Pass box is used to transfer the material from lower cleanliness area to higher cleanliness area or vice-versa in the classified area and also known as the hatch. Pass box works as a barrier between two cleanliness level areas. A pass box, which is also called a transfer hatch or SAS pass (sterile access system), Static pass boxes are used to transfer materials between two rooms of equal cleanliness levels and are designed for minimal personnel movement while dynamic pass boxes are used to transfer materials from uncontrolled to controlled environments. Dynamic pass box works like an airlock or laminar air flow unit. We design and manufacture static and dynamic Pass Box and other clean room environment furniture as per the design and specification of our clients
Max throughput: Base: 1Gbps (load balancing), 450 Mbps (standalone) , 250 Mbps (peered). Higher performance available in Truffle E, EC, EF models. Max number of concurrent IP sessions: 150,000 (1,000,000 with Truffle E, EC, EF, EX models). Device management: Cloud based, SNMP, Remote Syslog, Email alerts. DHCP and DNS servers: DNS relay, Parallel DNS optimization, DHCP server. DDNS: Support for dynamic DNS for multiple interfaces WAN Configuration: Static IP, PPPoE, DHCP or passthrough. Failover-only or aggregate modes for cellular and other WAN ports. Interface binding. Routing: NAT and IP forwarding, QoS and inbound/outbound VOIP quality management
Our Moringa powder is grown in an all natural landscape with zero man made chemicals used in its production. The plants are cultivated in a lush dynamic forestry landscape lending them a tapestry of natural organic manures and root interactions producing a robust crop. The leaves are harvested at dawn with morning dew still present and taken to an indoor processing facility where they are then handled by a team of experts to wash 4 times to cleanse, then thresh the leaves from the stems, and dry them over a 24 hr process with a recycled pure air system running on a sustainable firewood furnace that feeds from our selective logging on our forest which is continually expanding in size. The moringa is taken down to a 4 - 7 percent moisture and is recognized as the purest moringa product in the country of Uganda. We are currently the only holders of the UNBS q mark standard meeting all requirements for mold, moisture, ash, and other contaminants for human consumption. The leaves once dry can be further crushed and then powdered to a very fine or larger size grind as per buyers specifications. It is then vacuum sealed in 2 - 5 kg food safe bags and boxed in 25kg boxes typically. We also provide customizable packaging solutions for companies seeking ready to use retail product packaging if needed. Buyers of our product have been truly amazed by our product quality as we have ensured that our leaves are treated with the utmost respect when it comes to handling and processing to ensure no sunlight degrades the quality and no contaminants are present when manufactured.
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
Electronic/mechanical universal testing m/cs, hardness testers, impact testers, torsion testers, dynamic balancing m/cs..
ST3200 OTDR (Optical Time Domain Reflectometer) is an intelligent optical fiber communication tester. This tester is easy to use and portable, which has a 3.5-inch color LCD touching screen. It also possesses events intelligent analysis and more user---friendly operation. It is an ideal test instrument for the fiber testing and troubleshooting. It can test the length of optical fiber and optical fiber cable attenuation coefficient. It can exactly display the loss distribution curve of the optical fiber and cable as well as the loss between two points and the joint loss. It also can test the distance between two points and the position of joint, fault point as well as breaking point. This tester has VFL (Vision Fault Locating) system. So it becomes convenient to test the fault location of jumper wire. Main functions: * Test the distance between two points and dynamically display the distance between two cursors * Test the loss between two points and the loss constant of the optical fiber and cable * Test the joint loss * Auto-optimization and quick response * Search for the event points automatically * The function of wave form storage: it can store the wave form data and test condition into the disk and the stored information also can display again. * Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly. D, w, h: 200mm, 100mm, 60mm.
Electronic universal testing machine, hydraulic universal testing machine, computerized electronic-hydraulic servo univrsal testing machine, electronic-hydraulic static & dynamic universal testing machine, hydraulic pressure testing machine, friction & wear testing machine, artificial plat testing machine, building energy-efficient testing machine, door & window testing machine, plastic profile testing machine, color concrete tile production equipment.
