ZC-A300 Dental Chair Package (2020 Type ) ZC-A300 Dental Chair Package (2020 Type ) In order to ensure smooth operation and patient comfort, ZC-A300 2020 type dental chair packages are fully flexible for the dentist to make treatment easier. Features The doctor table is equipped with a big tray and a rotary handpiece holder, which is extremely practical. The light arm that moves up and down in a large range can be close to the patient during treatment and be moved away after operation to avoid knock. The stable, durable and wide patient chair is designed with lumbar support, ensuring optimum patient comfort especially when lying on it.
Integral Dental Unit(DTK-898) Water tubes and suction tubes are from USA,air and water system is control by Italy valves Suspension Type design, optimal comfort when adjust the chair position Spittoon and assistant system, which are positioned by intelligent remote control, makes it much simpler for patient to spit and effective for doctor to operate equipment Intelligent LCD display screen and touch control panel with 12 position memorize Aluminum base for the backrest and strong steel base for the chair, strong enough for heavy patients Denmark "Linak" Electric Motor LED Sensor Operation Lamp STANDRAD CONFIGURATION Dentist stool DTK-010, same color with dental chair: 1 set Imported(4-hole) high-speed air turbine handpiece tie-in 2 sets Imported(4-hole) low-speed air turbine handpiece tie-in: 1 set Three-way syringe(cold and hot): 1 set each Built-in clean and disinfection system for water pipe in machine X-film viewer(DC/Low voltage) Super sensor operation lamp 1 set Water supply control system for cup filler and bowl rinse 1 set Handpieces water purified and air purified system 1 set Back position with negative angle compensation function Foot controller 1 set Dental stool 1 set SPECIFICATIONS: Power supply voltage------------AC220V,50Hz Air source presssure------------ï¼?0.55Mpa Water source pressure-----------0.2Mpa-0.4Mpa Optional: Scaler Camera and monitor NSK hand piece Air Compressor Central suction machine Intra Oral Camera
INTEGRAL DENTAL UNIT (DTK-896) Intelligent control system with 9 position memorize,adopts LCD display which makes direct and complete and operation more easy Ceramic spittoon can be removed, can be heat sterilized; 180-degree rotation LED Sensor operation lamp Rotary assistant position Huge sofa STANDARD CONFIGURATION Imported (4-hole) high-speed air turbine handpiece tie-in 2sets Imported (4-hole) low-speed air turbine handpiece tie-in 1set Three-way syringe (cold and hot): 1set each All directional head rest: 1set Strong and weak suction: 1set each Super sensor operation lamp: 1set X-film viewer(DC/low voltage): 1set Water heating system: 1set Whole ceramic spittoon: 1set Sanitary seamless cushion and backrest: 1set Dentist stool: 1piece SPECIFICATIONS Power supply voltage: AC 220V, 50Hz Air source pressure: >0.55Mpa Water source pressure:0.2Mpa-0.4Mpa OPTIONALS Imported 4 hole high speed air turbine handpiece Imported 4 hole low speed air turbinehandpiece Endoscope system Scaler Curling Light
Electrical, low-voltage
* she is a 24-hour with you private dentist * she is a novel, complete-function, well made of dental equipment * she is a clinic which can be drag, lifted and carried! * she has all the common optional what the mounted dental chairs have, and also * has fabulous magnetostriction comprehensive treatment device, achieving the therapeutic effect of common clinic. Dismension:592*413*281mm; Weight:24.5kg
JW 031C Power Supply:220V 50HZ /220V 60HZ/110V 60HZ Power : 0.7HP Air Flux: 62L/min(0.4Mpa) Noise:58dB Max Pressure:0.75Mpa Start-up Pressure 0.5Mpa Rev. :1400r/min Capacity:30L
JW-032B Power Supply: 220V 50Hz / 220V 60Hz / 110V 60Hz Power : 1.1HP Air Flux: 100L/min(0.4Mpa) Noise:65dB Max Pressure:0.75Mpa Start-up Pressure 0.5Mpa Rev. :1400r/min Capacity:40L
JW-032A Power Supply: 220V 50Hz / 220V 60Hz / 110V 60Hz Power : 1.5HP Air Flux: 124L/min(0.4Mpa) Noise:68dB Max Pressure:0.75Mpa Start-up Pressure 0.5Mpa Rev. :1400r/min Capacity:55L
JW-032A Power Supply: 220V 50Hz / 220V 60Hz / 110V 60Hz Power : 1.5HP Air Flux: 124L/min(0.4Mpa) Noise:68dB Max Pressure:0.75Mpa Start-up Pressure 0.5Mpa Rev. :1400r/min Capacity:55L
