6000.48/0.7650-10017.70-505.59.6 8000.48/0.76100-20017.70-507.512.9 10000.48/0.76150-300180-501115.6 12000.48/0.76400-80018.80-10018.520.4 14000.48/0.76500-1000190-2002224.6

Model Trough Width Transport Speed Material Bulk Density Capacity Conveying Length Installation Angle (mm) (m/s) (t/m3) (m3/h) (m) (degree) MS16 160 ---0.16 m/s ---0.20 m/s ---0.25 m/s ---0.32 m/s 0.2~1.8 t/m3 15~29 < 80m 0°~30° MS20 200 23~46 MS25 250 36~72 MS32 320 59~118 MS40 400 83~166 MS50 500 115~230 -

model MC 16 MC 20 MC 25 MC 32 MC 40 machine width(mm) 160 200 250 320 400 Conveying speed (m/s) 0.16 m/s, 0.20 m/s, 0.25 m/s, 0.32 m/s material bulk density(t/m3) 0.2~1.8 t/m3 delivery value(m3/h) 11~22 15~30 23~46 46~74 55~110 conveyor Height (m) 5~30m setting angle (°) 30°, 45°, 60°, 75°, 90° -

Trough Width (mm) Chain speed (m/s) Transportation Capacity (t/h) Length (m) Feeding size (mm) Motor Power (kw) Weight (t) 600 0.48/0.76 50-100 17.7 0-50 5.5 9.6 800 0.48/0.76 100-200 17.7 0-50 7.5 12.9 1000 0.48/0.76 150-300 18 0-50 11 15.6 1200 0.48/0.76 400-800 18.8 0-100 18.5 20.4 1400 0.48/0.76 500-1000 19 0-200 22 24.6 -

model SGB-620/40T SGB-420/30 SGD-280/11 SGD-320/17B Transportation volume(t/h) 150 80 30 40 Design length(m) 100 100 80 80 Electromotor type JDSB-40 JDSB-30 JDSB-11 JDSB-17 power(KW) 40 30 11 17 rotate speed(r/min) 1470 1470 1450 1470 voltage(V) 380/660 380/660 380/660 380/660 Retarder ratio 1:24.564 1:24.923 1:18.9 1:24.95 Scraper chain chain speed(m/s) 0.868 0.738 0.618 0.59 breaking force â?¥320 â?¥190 â?¥127.4 â?¥190 chain link spec.(mm) 18*64 14*50 14*40 14*50 scraper distance (mm) 1024 1000 800 700 middle groove dimension(mm) 1500*620*180 1200*420*180 1200*280*125 1200*3200*150 machine weight (KG) 17800 8581 3100 6400/6800 -

Mine scraper scraper as a connection, its abrasion resistance and tensile ability will not only affect their own use, for the normal operation of the entire scraper has an impact, the lofty building rises from the ground, of course, want to have good performance, the mine scraper scraper material choice is about to pay attention to. From the current market situation, 40Cr material scraper scraper is a better choice, to meet the use of coal production needs, in the degree of wear resistance or considerable. Good material also not line, mine blowing machine scraper to durable to start from the machining process, first select the forging scraper is the right choice, relative to the casting quality for scraper is in a class, implemented by every production process, processing equipment of the escort, from the expected product each link strict control. A good mine scraper scraper quality from the details, human and material costs of investment only for the production of good scraper scraper, not a price war, only a quality war, this is the way to survive the development of enterprises. Henan Shuangzhi Machinery specializes in the production and sales of scraper, bolt, dumbbell pin, gear rail, sprocket components and other accessories. Welcome to consult and cooperate with new and old customers!

