Crude oil, bonny light crude oil, blco, wti, lpg, lng, diesel (d2,d6), jet fuel a1, en590 ulsd 10ppm, rebco, espo, lco, gasoline 91,92,95, bitumen, ifo cst 180, industrial chemicals, laboratory glassware, equipment, laboratory equipment & instruments, medical equipment, chemicals, glassware, plastic wares, filter papers & other laboratory consumables, reagents.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
We can supply Diesel en590 10ppm with very good price. Not necessary to follow seller process, seller will follow buyer own procedure. If you want we can immediately arrange a meeting with End seller Only for serious buyer
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
Food commodities, agriculture products, chemicals seeds: sesame seeds, watermelon seeds, gum arabic chemicals: sulphuric acid 98% hydrochloric acid 33% sodium hypochlorite 10 12% sodium hydroxide 50% caustic soda flakes caustic soda prills 99% chlorine calcium chloride 36% petroleum products: en590 10ppm diesel automobile oils, lubricants mineral motor oil 10w30, 10w40, 15w40,20w40,20w50 transmission oil complex dexron ii complex dexron iii complex dexron iiii complex type a brake oil complex dot 3 complex dot 4 complex dot 5.1 cutting oil hydraulic oil.Distribution, import, export, trading services
En590 and jet a1.Trading, intermediaries.
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a Fuel Supplier located in the USA, if your Buyer is looking for EN590 or A1Jet Fuel see SOP & pricing below. After reviewing the SOP and you are agreeable with the price please email or post to WhatsApp your LOI and I will open a group with my Seller Mandate. My SM will arrange a Zoom call with the Seller to discuss your requirements. TRANSACTION PROCEDURES FOB TANK TO TANK 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice alongside buyer tank storage agreement (TSA) for verification. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Irrevocable Commitment Letter to Supplier Tank Storage Receipt (TSR) Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm. 4. Seller provides buyer with SGS report, Injection Report, unconditional DTA. 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and provide the buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. 8. TARGET PRICE: EN590 / $650MT
EN590-10PPM No sanctioned source: Kazakhstan, Azerbaijan, Georgia or Qatar. CONTRACT TERMS: 12 MONTHS MINIMUN QUANTITY (WITH ROLLS AND EXTENSION) PAYMENTS TERM MT103 OR SBLC INSPECTION BY: SGS, INTERTEC, CAMIN CARGO OR SIMILAR. COMMODITY: EN590/ULSD < 10PPM First Lift: 50,000-100,000 Metric Tons Contract: 100,000-500,000 Metric Tons per Month X 12 Months with R&E FOB Price: Gross $530.00 USD /Net $510.00 USD per Metric Ton
Petroleum products like diesel en590 10ppm ulsd.
Direct from Kazakhstan Refineries, EN 590 Ultra Low Sulphur Diesel(ULSD) & Jet Fuel A1, tank to tank or CIF transactions are available. Kazakhstan origin with very competitive prices. Also available Azerbaijan origin EN590 10 ppm & Jet fuel A1 from state owned refinery.
Available for interested buyers 300,000 Mt for TTO on Malaysian water. MOQ: 100,000 Mt x 12 months Origin: JSC, Kazakhstan
Diesel Gas oil ultra-low sulphur diesel (ULSD) - EN590 10PPM Origins - Azerbaijan and Georgia MOQ: 20,000 metric tons MAX: 300,000 metric tons Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
we have offers for jet fuel A1 and diesel EN 590 fob Rotterdam tank to tank at very competitive prices for 1 or 2 million bbls A1 and 100.000- 200.000 tons EN590 buyers need to send ICPO and corporate profile together with TSA verifiable in Rotterdan once quotation approved Once CI are signed by both parties seller send PPOP and will; ask for buyer tank farm DTA signing to be sure buyer has tank space for inyection TSR will only be requested after fresh SGS delivered by the sellers
A) C.I.F. - COST, INSURANCE, FREIGHT PROCEDURE: 1. Buyer issues an official Irrevocable Corporate Purchase Order (ICPO), with Sellers procedures. 2. Seller issues Sales and Purchase Agreement (SPA) open for amendment via mandate to Potential Buyer. 3. Potential Buyer countersigns, duly initial by Co- Buyer and sends back to Seller the aforesaid SPA in Acceptance. 4. Seller issues, SGS report, Certificate of origin and product attestation letter to buyer. 5. Seller requests the nominated shipping company to issue the Charter Party Agreement (CPA) for Seller to sign with the shipping company as the Consignee to be shown on the Bill of Lading to whom the shipment is consigned. 6. Seller submits the Contract to the Ministry of Energy for Legalization and final approval and notarization (if required), Buyer and Seller make 50% payment of Shipment value via MT103 TT 7. Seller Legalizes the Draft contract, and send the final approved contract to Buyer via Secured Email service along with PPOP which include: Product Passport (Quantity & Quality Dip Test Analysis Report). Certificate of Origin. Copy of TSR (Tank Storage Receipt) at Loading Port. Legalized Contract (SPA). Export License. Fresh Data marine analysis Report Note: Freight Payment (50/50 between Seller & Potential Buyer). Such payment shall be deducted from the final cargo payment. 8. All parties involved in this transaction sign the NCNDA/IMFPA to product for all intermediary's commission(s) as payable by each side oneself separately. 9. Once Receipt of Payment as aforesaid Seller commences loading of the product into the chartered oil tanker vessel and provides the following shipping documents via CoBuyer to the Potential Buyer after loading: Ocean Bill of Lading Cargo Manifest Certificate of Insurance Certificate of Ownership Ullage Report SDS (Safety Data Sheet) The Quota Allocation Certificate issued by the Ministry of Energy 10.Upon vessel on arrival to the Discharge Port, Seller issues ATB/DTA via mandate to Potential Buyer and meantime directs the Captain to dock with the shipping agent along with inspection team to conduct Dip Test in the Vessel Tanker to confirm Q&Q. 11.Upon successful RESULT of Dip Test, Potential Buyer causes his bank to pay via Swift MT103 by T/T wire.
Petroleum products, en590 10ppm diesel, en590 diesel, jet a1, aviation fuel, jet fuel, d2 diesel, d6 diesel, petroleum coke, crude oil.Trade consultancy & representation
Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate, intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat.Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago) intermediation for sugar icumsa 45, yellow corn, wheat
Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots.Brokering services
Oil and gas commodities: crude, jet fuel, d6, en590, d2, mazut, petcoke, urea 46, coal, lng, lpg agricultural commodities: sugar (including icumsa 45, 150, etc), wheat, edible oils, wheat, corn, soya and soya products, meat.Corporate representation, business consulting, intermediation, brokering, agency.
