HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe HFW Solid Finned Tube, High Frequency Welded Solid Finned Pipe
Extruded Fin Tube Fin material: Aluminium 1060,1050, 1070, 6063,6061,3003 fin type: extruded, Fin size: OD25mm~OD85mm, fin thickness:0.25mm~1mm, fin per inch: 5~12; Fin Length: 300mm~18000mm; Base tube material: SA179, SA789 S31803, SS304,SS316L, SA334, SA249, C44300, C68700, C71500, C70600, C12200, UNS8800,UNS4400, IN825,Titalium etc. Manufacture: A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube. Application: *Air water cooler unit *Product coolers - gas, chemicals, petrochemicals, oil etc. *Heat exchangers *Boiler,Dryer *Air condtioner, Air condenser
My heat transfer technology is a professional manufacturer of industrial fin tubes, widely used in dryer, air/oil-cooler, heater, heat recovery, heat exchanger etc., which is by adding the fins on the surface area or surface area of the heat exchange tube, so as to improve the thermal efficiency. Extruded fin tube Fin material: aluminium 1060, 1050, 1070, 6063, 6061, 3003 Fin type: extruded, Fin size: od25mm~od85mm, Fin thickness:0.25mm~1mm, Fin per inch: 5~12; Fin length: 300mm~18000mm; Base tube material: sa179, sa789 s31803, ss304, ss316l, sa334, sa249, c44300, c68700, c71500, c70600, c12200, uns8800, uns4400, in825, titalium etc. Manufacture: A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
Customized Bend Extruded Fin Tube,Finned Tube Heat Exchangers,Extruded Finned CS Alloy Serpentine Tube For Boiler Heat Exchanger.
The Extruded Fin Tube also known as� Bimetallic Fin Tube� is one of the most preferred finning processes for various applications. Manufacturing process: Fin is produced by the rolling method (three-roll oblique rolling). Its working principle is: The smooth tube is lined with a mandrel, the tube material is driven by the roller blade to make a spiral linear movement, and is rolled by the roller. The hole pattern composed of the groove and the core rod is gradually processed with fins on its outer surface. In order to facilitate the formation of fins, the rolling parts adopt three stages of biting, rolling, and shaping during the deformation process, so that the processed fins are complete, smooth, and regular. The finned tube produced by this method is based on the base tube and the outer fin is an organic whole, so there is no problem of contact thermal resistance loss and electrical corrosion. It has good heat transfer efficiency and strong resistance to deformation. Extruded finned tubes consist of a light pipe and fins â??attachedâ?? to it. The structural parameters are mainly the inner diameter and outer diameter of the finned tube, the wall thickness of the finned tube, the fin pitch, the fin thickness and the fin height. Material Options: We offer the widest range of material in the industry and can extend it on request in case of special requirements for heat conductivity, mechanical properties or corrosion resistance. Below are our regular materials` combination. A. Copper aluminum composite finned tube B. Steel aluminum composite finned tube C. Pure aluminum finned tube D. Pure copper finned tube Fin Height Options: A. Low finned tubes The fins of the low finned tube are extruded directly from the tube material. The fin height is only 1-2 mm. The common low fins are 1.6 mm in the shell- and-tube heat exchanger. This kind of finned tube does not need to consider the contact thermal resistance with the tube. B. Middle finned tubes The fin height of the finned tube is about 3.2 mm, which is often used in pressure vessel equipment such as shell and tube heat exchangers. C. High finned tubes The finned tubes are usually used in air heat exchangers, whose height is lower than 16mm, depending on working conditions. D. Customized specification, please reach to us for more details. Extruded Finned Tubes Characteristic: A. High heat transfer performance and low contact thermal resistance B. The contact area between fins and tubes is large, and the connection is tight and firm. C. Good corrosion resistance, stable performance for long-term use. D. Fins have good rigidity and are not easy deform. E. Light weight and Low cost. F. Low air resistance G. Easy to clean
EN12735 CU-DHP Heat Exchanger Copper Finned Tube Customized
Finned tube----extruded fin tubes Fabrication: The extruded fin tubes are produced by compressing an aluminum tube, or sleeve, onto the base tube. The bloom is exposed to very high pressures which essentially "grows" the fins into the final fin profiles.This process manufacture an excellent strong joint with great resistance (fin stiffness) as well as exceptional heat transfer capabilities (longevity, temperature range). The advantage of extruded fin tubes are full protection of bare tube against corrosion and fin has high mechanical strength. Extruded finned tubes provide the most stable performance over time as compared to the other fin types. The fin is rolled from an outer aluminum tube by a process using pressure to create a rolled "pressure bond" between the liner tube and fins. The aluminum fin material completely encloses the tube, except at the ends where a tube coating can be applied. Application: Primaily extruded finned tubes are used in high temperature conditions and corrosive atmospheric conditions, such as operating temperatures less than 300°c or off-shore applications, heat pipes air to air heat exchangers for hvac applications, air dehumidification in air treatment plants, energy recovery in air exaust system. This kind of fin design is the least economical as compared to the other fin types, main reason due to the increased amount of aluminum used around 40% also increased labors during the manufacturing. However this increased cost can be compensated if using lower grade parent tube material.