PHYSICAL PROPERTIES Properties BC-SR Conc BC-VX Conc BC-PL Series BC-HTR Series Specific Gravity 1.38 1.35 1.38 1.2 Average Particle Size,Microns 4 - 6 3 - 4 15 5 - 6 Softening Point Deg.C 155 - 165 130 - 140 90 - 110 125 - 135 Decomposition Point Deg.C > 200 > 200 > 290 > 300 Heat Stability Deg.C - - 240 270 - 290 Solvent Resistance Very Good Poor - APPLICATIONS Paper Coating Water Base R R Solvent Base R Textile Printing R R Dyeing R Paints/Inks Water Base R M Solvent Base R Plastics M R R PVC Plastisols R M Wax Candles & R M Modeling Wax Clay Colouring R R Miscellaneous Art & Craft R R Banners R R R = Recommended M = May Be Used (After Trial) BC-SR Conc. Series : Thermosetting type of high strength pigments with fine particle size,used for Solvent/Water Based Paints,Inks,Papercoating,Textile,Plastisols,Crayons,Plastics etc. Applications. Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R),Red Orange,R.Red,Pink(B), Pink(M),Pink(S),Magenta(S), Magenta(R), Magenta(B),Violet(B),Violet(R),Royal Blue,Peacock Blue BC-VX Conc.Series : Brillaint,high strength series with very fine particle size used for Textile-Printing, Oil/Water Based Paints/Papercoating etc. applications. Shades : Saturn Yellow,Brilliant Yellow,Z.Yellow,Bright Yellow,Geneva Green,Glow Green, Glow Green(S),Deep Green,Jet Green,Golden Yellow(Y),Golden Yellow(R),Orange(Y),Orange(R), Orange(S),Red Orange,R.Red, Rich Orange(Y), Rich Orange(R),Arch Chrome,Pink(B),Pink(M),Pink(S),Magenta(S),Magenta(R), Magenta(B), Violet(B),Violet(R),Royal Blue, Peacock Blue BC-PL Series : Thermoplastic polyester based,formaldehyde free,high strength colours,with good heat resistance which melt blend in plastics.These are Fluorescent Pigments specially made for Plastics Application (Execpt PVC calendering). Shades :Brilliant Yellow,Lemon Yellow,Green,Glow Green,Brill Green,Deep Green,Golden Yellow(Y), Golden Yellow(R), Orange(R),Orange(3R),Orange(4R),Orange(Y),Red Orange,Fire Orange,Red,Pink(B),Pink(2B),Pink(3B), Pink(4B), Pink(2R), Pink(R),Magenta(R),Magenta(S),Magenta(B),Blue,Royal Blue,Violet BC-HTR Series : Thermoplastic polyamide based,formaldehyde free,premium high strength colours, with excellent heat resistance,brillance & low mould plateout which meltblend in Plastics. Shades : Lemon Yellow,Green,Golden Yellow,Orange(Y),Orange(R),Red Orange,Red,Pink(R), Pink(B),Magenta

The gravity roller spiral conveyors are easy to connect and filter. They can be used to form complex logistics conveying system with multiple roller conveying lines and other conveyor equipment or special units to meet various technological needs, which are widely used. The main materials of the turning roller conveyor are carbon steel, stainless steel, PVC and plastic steel. Gravity spiral conveyor are today being used in a rapidly growing companies across a broad spectrum of industries. Spiral Conveyors need less floor space than conventional conveyors and are faster and more reliable than any elevator or lift. All our spirals are designed for low maintenance and long life with many operating 24 hours a day, 7 days a week. Hot Tags: gravity roller spiral conveyor, China, manufacturers, suppliers, factory, wholesale, price, for sale, Slat Chain Turning Conveyor, Sortation Conveyor, Bottle Unscrambling Machine, Filling Machine, Gravity Roller Conveyor, Carton Unpacking Machine

Mode:FU200-FU410 Material ideal size:â?¤11ï¼?mmï¼? Max. size:â?¤21ï¼?mmï¼? conveying capacity :16-240ï¼?m3/hï¼? FU type scraper conveyor (chain conveyor) is an conveying equipment which is traction components on the roller chain plate and continuous. This type of device with compact structure, good sealing, rational layout, application convenient maintenance, etc. It is mainly used for grinding powder, particle, small lump with strong abrasive in horizontal or inclination, also widely used in chemical industry, metallurgy, mining, building materials, electric power, light industry, traffic, road construction, food processing industry, port, etc. Application : Chemical industry, metallurgy, mining, building materials, electric power, light industry, traffic, road construction, food processing industry, port, etc. OUR ADVANTAGE 1 Because the scraper conveyor is the use of the material in the friction to drive the material move, therefore, the smaller resistance during operation, low energy consumption, energy saving about 50% less in compared with the screw conveyor. 2 Conveyor chain adopts high strength wear resistant alloy sleeve roller chain plate structure, and after the special technology processing, it has high strength, low friction coefficient, long working life and other characteristics; 3 Wide scope transportation, it should be transport various powder, granular, lump material with high capacity and long distance below 150 â??. 4 The whole transport process conducted in confined Spaces, sealed safe and reliable, especially suitable for conveying volatile, toxic, corrosive, and special medium, etc. 5 The type scraper conveyor is completed, there are FU200, FU270, FU350, FU410, various types etc. It can customize according to customerâ??s demand for special. FU type scraper conveyor is mainly composed of transmission device, chain scraper device, head device, intermediate shell, tail device, etc. 1. transmission device Transmission device mainly include motor, reducer, coupling, transmission system, frame, and protective cover, etc., This part of the high reliability, compact structure, less wearing parts, convenient operation and maintenance. 2.the chain scraper device 3.Casing head device Casing head device is mainly composed of the head, head shaft, etc; Among them, the casing connection part of the head set with reliable seal, ensure no leakage of dust in the working process, and in its upper part is equipped with the access door, the observe the performance of the sprocket, conveyor chain at the same time, can also be convenient for related maintenance work. 4.Intermediate casing Intermediate casing is made up by a number of standard section, connected by flange, bolts, between each section and casing has standardized design, can be used according to different user's needs, quick adjustment.