NAME OF THE PRODUCT : POTASSIUM IODIDE BP/EP/USP/IP STRUCTURE : KI COMPOSITION : IT IS IONIC , MADE OF K+ ION AND I-ION IN 1:1 RATIO CHEMICAL NAME (IUPAC) : POTASSIUM IODIDE PROPERTIES : ANTITHYROID ,ANTIFUNGAL,EXPECTORANT USES : ANTI-THYROID, FILM PHOTOGRAPHY, INTERMEDIATE FOR PHARMACEUTICAL SYNTHESIS, LCD/TFT, NYLON, POLYAMIDE, DISINFECTANT, ANTIBACTERIAL, TREATMENT FOR EXPOSURE TO RADIOACTIVITY. IODIZED SALT, ETC. PACKING : 25 / 50 KG. HDPE DRUMS & 25 KG. KRAFT PAPER BAGS CUSTOMIZED AS PER BUYER REQUIREMENTS SHELF LIFE : EXPIRY DATE: FIVE YEARS FROM DATE OF MANUFACTURING. STORAGE : STORE IN CLOSED CONTAINER IN COOL, DRY PLACE & PROTECT FROM LIGHT, HEAT DUST & OTHER CONTAMINANTS.
PCB high-precision instruments and equipment like UV laser cutting machine PP(prepreg) cutting machine TDR impedance tester ionic contamination tester X- ray inspesction machine, hole checker 2D image measuring instrument.
Scope This instrument conforms to sh / t0093 and astm d2276 m1l-t-5624n standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants. Features 1, the instrument for the desktop, stainless steel control panel, ceramic coating; 2, digital timer, fengming alarm; 3, the evacuation time can be set arbitrarily; 4, low noise pump; 5, the standard glass fittings, conforming to astm standards; 6, using molding and metal clamp; Technical parameters 1. Filter: vacuum pumping 2, vacuum degree: 80kpa 3, machine power: 500w 4, the working units: a standard filtration system 5 power supply: ac220v / 50hz 6. Timing: digital timer
Anti-static products such as wrist straps, heel straps, testers, digital grounding system monitor, conductive packing band.Engineering & technical services: grounding system testing, electrical system saftey audit
The static constant loading tester is designed to determine the resistance to the axial static constant load of the plastic manhole. At the end of test, the sample appearance determines the deformation ration of the plastic manhole. Static constant loading tester is mainly used to determine the resistance to the axial static constant load of the plastic manhole. A constant force is steadily loaded on the axial direction of the manhole for the specified time, when a test is finished, observing the sample appearance (deformation, collapse, crack or crazing), determine the deformation in the axial direction and calculate the deformation ratio of the manhole. Jjicl is also suitable for ring stiffness test, flattening test, ring softness test of thermoplastic pipes.
Product Name: Completed Flexible Cables Static Flexibility Tester Model No: ZLT-QL2 Price Terms: Ex-work, FOB,CNF Standards: IEC60245-2 clause 3.2 and figure 2 Payment Method: By T/T, Skype MOQ: 1 PC Delivery Time: In 25 Working Days Packaging: In Plywood Carton
Eltek Flatpack2 Rectifier Module 110V 2000W HE WOR 241119.805 Overview High efficiency and reliable rectifiers The most efficient power conversion module in the industry! Since the launch the Flatpack 2 family has expanded into a wide selection of power ratings and voltages Key Feature Proven Reliability High Power Density Application Flexibility, 2kw - 2m Accepts Dc Input (Dc/ Dc Converter) Global Compliance (Ce, Ul, Nebs) Marine & Offshore Certification Patented Technology Digital Controllers Applications Power Utilities Switch Tripping Control & Protection Systems Emergency Lighting Railway Infrastructure Converter Stations Power Stations Various other applications in demanding industries like marine, oil & gas, process etc. Specifications Part number 241119.805 Model 110-120 / 20A HE INPUT DATA Voltage range (nominal) 176 - 277 V AC 1) Voltage range 85 - 305 V A 1) C Frequency 45 - 66 Hz Maximum current 18.64 ARMS Power Factor 0.99 (@ 50-100 % load) THD (@ 230 VAC) < 4 % (@ full load) Protection Varistor for transient protection, fuse in both lines, shutdown above 300/ 305 V OUTPUT DATA Default voltage 122.5 V DC Voltage range 90.02) - 151.25 V D 1) C # Pb cell supported (1.8 - 2.4 V DC/ cell) 54 -60 # NiCad cell supported (1.05 - 1.65 V DC/ cell) 86 - 91 Max power, nominal input 3025 W1) Max power, 85V input 1280 W Max current 20 A Hold-up time, default voltage and 1500 W load 10 ms, VOUT > 99.7 VDC Current sharing �±5% of maximum current from 10 to 100% load Static voltage regulation �±0.5% from 10% to 100% load and nominal input Dynamic voltage regulation �±5.0% for 10-80% or 80-10% load variation, regulation time < 50ms Rippel and noise, 30 MHz bandwidth < 500 mV PP Protection Overvoltage shutdown, short circuit proof, high temperature, hot plug -in inrush current limiting, ORing diode
