Double Beams Overhead Crane Suppliers and Manufacturers

QE Model double trolley overhead crane is suitable to lift long materials(wood, paper tube, pipe and bar) in workshops or outdoors to store in factory and mines. The two trolley could work separately and at the same time. QE double girder overhead crane are mainly consists of Girder frame, Crane travelling device, two lifting trolley and electrical parts. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity; crane travelling mechanism adopts separate drive. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened. It is rely on the bridge frame along the workshop rail direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. It is an excellent choice where high speeds and heavy service are required. As the widely used hoisting machinery currently especially is suitable for working at warehouses and freight yard and other department it is prohibited to use the equipment in the combustible, explosive or corrosives environment.

Double beam gantry crane is a variant of gantry crane. There are double-beam gantry cranes, as well as single-beam gantry cranes. It is mainly used for loading and unloading of outdoor cargo yard, storage yard cargo and bulk cargo. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability, and strong versatility. They have been widely used in port cargo yards. Its metal structure resembles a door-shaped frame. Two feet are installed under the main beam, which can directly walk on the ground track. The main beam can have outriggers at both ends. Gantry cranes are bridge-type cranes where the bridge is supported on the ground track by the legs on both sides. It is structurally composed of a mast, a trolley operating mechanism, a crane trolley and electrical parts. Some gantry cranes have outriggers on one side, and the other side is supported by a factory or trestle, which is called a semi-gantry crane. The gantry crane consists of the upper bridge (including the main beam and the end beam), the outriggers, and the lower beam. In order to expand the working range of the crane, the main beam can extend beyond the legs to one or both sides to form a cantilever. A crane trolley with a boom can also be used to expand the crane's operating range by tilting and rotating the boom.

Hoist double-beam bridge crane has the advantages of compact dimensions, low building headroom, light weight, and low wheel pressure. This product is mainly applicable to the transfer, assembly, maintenance and loading or unloading operations of mechanical processing workshops, auxiliary workshops of metallurgical plants, warehouses, stockyards, and power stations. It can also replace ordinary double-beam bridge cranes for production workshops in the light textile industry and the food industry. The work type is light and intermediate, and the working environment temperature is -20-40 ° C. It is prohibited to use in flammable, explosive, and corrosive medium environments. Our company mainly produces hoist double-girder bridge cranes with rated lifting capacity below 63 tons.

Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size

Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size

We make customized rolling, sliding gates, collapsible gates for home, commercial building factories etc. These gates come in Aluminum, Stainless Steel or in Steel. The surface is powder coated to last many years after installation. These gates can be installed on tracks or without tracks. Every aspect of the gates can be customized. These gates are easy to operate with minimal effort. Our standard dimensions Height 1600mm (height can customized) Stretching ratio: 1:0.17 + 0.42 (can be customized) Gate Minimum length :2 Meters Gate Maximum length: upto 90 meters ( double Gates) Operation: Hand operated, Motorized. Colors available: Blue, Red (colors can be customized) Please contact us for competitive pricing.

For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.

Jumbo Bags : Name : Big bag/Bulk bag/Jumbo bag/FIBC/Super sack/Ton bag Raw Material : Polypropylene virgin material Color : White, blue, Beige, or whatever Printing : Onside or both sides in multi-colors,offset print color print Size : As the customers requirement Type of bag : U-panel,Circular,baffle Weave : 10x10,12x12,can be customized or as the customer requirement Denier : 700D to1000D Weights/m2 : 120gm to 240 gm or as the customers requirement Feature : Breathable and airy, anti-static, UV stabilization, reinforcement dust-proof, moisture- proof Sealing : Single/double fold saw bottom Top Filling : Top full open,top skirt,top filling spout Bottom : Flat bottom,discharge spout Saftey factory : From 3:1 to 6:1 Liner : coated or with liner bag for moisture proof Usage : sand,cement, chemical,mineral,sugar,food,flour,etc. Packing : 20pcs/bundle(bale), or as the customized MOQ : Above 1000pcs Delivery Time : 20-30 days after place an order Trade Term : FOB Payment Term : T/T

Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control

Product introduction The double-beam crane main beam by a wide variety of steel welded, the structure is very complex. There are some problems that cause main beam deformation, such as the thin structure, needs to be improved. This paper combined with the finite element model of plate and beam to solve analytical challenges. Determine the dynamic load impact factor, the finite element analysis of the double-beam crane box-type structure of main beam, on the basis of the above, and the main beam finite element computer simulation reinforcement of the four program design and to compare. The strength of the best programs 38.7% higher than the original beam and stiffness 33.9% higher than the original beam. Product model and Application 1. QD model 5-50/10t overhead crane with hook is mainly composed of bridge, running gear of crane, trolley and electrical device, etc. It is divided into two working classes: A5 and A6 according to the use grade and load-up condition. 2. There are three kinds of method for entering the platform of cab: from the side, from the end and from the top. The figure is the side entrance; arrowhead Ashows the end entrance; the top entrance is at the place there is no door. 3. The figure shows that the cab is mounted at the left end. 4. Safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the opposite side of the cab (same as the figure) or at the sameside of the cab. 5. Operation of the crane shall be finished in the cab completely. 6. Ho is the in creased height of buffer of the crane, H0¡¨¹250. KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge. Plywood Case

Double Girder Overhead Crane Double Girder European Overhead crane is based on advanced technology and international standard: FEM (Europe), DIN (Germany), ISO(International), is the renewed product, is an intelligent crane. Its structure is much more reasonable and its assemble is more superior. The limiting size is the lowest between the top of crab and the track of trolley, reduces 20%-30% compared to traditional Double Girder Overhead crane, and can reduce the capital of workshop 20% efficiently. It has hard-tooth reducer, imported wire-rope, trinity drive. It is equipped with such protecting devices as alarm device to overloading, obliquely hanging, second protecting equipment preventing hook clashing, current phase protection, etc. the electric appliance adjusts speed without contact or spark module, and fulfill converter function, including mini-speed and double speed, which make traveling and lifting very steady. Double Girder European Overhead crane lifting capacity is from 5t to 500t, span is 10.5~31.5m, work environment is -10 to 40 degree, working duties are A5-A6. Must not use for lifting blazing & melting metal, toxicant, explosion-proof or other dangerous material. 1) capacity: 5T-50/10T. 2) span: 10.5m-31.5m. 3) Lifting height: 3-60m 4) Working grade: A5, A6 5) Remote or Cabin Control 6) Lifting speed: 0.1-8m/min 7) Cross travelling speed: 2-30m/min 8) Long travelling speed: 2-45m/mim Double Girder Gantry Crane Feature * Small dimension, light dead weight, small wheel pressure * Lifting limiting distance is minimum from hook to floor, lowest headroom, lifting height more higher, increases work efficiency * New workshops can be designed more smaller, save a amount of money from initial construction investment * Strong rigidity, light dead weight, low power, outstanding structure * Applicable to the transfer, assembly, check, repair, load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouses, goods yard and power station. * Spreader optional, hook, grab bucket, magnet chuck and so on. * Schneider electrical, ABM/Nord / SEW triple gear motor * Galvanized high strength wire rope * Self-adjusted disk brake, hard tooth reducer

Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.

QD Double Girder Hooks Overhead Crane Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.

Single Girder Beam Bridge Overhead Crane European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5 Working temperature: -25 to +42 centigrade Three control methods: Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers. Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger. Cabin room control: A.Designed by Man-machine engineering principle B.The driver seat has adjustable height and rotation. Product classification Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know. LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods. Capacity: 1ton-20ton Span: 7.5m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with European type electric hoist LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 OR MD1 electric hoist LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. Capacity: 0.5ton-10ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working with CD1 or MD1 electric hoist

This double girder overhead crane with electric hoist is for lifting 5t~50t stuff. It's very convenient to install in new or existing workshops. This crane is easy to operate with various functions. With the advantages of compact structure, light weight and high lifting height, double girder overhead crane with electric hoist is widely used in workshops, metallurgy, warehouses and assembly shops etc. Weihua double girder overhead crane with electric hoist has beautiful box-typed welded main girders. Computer optimized design for main girders with good performance and light weight. And the span reaches 40 meters.

The crane is composed with Girder frame, Crane travel device, and the trolley with lifting and moving device. There are Pave the rail for the trolley move on the main girder. Assemble the moving table on the outside of the two main girder, one side is prepare for the assemble and maintenance the crane move device, another side is prepare for the assemble of the trolley conductor device. There are full field of view Cabin suspend under the main girder, there are joint control desk or single control box packed within the Cabin, assemble the sidelong ladder between the Cabin and moving table, The main girder joint with the two side end carriage which with the joint point in the middle.

Pearl barley (double polished)

Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers.

ABUS double-girder overhead travelling cranes Load capacity: up to 120 t Span: up to 40 m(depending on load capacity) Easy to install accessories High crane and trolley travel speeds possible Wide range for connection variants for optimum adaption to local conditions Very high hook positions possible