Sprocket wheel is an important component of sprocket assembly. Sprocket assembly is composed of sprocket wheel, sprocket shaft, bearing, bearing housing, sealing ring, etc. Sprocket material is made of 42CrMo, and its mechanical and other aspects of performance are better than other materials. Sprocket wheel of sprocket assembly is mainly produced by forging and quenching process to improve sprocket wear resistance, of course, there are other processing equipment finishing. The processing requirements of sprocket assembly sprocket wheel shall first ensure that the surface of sprocket wheel forgings of sprocket assembly is free from cracks, interlayers, folds, forgings, slag inclusion, crust and other defects, and check to ensure that there is no crack in the middle of the sprocket body. Secondly, the tempering hardness of the sprocket wheel of the sprocket assembly reaches HRC250-280, and the tooth surface is quenched. The quenching hardness of the tooth surface of the sprocket is HRC50-55, and the hardening layer depth is 10mm, so as to improve its wear resistance and extend the service life of the sprocket assembly. Through to the sprocket chain wheel body component processing, can also see that double of henan for scraping machine sprocket components such as all kinds of machine parts production strictly, made of high quality products, customer satisfaction products, has been a double the execution of the standard, we use good products, in exchange for your trust, if you need a scraper conveyor sprocket, welcome to contact us, double of henan look forward to cooperation with you!

Scraper conveyor sprocket component and the sprocket wheel of the everyday is the same, is through the chain to realize power transmission and run, through its name can be seen that it is in the coal mine fully mechanized working face of scraper conveyor equipment accessories, located in the head, tail, so there are according to different location is called the nose wheel component, the tail sprocket components. So the sprocket assembly of the scraper conveyor can only be used on the scraper conveyor? Isn't. Scraper conveyor and reproduced machine structure is known to all, similar to that of the nose and tail sprocket components for scraper conveyor sprocket component size is the same, the nose sprocket components than the tail sprocket and reproduced machine components, but for the sprocket used component structure are the same, so the scraper conveyor sprocket components can be used in reprint machines is scraper conveyor on the nose of the tail with chain wheel component, the nose chain wheel component and the tail sprocket and reproduced machine components used two sprockets types are different, so most of the time just call, But the scraper conveyer and the transporter sometimes use the same sprocket assembly. Whether it is scraper conveyor sprocket assembly, or transfer machine sprocket assembly, as long as there is sprocket assembly figure number can be accurately implemented sprocket assembly, its name labeling does not have a great impact, so sometimes we do not too complicated name. Henan Shuangzhi Machinery as a scraper parts manufacturer, scraper conveyor sprocket assembly model and specifications are relatively complete, can help you implement the product for processing and production, let you find the right person, give you the right product, we have been working hard, welcome you to consult and cooperation.

The coupling of the scraper is also called plum flower elastic coupling, which is an important part of the transmission of power on the scraper conveyor. The scraper coupling is shaped like plum at one end, a disk with holes in the middle and a hollow cylinder at the other end. In general, a scraper conveyor needs to be equipped with two couplings, one is installed on the motor, one is installed on the scraper reducer, two parts of the coupling plum relative to each other, coupled with the coordination of the elastic disk, to complete the power output from the motor to the reducer. The use of the coupling directly affects the connected parts at both ends, the quality is excellent, the installed coupling can reduce the operating noise of the parts at both ends, so that the operation is more stable, efficient and the service cycle is longer. So in the purchase of scraper coupling, to choose the best quality products, choose the appropriate manufacturers. Henan Shuangzhi Machinery produces various types of couplings, the models are 110S2402-01, 102S21-01, 123SMB13-02, 105SD01-01, 8Z001-46/2, 89S26-02, 111S09-01, etc., more product drawing Numbers, contact us for more verification.