Standard accessories Four-way high speed air turbine h.P. 2 sets Four-way low speed air motor h.P. 1 set Three way syringe (cold and hot·¼1 set Water suction and saliva ejector 1 set Operation light 1 set X-film viewer 1 set Water purified system 1 set Dental stool 1 piece Specifications Supply pressure ~220v, 50hz Air pressure >0.55mpa Water pressure 0.2mpa~0.4mpa
Kjz laser instrument Popular with DENTISTS Small volume,Light weight,Easy operation,No pain,Fastness therapy,Slight heat damage,Short period of ulcer healing,Stable and reliable performance,Wonderful curative effect KJZ LASERINSTRUMENT FOR ORAL CAVITY, based on oral cavity characteristics, is mainly applied to pure gingivitis, dental caries, periodontitis, pericoronitis, pulpitis, root canal disinfection, flatness lichen in oral cavity and diseases of oral mucosa. KJZ LASERINSTRUMENT FOR ORAL CAVITY emits laser with wavelength of 1064nm, which can moderately run through human body and produce the right heat. By means of this type of laser with small energy the blood capillary in oral cavity can effectively be sealed off. The laser can also resolve and vary the protein of bacteria, playing a role of detumescence, hemostasis and bactericidal action. It can also kill some nerve cells in teeth, playing a role of desensitization. 1. Dentin hypersensitive-ness The sensitive tooth surfacef+s dentinal tubule is open, the Nd:YAG laser instantaneous produces The high thermal effect causing the organic matter denaturation and inorganic substance fusing on the dentin surface, forming a glass type matter, sealing up dentinal tubule after the instantaneous coagulation, thus achieved the treatment goal. Prompt supplement inorganic substance when the dentinal tubule fusing, it can better seal up the dentinal tubule and change dentin ultramicro surface texture, at the moment the laser illumination may strengthen desensitization forward effect, reduces dentinal tubulef+s reopening opportunity because of friction or etching. 2. Periodontitis The laser can evaporate and vaporizate coat by illuminating hard organizationf+s surface to be clean. Not only can reduce the quantity of actinomycete, the gum bacillus, and so on, moreover can remove the inflammation granulation tissue at the bottom of the periodontal pocket. First using the laser illumination, then going on gum scaling, the damage is slightly better to the elimination fang stimulator. The Nd:YAG laser illumination canf+t remove the majority of fungi spot, the tooth stone, therefore cannot substitute the traditional gum scaling and fang-level up. 3. Chronic apical periodontitis The hard organization absorbs Nd:YAG laser easily, this enables it to become the first choice of lasers. Chronic apical periodontitis, specially the root tipf+s repeated infection forms the fistula, the root tipf+s surrounded organization and the dental alveoli bone because of infection suffers the destruction, it makes difficult to the treat, often needs to treat many times with the conventional treatment, Nd:YAG laser can reduce the treatment course with the illumination, also the effect is good. 4. Increase roughness on the surface After the Nd:YAG laser illumination, the tooth surface changes unevenly, roughness changes in a big way, enhanced the contacted area between the tooth and the curing agent, therefore the cementing power improves in a big way, so the cementing is more better. 5. Oral ulcer The Nd:YAG laser has good acesodyne effect to the ROU, it can eliminate patient's pain in the short time. Overcoming the traditional medicine partial treatment with the shortcoming which is interfered with the oral cavity environment, it can rapidly stop pain, accelerate the ulcer to heal, no pain in the treatment course, and it does not damage other mucous membrane organization, easily operated and safe. Quantity: 1 si Piece Package Size: 42.0 *52.0 *100.0 ( cm ) Gross weight/Package: 100.0 ( kg )