Murphy plate finned tube heat exchanger has some obvious advantages in operation, especially in the field of air to air heat transfer, especially in the field of ultra-high temperature air to air heat transfer. To a certain extent, it has become the upgrading product of the tube, heat pipe and finned tube heat exchanger. The main characteristics of Murphy plate finned tube heat exchanger: the finned tube heat exchanger can be designed with elastic structure, which can effectively solve the problem of its thermal expansion; there are rich test and actual operation data as support, through constant correction of the calculation formula, the calculation error is within 5%, and more than 95% of the equipment operation can reach the design parameters.
The economizer can be installed at the rear of exhaust gas stovepipe to recovery exhaust gas heat,increase the electricity output,lower the coal consumption spiral finned tube economizer is a new and efficient heat transfer equipment, which is a good solution to the light tube economizer because of badly worn, short life and other shortcomings. 1, material composition It is made of spiral finned tubes,inlet header,outlet header, elbow and other supporting material. 2, the structural arrangement Spiral finned tubes are in-line arrangement or staggered layout, water in the pipe. 3, Features heat transfer area can be greatly extended, reducing the volume and angle fittings, enhanced heat transfer. hard fouling Clogging: As gas flows through the finned tube forming the boundary layer, resulting in the vortex. adapting to wide temperature, high pressure;impact resistance low flue gas resistance
SEGMENT- Finned Tube evaporators
SEGMENT- Finned tube radiator
SEGMENT- Finned Tube Condenser
Copper finned tube is a heat exchange element. In order to improve the heat exchange efficiency, fins are usually added on the surface of the heat exchange tube to increase the external or internal surface of the heat exchange tube), so as to achieve the purpose of improving the heat exchange efficiency. The overall finned tube has no contact thermal resistance, good heat transfer performance, high strength, thermal and mechanical vibration, and good thermal expansion performance.
Tube CACW Cooler Radiator and Alternator Coolers Generator Air Coolers Air Water Cooler Stator Coolers KILN/Raw Mill / ID FD Fan Coolers
FITZER INCORPORATION, is engage in the field of Design, Manufacturing & Exporting various types of such as, Extruded finned tube, Serrated finned tube, Spiral finned tube, Crimped finned tube, wire wound finned tube, Helical finned tube, welded finned tube, H' type finned tube, Economizer coil, Spiral type Heat exchanger, Finned Tube Heat Exchangers, Oil coolers Fin Fan Coolers Process Gas Cooler, Air Heater, Air Pre Heaters, , Hydraulic oil coolers, Air Cooled Heat Exchangers & various types of Shell & Tube Heat exchangers / Evaporators / Condensers, Industrial Dehumidifiers, Blowers & Evaporative Condenser Other Products: - Block Ice Plant, Tube Ice Plants, Flake Ice Plants. Our brand chooses to stand firm in the Indian & International market with promise, Standard & guarantee. Established by two technocrats vast experience in Stainless Steel Fabrication, Thermal Heat Transfer Systems & Refrigeration HVAC equipment Our team result oriented Qualified Techno-Commercial Staff having spirit of team work, enthusiasm and a passion for excellence to deliver outstanding performance in the field of manufacturing GMP and Non GMP Equipments for Chemical, Pharmaceutical, Paints and Other Process Industries. We design and manufacture as per international standard such as ASME / TEMA Our products can be seen operating in refineries & petrochemical, pharmaceutical, chemical, marine, steel & various process industries.
Tube OD: 25-73mm. Tube Thk: 3.0-6.0mm. Fin Thk: 1.5-4.0mm. Fin Pitch: 9.0-30.0mm. Fin Height: 15.0-45.0mm. Square Fins are welded on 1 steel base tubes. We call it H Fin Type Tubing. Square Fin Tube with 90 Degree Bends, Rectangular Finned Tubes with 90 Degree Bends. Max. Working Temperature: 300 �°C. Atmospheric Corrosion Resistance: OK. Mechanical Resistance: Good. Fin Material: Copper, aluminum, carbon steel, stainless steel. Base Tube materials: Any material available, such as carbon steel Tube, ASTM A179, ASTM A192, ASTM A210, stainless tube ASTM A269, ASTM A213 T5 T11 T22 304 316. PRODUCTS DESCRIPTION: Features: HFin Tube is formed on both sides of the straight channel, can achieve good blowing effect.The space is compact, theoverall weight is reduced greatly, reduce cost H type fin can flow space uitilization effectively, keep the fin area and fin is larger thanthe thickness of the fin; can choose according to need any abrasion; fins are parallel to each other and independent, no effect of helxangle, which is convenient to ash. "HTYPE Fined tube can not only improve the windward side near the stagnation point speed, increase the axial purging.can increasethe leeward surface reflux disturbance again.The velocity distribution characteristics make H finned tubes is not easy to dust.