Product Description The new designed Barrier Washer Extractor meets the need of bacteria-free and anti-static requirements. Our newly designed Gl hospital washing machine meets the requirement of germ-free, dust-free, anti-static washing needs. With isolating hospital washing machine and wall partition, it divides the laundry room into two separate independent operating areas, via: Clean area and Non-clean area. Launderettes will be loaded into the hospital washing machine through the door from the Non-clean room side after washing unloading will be from the Non-clean room polluting the clean room. Thus it prevents the clean launderette from being contaminated again and get infected. This isolating type of hospital washing machine from our company is of one of the most advanced standard, well built, economical to operate, easy maintenance and of good performance . They are widely used by hospital, food and pharmaceutical factories, nuclear power plants etc. Where extreme dust and germ-free environmental requirement for laundry room are needed. It is the ideal laundry equipment for such situation
Pooja Enterprise manufacture high quality disposable laboratory coats are made from a strong, breathable, liquid resistant material, which makes for a comfortable lab coat that is more functional than its cotton counterpart. Disposable lab coats have many cost and contamination benefits. Our customers have stated that they prefer the features of the Optimum Disposable Laboratory coat to the more expensive Tyvek brand. The laboratory coat material allows the skin to breathe while resisting the penetration of many non-hazardous liquids and particles. Our laboratory coats are manufactured from 53g microporous material, the same material as our Optimum Type 5&6 coveralls. The garments have a high quality front zip and have comfortable latex free knitted cuffs. Cleanroom Supplies laboratory coats are manufactured from electro-static dissipative microporous material. Our disposable lab coats have many cost and contamination benefits, including eliminating the cost for laundry Product Detail Product disposable Lab Coat Material Non-Woven/SMS/SMMS/Laminated Certification ISO, CE, GMP Standard international Size Small, Medium, Large, XL,XXL. Color Blue,White, Green, Can be customize. Weight 25GMS,35GMS, 40GMS. Package 50 Pcs/Carton Production Capacity 20000 Pcs per day Production Style Automatic Machine Sterilization No/Yes Specification As per requirement Feature and uses Food Industry ,Medical & Pharma. Storage Room temperature Disposable Yes Pre Order your requirement Bulk Quantities Available Meet International Standard Packaging is Customizable as per client need
TMI 45.9.9.200418 - ISOLATED WASHING DEHYDRATION MACHINE Product Description This new designed isolating type of washing and de-watering machine meets the requirements of sterile, dust free, anti static washing needs. With the isolating type of washing equipment and isolating wall, the laundry zone is divided into two separate independent operating areas. "Clean" area & "Non Clean" area. The washing will be loaded into the drum from "Non Clean" area. After that it will be unloaded from "Clean" area. Thus, it prevents the clean washing from being contaminated and get infected again. This isolating type of washing machine is with advanced technology, reasonable structure, economic running, convenient maintenance and good performance. It is widely used by microelectronics manufacturing, hospital, food and pharmaceuticals production, nuclear power plants etc., where a extremely strict environmental requirement of dust-free and sterile for laundry room. It is the ideal laundry equipment for such situation. Technical Details Model: 45.9.9.200418a Rated Washing Capacity: 35 Drum: Washing, even spread, medium de-water, fast de-water rotation limit set by VFD Drum Diameter: 750 Depth: 800 Motor Power: 4 VFD Capacity: 5.5 Cold Water in-let: G1" Hot Water in-let: G1" Stream Joint: G1/2" Drain: G3" External Dimension: H: 1850 D: 1200 W: 1580 Machine Weight: 1570 Model: 45.9.9.200418b Rated Washing Capacity: 50 Drum: Washing, even spread, medium de-water, fast de-water rotation limit set by VFD Drum Diameter: 750 Depth: 1140 Motor Power: 5.5 VFD Capacity: 7.5 Cold Water in-let: G1" Hot Water in-let: G1" Stream Joint: G3/4" Drain: G3" External Dimension: H: 1850 D: 1200 W: 1920 Machine Weight: 1750 Model: 45.9.9.200418c Rated Washing Capacity: 70 Drum: Washing, even spread, medium de-water, fast de-water rotation limit set by VFD Drum Diameter: 950 Depth: 990 Motor Power: 7.5 VFD Capacity: 11 Cold Water in-let: G1" Hot Water in-let: G1" Stream Joint: G1" Drain: G4" External Dimension: H: 2100 D: 1450 W: 1840 Machine Weight: 2250 Model: 45.9.9.200418d Rated Washing Capacity: 100 Drum: Washing, even spread, medium de-water, fast de-water rotation limit set by VFD Drum Diameter: 950 Depth: 1420 Motor Power: 11 VFD Capacity: 15 Cold Water in-let: G1 1/2" Hot Water in-let: G1" Stream Joint: G1" Drain: G4" External Dimension: H: 2100 D: 1450 W: 2270 Machine Weight: 2500 Model: 45.9.9.200418e Rated Washing Capacity: 140 Drum: Washing, even spread, medium de-water, fast de-water rotation limit set by VFD Drum Diameter: 1200 Depth: 1240 Motor Power: 18.5 VFD Capacity: 22 Cold Water in-let: G1 1/2" Hot Water in-let: G1 1/2" Stream Joint: G1" Drain: G5" External Dimension: H: 2400 D: 1750 W: 2170 Machine Weight: 3100
