Fire Protection Suppliers and Manufacturers

DESCRIPTION Feature of free fall lifeboat: 1.Comply with the requirements and rules of SOLAS and amendment 1996, LSA Code, MSC.218(82), MSC.272(85)& MSC.81(70), MSC.226(82), MSC.274(85). 2.Boat body material: fire-pretended type FRP. 3.Fitted with release mechanism and free falls in to the water; 4.It can self-righting by itself when capsized; 5.Equipments is equipped; 6.The surface for walking is the antiskid; 7.Equip a manual pump remove the ponding in the boat; 8.Running time of rescue boat when full-loaded & full-speed is more than 24 hours. 9.Speed (full load): >6 knots 10.All seats are according to requirement of cosmetology, four point safe belt and cushion were fitted on seat. 11.Door was fitted at lifeboat stern, Natural ventilation is achieved via an automatic valve located on the front of superstructure. The valve will be above water in all heeling conditions ( 0 - 180 degrees ). The valve also prevents the cabin from becoming dangerously under-pressured while the engine is running. 12.A water spray system is installed for fire protection. The spray system consists of an engine driven pump, which takes seawater from the lowest possible location under the boat ensuring that no flammable liquid is drawn into the system. The spray system provides water over the entire surface of the craft ( tanker version only) 13.The compressed air system installed has a sufficient capacity to provide air from the maximum number of personnel and engine combustion for a minimum of 10 minutes. Toxic fumes or gas prevention have been made to recharge the air system from the ship's compressed air system (tanker version only)

Center Enamel supply a range of Glass-Fused-to-Steel fire protection water storage tanks suitable for use in automatic sprinkler systems and fire hydrant systems. We design, manufacture and installation these fire tanks for over 30 years, we are the first Glass-Fused-to-Steel tanks manufacturer in China. With compliance to NSF61,Center Enamel s standard range of water storage tanks for fire protection are available in 20 steres to 20,000 steres and meets international water tank design standards. Glass-Fused-to-Steel tanks are made from individual sections that have been manufactured and finished in a controlled factory setting. This allows each section to be formed according to strict structural specifications, with quality bends, welds and surface preparations that are monitored with compre hensive quality control measures. Once the sections are complete, they are powder-coated in a tightly-controlled environment, which results in a durable finish that virtually eliminates corrosion and maintenance issues; unlike field-welded tanks, which must be finished at the installation site, often resulting in an imperfect and inconsistent finished coating that is susceptible to corrosion and other damage. Glass-Fused-to-Steel tanks are created with superior materials that meet AWWA, NFPA, and FM Global standards, resulting in a long-lasting, durable product. They offer lifespans that are similar to, or longer than, concrete or welded tanks. Unlike competing products, they can easily be repaired by unbolting the damaged section, replacing it and installing new gaskets and fasteners. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. CEC Glass-Fused-to-Steel tanks are wildly used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.

Fire protection water storage tanks can be used in commercial, industrial, residential or rural areas for fire protection. In emergency fire situations, the demand for water may exceed the supply of household water pipes, especially in suburban or rural areas where well water supplies are limited. Therefore, it is very necessary to set up fire protection water storage tanks in commercial, industrial, residential or rural areas. The use of fire water storage tanks can greatly improve emergency fire protection work, and may even be used by hotels, commercial office buildings as automatic fire sprinkler systems for on-site water supply. Center Enamel Glass-Fused-to-Steel tank is the best choice for fire protection water storage tank. As the most professional Glass-Fused-to-Steel tanks manufacturer in Asia, we have many successful fire protection water storage projects in the world. All the Fire protection water storage Tanks are conformed to the American Water Works Association (AWWA) D103-09 and OSHA, also certified by NSF61. Compliance with both drinking / potable water storage standards and fire water protection standards allows the same Glass-Fused-to-Steel tank for both applications, as well as creating a dual use. In addition, we can customize the fire water storage solutions according to the requirements of customers and local conditions. High-quality design, meeting a wide range of international standards, constructed from corrosion resistant materials. Fire protection water storage tanks also can be designed to meet earthquake and wind conditions. Advantages of Fire Water Tanks 1. Short Construction Period: compare to over 90 days of construction time of concrete tank, it takes even less than 15 days for installation of GFS Fire Water Tank. 2. Beautiful Appearance: the color of glass fused to steel tank could be customized as the clients request based on Pantone Matching System. 3. Long Service Life: the Center Enamel GFS Tanks are designed to work in long service life as more than 30 years. 4. Tank Volume can be easily expanded: GFS Fire Water Tanks are not only easy to constructï¼? but also convenient to expand, remove and rebuild.