High speed handpiece tie-in (2 hole or 4 hole) 2 sets low speed handpiece tie-in (2 hole or 4 hole) 1 set three-way syringe(cold and hot) 1 set each all directional headrest 1 set rotary assistant position 1 set square opration lamp 1 set strong and weak suction 1 set each saliva ejectors 1 set each water heating system 1 set 24v x-file viewer 1 set outlay pure water bottle 1 set luxurious ceramic cuspidor 1 set completely seamtess cushion & backrest 1 set each dentist stool 1 piece Technical parameter: 1available color: light blue, grass green, apple green, orange, pink 2options: scaler, curing light, handpiece, oral cameral system 3certificate: CE, EMC, s, ISO13485 4specifications: power supply voltage:ac220v/110v, 50hz/60hz Air sorece pressure:>0.55mpa Water source pressure:0.2mpa-0.4mpa. 1 wooden box/unit 1300mm*1000mm*760mm
Ower voltage:220v -110v 50hz Motor voltage:24v Air pressure:0.2mpa-0.4mpa Water pressure:0.5mpa-0.8mpa. 1.32m*0.97m*1.12m 160kg
High-speed handpiece tubing with connector : 2 set Low-speed handpiece tubing with connector : 1 set 3-way syringe : 2 piece Top-mounted instrument tray: 1 set Water suction and saliva ejector : 1 set each Operation sensor lamp : 1 set X-film vewer (24V) : 1 set Asistant control sytem : 1 set Water purified system : 1 set Water heating system : 1 set Auto water supply and flush cuspidor system :1 set each Turnable ceramic cuspidor: 1 set Multi-function foot pedal: 1 set Dentist stool: 1 piece Lower chair frame. Export wooden case 1540*1100*1400mm.
We take orders the principle of management of¡± the trustworthiness first, science and technology lead, steady development", absorbing international advanced technique and principle actively, use the special management method, integrating company various resources well, developing with all strength with produce the most suitable match the international market need of high-quality product. Our company is passing ISO9001, the system attestation of the quality management of the ISO13485 and CE product attestation now. We have two series of products, which style is diversification, the price is reasonable, the quality is steady and credibie.The quality is a root, therefore, we strictly control every procedure, from the development of product, design, produce, adjusting, examine etc.. In the meantime, we extensively absorb the large customer's suggestion, improve our products continuously, expanding more and more new products. We won the large customer's favor by the best price and reliable quanlity,.Our sales network is continuously more stronger day after day, we have our agents in each big city all over China. Our products also comes successfully into the international market, we sell to Southeast Asia, Middle East, Africa, America etc. nations and regions. Standard export wooden case.
Standard accessories * all controlled by the electric valve * dc motor ; * assistant controlled system by touchpad * automatic thermostatic water supply system * compensate wider dental unit * handpiece tubing with standard fittings * three way springe (one for hot , one for cold) * water suction and saliva ejector (with switch) * powerful suction apparatus * easy cleaning integral and turn able ceramic spittoon * water purified system with bottle of built-in * strong and weak two set operation light * x-film viewer ; paper cup device * spirit lock tight equilibrium device * console model side box with floor junction box * dental stool * suitable for adult and children headrest * three programmable positions * multifunctional foot pedal Weight :240kg
Dental unit 2.5 cubic meter
Dental chairs
Automatic constant temperature water system .à 1set Three way springe .................................................... 2pcs Water snction and saliva ejector ............................ 1set each Round operation light ............................................à 1set 24v low voltage x-film viewer .................................à 1set Turnable ceramic cuspidor ...................................à 1set Water purified system .............................................à 1set luxury dental stool .....à 1set Assistand computer control .................................à 1 set Options 4 holes high speed air turbine hand piece 4 holes low speed air turbine hand piece Endoscope system Ultrasonic scaler Curing light Specifications Power voltage 220v 50hz Motor volage 24v Water pressure 0.2mpa??0.4mpa Air pressure 0.5mpa-0.8mpa 1500cm*1800cm*2200cm 135kg