Product name: PN Mud Pump Model: PN Mud Pump Application: can be used for transporting solid-liquid two-phase fluid with mine Product overview Mud pump is a Horizontal single-stage single suction cantilever centrifugal slurry pump, can be used for transporting solid-liquid two-phase fluid with mine. Can also be used in building materials, paper, food, feed and other departments to transport all kinds of slurry. The maximum transmission, concentration of 50-60% (weight) Flow manufacturing using wear-resistant alloy material PN type slurry pump, long life. 6 "and 6" mud sand below the impeller and the shaft is connected with the screw, 8 "and 8" above the mud pump used in key connection. The gap between the blade and sheath and the impeller can be adjusted, to maintain efficient work. 8 "and 8" above the mud pump, the pump body is large, using open structure form level, the disassembly and the maintenance are convenient. Shaft seal packing seal used in general, work to win into higher than operating pressure of 1 kg / square cm shaft seal water. Model PN mud pump, according to the transmission direction, rotates in counterclockwise direction (including 1, 2, 3PN clockwise) Ye Lun with a screw connected with the shaft, if the rotating in opposite directions, Ye Lun will fall off from the shaft, causing the accident. PN Mud Pump
Our plants are specialized in producing wide range of replacement parts for triplex mud pump(such as fluid end module, liner, piston, valve&seats, and a full line of module parts) for brand name mud pumps, including emsco, national, ideco, gardner denver, oillwell, opi wheatly, wilson, wirth, ellis willianms, skytop, brewster etc. All items are manufactured to api 7k quality standards. Module descriptions: Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1mpa), 7500psi(52.7mpa), and 10000psi(70.3mpa); discharge connections available on each side; suction connections on each side or front center. Material is 35crmoa or 40crmonn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of jb/tq252-81, and should be checked by grade3 after quenching the rough module will be rough processed, then the hull hardness is hb285-330.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide). 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more. 3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner. 4. Pony rod and piston rod is made of premium quality, heat treated alloy steel. 5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Here we have all the types of submersible pumps like- 1) dewatering pumps. 2) wastewater pumps. 3) mud pumps. For removing all the wasteage and muds from the industries.
Lake Petro supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with: Hydril series "K" dampeners Emsco series "PD" dampeners Bomco series "KB" dampeners These units are dependable and reliable with API connections K-10,3000 psi, K-10,5000 psi, K-20, 5000 psi, K-20, 7500 psi, KB-45, 5000 psi, KB-75, 5000 psi, PD-45, 5000 psi, PD-55, 5000 psi
Fluid End Expendable Pump Parts 1)Precision machined to API standards 2) Material: Alloy steel&carbon steel Regular package or as consumer's request
Contact Shijiazhuang Ruite Pump Co., Ltd Add:Majuan Village, Nandong Town, Shijiazhuang, Hebei, China (Mainland) Tel:dsales3(at)ruitepump.com Fax:86-0311-89916995 Contact:Hillary Mob:18332439492
Hydroman Electric Submersible Mud Pump Description: Hydroman Electric Submersible Mud Pump for Mining Reclamation is a versatile solids handing pump designed for Mining and Dredging applications where the water is contaminated with suspended solids such as coal fines, sand, and mud. Used to remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas as well as to irrigate farms and ranches. The submersible electric motor is protected by a superior double mechanical seal and probes to detect water ingress into the mechanical sea oil chamber. The wear parts is fitted with an integrated agitator, come breaker; this will ensure that only particles of the correct size enter the chamber, plus creating adequate flow turbulence to keep suspended solids flowing.
Zidong pump of type zg, zgh gravel pumps are designed for continously handling the most Difficlut higher abrasive slurries which contain too big solids to be pumped by a common pump.They Are suitable for delivering slurries in mining, explosive-sludge in metal melting, dredging in dredger And course of rivers, and other fieldas. Type zgh pumps are of high-head ones. Construction of this pump is of single casing connected by means of clamp bands and wide wet pas- Sage.The wet-parts are made of ni-hard and high chromium abrasion-resistance alloys.The dischar- Ge direction of pump can be oriented in any direction of 360.This type of pump possesses the adv- Antages of easy installation and operation, good performance of npsh and abrasion resitance.
Forging is a kind of pressure of forging machinery for metal blank,make its produce plastic deformation in order to obtain certain mechanical properties of shape ,size and forging processing method . By forging can eliminate the metal smelting process of as-cast osteoporosis and so on.
Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance & repair. Technical specifications (1)type: horizontal triplex single acting piston pump. (2)rated input power 1000hp (3)rated speed: 130spm (4)stroke length 9"(228.6mm) (5)rated speed of pinion shaft 582 rpm (6)gear ratio: 4.48: 1 (7)valve standard: api7# (8)suction inlet 10" (9)discharge outlet 5 1/8" (5000psi) (10)overall dimension 205x94x100.5in (5200x2388x2550mm) (11)pump weight 44050 ib(20000kg)
Rongle provides a full line of replacement parts for most popular mud pumps. Mud Pump Fluid end Parts and Expendables Rongle provides a full line of replacement parts for most popular mud pumps worldwide,Include but not limited below: ¡¤F-350/500/800/1000/1300/1600/2200, FB-1300/1600 ¡¤TEE, PAH, PZ-7, PZ-8, PZ-9, PZ-10, PZ-11,PXL ¡¤T-500/800/1000/1300/1600 ¡¤W-440, W-446, W-1612, WH-2214 ¡¤7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220 ¡¤A-600-PT A-850-PT A-1100-PT A-1400-PT A-1700-PT International standard export packing or as client's requirement
Mono-Metal Liner Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc. Bi-Metal Liner The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields. Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
1. Sludge dredging pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. Such as dredging, suck gravel in the dredger, suck gravel in the course of rivers or lakes, delivering slurries in mining, explosive sludge in metal smelting.( type znh pumps are of high-head ones ) 2. Sludge dredging pump are widely used to dredger and dam in the rivers, ports and wharf over our country, such as changjiang river, huanghe river, liao river, and zhujiang delta. And also widely used abraoad, such as middle east, europe.
Specifications: 1.API drilling mud pump 2.Mud pump with long stroke 3.High quality, better price 4.Good after-sales All models mud pump for drilling rig: Optimum of parameter, increased the stroke length and displacements appropriately, lowered the stroke reasonably, thus improved the service life of expendable parts.This series mud pumps are widely used in oilfields and other industrial mining enterprises for well drilling and well repairing etc. This series mud pumps are strictly manufactured according to SY5138 standard of CNPC and are tested accordingly when leave factory.
Product Description: The Products can be supplied: 1. Mud Pump: 8P-80, 9P-100, 10P-130, 12P-160, F-500, F-800, F-1000, F-1300, F-1600, PZ-7, PZ-9, PAH, TEE, W-440, W-446, 3NB350, 3NB-500C, 3NB-800C, 3NB-1000C, 3NB-1300C, 3NB-1600 2.Plunger Pump: TWS600S, TWS2000, DOWILL300, HyT-400. 2. Skid- mounted & Pump Unit for each kinds of pump said above. 4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
1.API F 1000 triplex mud pump 2.Emsco mud pump 3.Mud pump with ISO9001:2008 certification 4.Precise designed mud pump 1.API triplex mud pump 2.Emsco mud pump 3.Mud pump with ISO9001:2008 certification 4.Precise designed mud pump F-1000 Triplex drilling Mud pump
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request. features: 1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel 2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder. 3. Available in various materials to meet a wide range of applications 4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
Lake Petro supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with: Hydril series "K" dampeners Emsco series "PD" dampeners Bomco series "KB" dampeners These units are dependable and reliable with API connections K-10,3000 psi, K-10,5000 psi, K-20, 5000 psi, K-20, 7500 psi, KB-45, 5000 psi, KB-75, 5000 psi, PD-45, 5000 psi, PD-55, 5000 psi
We can supply mud pump spare parts like mud pump liner including zirconia ceramic liner and high chrome bimetallic liner, Mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing. Chrome plates the same outer hull in lieu of sleeve to a maximum thickness. It is then machined and polished to a mirror finish. 1.Lake offers chrome-plated liners made from premium forged steel with the core plated by chrome. 2.The chrome-plated liners have hardening characteristics of 58 to 62 Rockwell C hardness. Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings. GARDNER DENVER:PZ-7, PZ-8, PZ-9, PZ-10, PZ-11 IDECO:T-500, T-800, T-1000, T-1300, T-1600 NATIONAL:7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-200, 14-P-220, K-700, K-700A, K-500, K-500A OILWELL:A-350PT, A-560PT, A-600PT, A-850PT, A-1100P, A-1400PT, A-1700PT EMSCO:F-500, F-800, F-1000, F1300, F1600, FB-1300, FB-1600, D-375, D-700, D225 LANSHI:3NB-1300C, 3NB-1000, 3NB-1000C, 3NB-800 QINGZHOU:SL3NB-1300A, QZ1000, QZ-500, QZ-350, QZ800, SL3NB-1600 RUSSIAN:8T-650, UNBT-600, UNBT-950, UNBT-1180L, UNBT-950A, UBT-400, BT-600, UB-590, UNB-600, 8T310, 8T650-01