Product Introduction SF6 intelligent micro water quality tester is developed and designed according to the national power industry standard DL t506 2007 insulation gas humidity measurement method for sulfur hexafluoride electrical equipment and adopts the imported high precision dew point sensor and new digital circuit control technology. It is a high-precision intelligent instrument to measure the trace moisture content in SF6 gas. This instrument adopts intelligent self calibration technology wide measurement range fast response high accuracy good linearity dynamic display of measurement curve. At the same time the instrument also has an automatic dryer which can greatly reduce the measurement time. Technical Parameters Measuring range Dew point value 80 20 Moisture content 0 19999uLL Accuracy of measurement 0.5 60 20 1.0 80 60 The resolution of the Dew point value 0.1 Moisture content 1uLL Response time 20 0.1mpa 63 needs 5s 90 needs 45s 60 20 63 needs 10s 90 needs 240s 20 60 Sampling flow 0.6L min 20 Pressure range 01.0Mpa The use of temperature 20 60 Environmental humidity 0 100 RH Storage temperature 20 80 Charging time 4 hours The whole machine size 250 150 300mm3 The weight of The machine 3.5kg
VLT-PLC Vacuum Leak Tester (PLC Model) (Air and water tight test box: vacuum test) Tests on: Bottles: Glass or PET and Preforms Caps: Aluminum, other metal, plastic Cans: Aluminum, others Pots: Caps, film, blisters etc. Characteristics & Specifications: • Vacuum adjustable up to - 999 mb. • Box with dimensions upon request. • Box made of polished transparent PMMA (very rugged). • Easy to use and safe by touch screen PLC Control Panel. • Dynamic display: Testing status / Date and time. • Display: Product name / Operator / Batch No. / Sample No. • User defined test cycle (up to 16 modes). Pre-define up to 4 steps of each test. Vacuum level and holding time are adjustable for each step. Satisfy different kinds of testing request. • Easy operation by selecting the pre-defined mode for starting a test. No need to set the parameters each time. • 10 operators and 30 products memory. • Lot No. and Sample No. editable. • Review of the testing curve. • RS232 C output. • Resolution: 0.1 bar. • Accuracy: 0.5% of the measure. • Delivered with high performance vacuum pump. • Quick and easy verification and calibration.
Pharma Grade Bags are exclusively designed for pharmaceutical products so that the products are in very good condition and are free from unwanted contamination Food Grade FIBC Bags are made to put foodgrade raw material into bags Relevant authorities approve the raw materials and fabrics used in the production of Pharma Grade Bags We ensure that the metal detection and cleaning process is applied to prevent the bags from dust germs and pollutants Individual inspection of the bags on the light table is always performed We make sure that loose threads and tapes are prevented Applications of Pharma Grade FIBC Maintaining logistics for the pharmaceutical industry is a matter of huge responsibility as one cannot compromise on the quality and have to vehemently safeguard the products from contamination assistance of a Pharma Grade FIBC Some of the major applications of Pharma Grade FIBC are highlighted below Pharma grade FIBC is used for the storage of pharmaceutical products and since they provide safeguard against contamination Pharma grade FIBC protects pharmaceuticals from dust and other foreign particles and hence can be used for transportation of medical products With Pharma grade FIBC resistance against moisture it is an ideal product for the movement of pharmaceutical goods Pharma Grade FIBC is spillage proof and hence can be used for dealing and storing chemical items in different industries Pharma grade FIBC being airtight and resistant to weather corrosives can be used as an ideal dumping strategy for pharmaceutical and chemical waste products since it is environmentally friendly and protects the environment from chemical contamination Pharma grade FIBC can also be used for storage of powder and other similar structure chemical products since it prevents the product from building static electricity ensuring large safety in case of transportation or storage of such products These utilities highlight the various applications that Pharma Grade FIBC is used for in different pharmaceutical and chemical industries