Features and Benefits Wider EPDM seat design, replaceable, its suit for different type of flanges. Streamlined SS304 disc. ISO5211 standard top flange, suit for different operations. Eccentric pin on the stem, not destroy structure of the stem, make sure the safety and strength. Signal feedback, with position indicator. Applicable Standards Design standard: BS5155, EN593, API609 Top flange standard: ISO5211 Flange standard: BS EN1092-2 Face to face standard: BS EN558-1 Pressure test standard: BS EN1074, API598 Technical Data Nominal Diameter:DN50~DN250 (2"~10") Nominal Pressure: PN16 Temperature Range: -5 C ~ +85 C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.

Features and Benefits 3 O-ring sealing,O leakage ,safe and reliable Fully vulcanized wedge,corrosion resistant Wedge with plastic guide rail on two sides, reduces friction, reduces toquet Full bore ,resilient seated ,no water head lost Electrostatically applied AKzo Nobel epoxy powder internally and externally Hand wheel operated with signal feedback device. Applicable Standards Design standard: BS5163 , AWWA C509 Flanges standard: BS EN1092-2, ASME B16.1, ASME B16.42 Face to face standard:BS EN558-1, ASME B16.10 Pressure test standard: BS EN1074, API 598 Technical Data Nominal Diameter:DN50~DN250 (2"~10") Nominal Pressure: PN16 Temperature Range: -5 C ~ +85C Suitable for: Water, ethylene glycol, non correction medium, etc.

Quick Details Place of Origin: Zhejiang, China (Mainland), Zhejiang, China (Mainland) Brand Name: Ningbo Onlyest safety helmet, ONLYEST safety helmet Model Number: OE-W-001 safety helmet, OE-SH-003 Product name: safety helmet Material: ABS/PE/PP safety helmet Sample: Available safety helmet OEM: Available safety helmet Color: Customized safety helmet Function: Anti-shock Certification: ANSI, CE, ISO9001 Supply Ability Supply Ability: 5000 Piece/Pieces per Week safety helmet Packaging & Delivery Packaging Details 1pc/bag 30pcs/ctn Port Ningbo port or Shanghai port Lead Time : Quantity(Pieces) 1 - 99999 >99999 Est. Time(days) 35 To be negotiated

Safety is the most important in workers dangerous workplace, Xinke Protective produces Fire fighter protection hood fire man retardant hood to keep safe. It is made of cotton fabric, which can pass EN 11611, EN 11612, NFPA 2112 standard. It is widely used in oil & gas, welding, construction etc. Industry. Xinke Protective has own garment factory, which is certified by ISO 14001, ISO 9001, SA 8000. UL CE. Fire fighter protection hood fire man retardant hood is suitable for your employees and required by law in wide industries and is regulated by numerous safety standards boards. FAQ OF Fire fighter protection hood fire man retardant hood Q: How to ensure your Fire fighter protection hood fire man retardant hood delivery time? A: Xinke Protective has own garment factory, 100,000 pieces of Fire fighter protection hood fire man retardant hood can be produced every month. Also we have automatic cutting machine to guarantee delivery time. Q: How to ensure your product quality? A:We have the most advanced international standard testing center, and six times quality inspection in production to ensure quality. Q: Do you provide sample? How long it takes? A: Sample can be provided. Regular item in stock can be sent within 1-2 days.Customized Fire fighter protection hood fire man retardant hood will take 7-10 days.

Manufacturers and distribution of all types of fire fighting equipment such as hydrants, couplings, nozzles, hoses, extinguishers, sprinklers etc.for water and foam-based systems.

Fabric: 65%polyester35%cotton 250gsm Specification: Jacket with folds in back Two chest pockets, pencil pocket on left arm. Front with zipper. Elbow and adjust around wrist and waist.

ABC fire extinguisher can be aplied at all types of fire that is wood, paper, plastic, oils, gasses. 7-8 kg is the total weight of the cylinder.

The fabric of Men's Flame Retardant Protective Fire Work Coverall is comfortable and soft. There are two-component fabrics to choose from. The fire resistant coverall comes with flame retardant reflective tape. There are many colors to choose from. If you need a protective fire coverall, you can Choose Xinke.

1m x 1m ;1.2m x 1.2m, 1.2m x 1.8m, 1.8m x 1.8m .

Fire fighting An enterprise integrated with design , production and marketing (independet import-export)of all kinds of fire fighting appliances and high-efficient water-based fire extinguishing agent.The company has for 17 years experience and have many customer and friends all over the world. Our main prouducts : 1)simple typ water-based(foam) fire extinguisher below 1l 2)portable type powder series extinguishers 1kg, 2kg3kg....12kg 3)portable water-based(foam) fire extinguisher 1l, 2l, 3l, 6l, 9l 4)portable water-based(foam) fire extinguisher-stainless steel 1l, 2l, 3l, 6l, 9l 5)trolly typ water-based(foam) fire extinguisher 25l 6)sd-ab high-efficient water-based fire extinguishing agent 7)cf series of fire prevention agent 8)cylinder:stainless steel and carbon steel

Viper - Passive Fire Protection Systems