72/06LL sprocket assembly is one of the main parts of the transmission department of SZZ764/200 transfer machine. The sprocket assembly of the head is similar to the structure of the tail, which can be assembled and disassembled as a whole. The sprocket assembly is driven by the scraper chain. The sprocket assembly can be turned for a period of time to allow even wear on both sides of the sprocket teeth. Szz764/200 transfer machine head and tail sprocket is the same size, mainly by end cover, sprocket shaft, sprocket, floating seal, bearing and so on. The sprocket is forged as a whole with 7 teeth, the tooth shape is machined and the tooth surface is quenched. The inner holes at both ends are involute splines, and the power is transferred to the sprocket through the output shaft of the reducer, so that the sprocket drives the scraper to run. The sprocket can be disassembled as a whole without disassembling the transmission device for easy maintenance. Henan Shuangzhi can be customized new and restored sprocket components, if you need more information, welcome to visit the factory.

The scraper produced by Henan Shuangzhi is mostly made of materials of 27SiMn, 40Cr and 40Mn2. After forging, the strength, hardness and toughness of the above three materials are all improved, and the abrasion resistance and bending resistance are also greatly improved. The specific processing technology of scraper is as follows: blanking â?? heating â?? forging blank â?? punching â?? removing burr â?? tempering â?? shot blasting â?? surface treatment â?? quality inspection. Forging process is the key of processing technology. After the blank is heated in the reheating furnace, the blank is made by forging hammer. During the forging process, the oxide skin on the blank surface is knocked off, and the depth and hardness of the hardening layer of the scraper blank are more guaranteed. Henan Shuangzhi supplies the following types of scraper: 101S-01 scraper, 150S0117-1 scraper, 5GL02-2A scraper, 1GL3-1 scraper, 43GL03-1 scraper, 77GL3-1 scraper, 3S001-00/14 scraper, 8GL04-1 scraper, etc. More scraper models can contact us for verification, provide drawings can also provide customized services. Scraper is only a small part of our business, Henan Shuangzhi machinery mainly produces and manufactures all kinds of coal parts forgings, scraper parts, transfer machine parts, hydraulic bracket parts, etc., Henan Shuangzhi all involved. If you need coal parts forgings, you are welcome to contact us. All staff of Henan Shuangzhi will serve you wholeheartedly.

Scraper conveyer is one of the main equipment for conveying coal in fully mechanized coal mining face, and the central trough of scraper conveyer is the fuselage component and material bearing mechanism of scraper machine, so the central trough of scraper machine also has an important effect on scraper machine. We all know that the scraper conveyor is mainly composed of the nose, tail and fuselage. The main body of the scraper conveyor is the central trough. The performance of the scraper 105S07 central trough directly affects the service life of the scraper conveyor. The central trough of 105S07 bears the severe friction of coal, scraper and chain in the process of coal conveying. The middle trough of the scraper conveyer 105S07 is also the fulcrum of the hydraulic support moving in the fully mechanized coal face. Due to long time wear and tear, consumption is large, so scraper conveyor central trough is also the daily purchase of coal mine more scraper accessories. Because the scraper conveyor has different types, such as light, heavy, super heavy points, so for the scraper conveyor trough structure requirements are also different, so that the scraper conveyor trough category is also divided into several, such as welding central trough, casting welding central trough and integral casting central trough; Open bottom middle slot and back bottom middle slot; Middle canal of single bedded ear and middle canal of double bedded ear, etc. Although scraper conveyor 105S07 central trough structure is relatively simple, but it does not mean that it is not important in the scraper accessories, no matter the weight, no matter the size, scraper accessories have their own role and significance. So Henan Shuangzhi machinery has been all the same, no matter what scraper accessories pay attention to product quality, start from small details, so as to make the overall scraper conveyor normal operation.

HSSG SCRAPER CONVEYOR Flour Milling Machinery SCRAPER CONVEYOR HSSG SCRAPER CONVEYOR The HSSG series scraper conveyors are widely used in the conveying of grainy and powdery stuff in cereal and oil, feed- stuff, and chemistry and so on. The conveyors can convey horizontally or aslant below 15°. Cover made of high grade carbon steel. Chain made of high grade alloy Steel. Scraper made of nylon. Bottom plate made with wear-resisting manganese steel. With reducer. With anti-block system to protect working safety. Model HSSG 16 HSSG 20 HSSG 25 HSSG 32 HSSG 40 HSSG 50 Wheat capacity (t/h) 12-30 30-50 50-100 100-130 180-240 250-320 Power (kw) According to the length Pitch (mm) 100 125 125 125 160 200 Maximum conveying distance (m) 50 50 60 60 80 80

Used for Loading and unloading conveyor

Manufacturers of Conveyor Chain to International Standards, British Standards and industry standards. Chains also manufactured to customer specifications. Shipped Worldwide.