Product Description High Frequency Welded Stainless Steel Spiral Fin Tube Extruded Wound Finned Tube Aluminum/ Copper Fins Finned Tube Aluminum Fins Heat Exchanger Tube Product Description The spiral fin tube economizer is a newly type heat transfer equipment, consisting of spiral fin tubes to overcome the serious abrasion and short service time.Which consisted of series of spiral finned tubes, the headers of inlet and outlet, bend, frame and other auxiliaries Structure arrangement: in line/staggered arrangement Finned Tube Aluminum Fins Heat Exchanger Tube Features 1. The equipment body can be designed into many modules to ensure the long term and stable running. 2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage. 3. Improve the heat transfer efficiency. 4. Structure arrangement: In line or staggered arrangement. Finned Tube Aluminum Fins Heat Exchanger Tube Application Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers. Technical parameters PRODUCT TYPE TUBE MATERIAL FIN MATERIAL TUBE SIZE FIN SIZE Heat Exchanger Finned Tube Extruded Fin Tube All Kind of Material can be applied Aluminum A1100 15.88~50.8 7~11.5FPI Fin Height Max 16mmH L-Foot Fin Tube All Kind of Material can be applied Copper C1100, C1220 12.70~50.8 7~11.5FPI (Wrap On Type) Fin Height Max 16mmH G-Fin Tube (Embedded Type) Aluminum A1100, A1050, A1060 High Frequency Welded Finned Tube A179 Carbon Steel Tube Carbon Steel Tube 12.70~160 1.5~7FPI Stainless Steel Tube Stainless Steel Tube 0.8~3.2mm. Thickness Alloy Steel Material Alloy Steel Material Integral Copper & Copper Alloy High Finned Tube C12200, C11000, C70600 C12200, C11000, C70600 15.88~22.23 5~9FPI Max 12mm. H Oval Finned Tube Carbon Steel Tube Carbon Steel Tube All Size Available 5~15FPI Stainless Steel Tube Stainless Steel Tube Alloy Steel Material Alloy Steel Material Copper & Copper Alloy Tube Copper & Copper Alloy Tube Monometallic Fin Tube Low Fin Tube Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. -- 9.52~40 12, 16, 19 28 FPI, etc. Turbo-C Tube Turbo-E Tube Corrugated Tube All Kind of Material -- 6.35~40 2~9FPI High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided Description of Spiral Finned Tubes: The spiral fin steel pipes currently used are mostly wound, high frequency welded and brazed spiral fin steel pipes. High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided
Fin Type: H Type Fin Tube. Tube Material: Carbon steel, stainless steel, aluminum. Tube OD: 21.3mm-73mm. Tube Thickness: 2mm-7.62mm. Fin Material: Carbon steel, Stainless steel , Alloy. Fin Tube Length: No Limit. Max Working Temperature: 300 C. Atmospheric Corrorsion Resisitance: OK. Mechanical Resistance: Good. Fin Material: Copper, Aluminum, carbon steel, stainless steel. Base Tube materials: Any material available, such as Carbon steel Tube, ASTM A179, ASTM A192, ASTM A210, stainless tube ASTM A269, ASTM A213 T5, ASTM A213 T11, ASTM A213 T22, 304, 316. The advantage of the square fin tube: Increase tube outside surface and improve heat transfer efficiency. Reduce the number of tubes arranged for the heat exchanger equipments than bare tube. Reduce the flue gas velocity and reduce the wear rate and prolong the life-span for the equipment. H type fins have the best soot blowing effect due to the formation of straight passages on both sides. Can offer larger surface area than spiral finned tubes.
Asme standard boiler part h finned tube economizer with best price is a kind of boiler parts, to have two steel circular symmetry to be welded on fluorescent tubes to form fins positive shape much like letter "h", so called h-fin tube. H-economizer widely used in utility boilers, industrial boilers, marine power, such as the tail of heat exchanger components.
SEGMENT- Finned Tube Heat Exchanger-BIOTECH & PHARMA