*More than 10 years manufacturer and supplier experience *Quick delivery of 15 days. *Australian Standard: AS/NZS 2208: 1996-safety glazing matererials *Safety strong packing and loading *Option processing clear, frosted, heat soaked, heat strengthened *Edging: Flat edge, grind edge, polished edge, beveled edge and others. Tempered Glass/Toughened Glass Tempered glass is made by heating float glass to its softening point ( 650-700 C )and then suddenly cooling down to form compression in the surface layer of the glass, thus the mechanical strength is increased by 5 times. Features: 1.5 times harder than ordinary float glass. 2. Tensile strength for float glass 40 MPa (N/mm2), tempered glass, 120-200 MPa (N/mm2) 3. Quality standard AS/NZS 2208: 1996 4. It withstands abrupt temperature change of 220 Centigrade. 5. Once breakage occurs, the glass disintegrates into small cubical fragments, which are relatively harmless to human body. Heat Strengthened Tempered Glass 1. Better flatness than tempered glass 2. Effectively resist the effect of thermal stress, avoid glass thermal explosion 3. Withstand a very wide range of rapid temperature changing with endurance of 200-300 C 4. Cooling rate lower and surface stress smaller than tempered glass Use high quality raw clear glass, visible light transmittance(%) from 4mm-19mm Specification: Flat Tempered Glass MIN 90x90mm, Max 3660x2140mm Thickenss 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm Bent/Curved Tempered Glass Max. Size 2200x750(mm) Min Size 400*300(mm) Thickness 5-19(mm) Min. Benting Radius 370mm Applications: 1. External use of windows, doors, curtain wall, shopfronts, offices, houses, shops etc. 2. Interior glass screens, partitions, balustrades etc. 3. Shop display windows, showcases, display shelves etc. 4. Furniture, table-tops, picture frames etc. Tempered Glass Equipments 1. Water jet machine, cutting tolerance +-0.1mm 2. Screen Printing Equipment 3. Single Straight-line Glass Edging Machine 4. Double Straight-line Glass Edging Machine 5. Round Glass Edging Machine 6. Glass Drilling Machine 7. Glass Tempering Furnace 8. Glass cutting line Packing detail: 1. Interlay paper between two sheets 2. Timber end caps 3. Iron/plastic belt for consolidation 4. Safety corner Density 2.5g/cm Tensile Strength 120-200 MPa (N/mm2) Compressive Strength 1000 N/mm 2 Yong's Module 73 Gpa Coefficient of linear expansion 9 x 10 - 6 m/Mk softening point 650-700C Thickness4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm Payment term (1) 30% deposit ,balance paid against the copy of B/L payment term (2) 30% deposit ,balance will be L/C at sight Delivery time 15 days after received the deposit Packing End caps pakcing within stripe and paper MOQ 1000 Square meter Loading port Qingdao port Australian Standard: AS/NZS 2208:1996-safety glazing matererials
Flat and curved tempered safety glass.Shipping
Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation
Specifications toughened glass 4mm Glaston toughened furnace 4mm clear glass facade Export to over 20 countries CCC,meet EN/BS/NZS/ANSI Widely used for windows & doors, shower room, balustrade, pool fencing, skylight, furniture desktop, partition, solar panel, curtain wall, greenhouses, etc. Tempered/toughened glass is made from annealed glass via a thermal tempering process in which the glass is heated till its softening point about 650 degrees and then quenching quickly to become Tempered glass or heat strengthened glass Characteristics A fully Tempered glass is 3 to 5 times stronger than annealed glass of similar thickness. A fully Tempered glass is regarded as a safety glass and when it breaks it disintegrates into small blunt pieces/ small oval-shaped pebbles which greatly reduce the chances of injuries 1) Strength - Fully low-e Tempered glass is generally 3 to 5 times stronger than annealed glass and twice as strong as heat strengthened glass of similar thickness, size and type. For fully Tempered glass the minimum surface compression is 10000 psi and for a heat strengthened glass is 4000-7000 psi for 6 mm glass. 2) Safety - When broken by impact, fully Tempered glass immediately disintegrates into small oval-shaped pebbles, thus greatly reducing the likelihood of cutting person Properties of Tempered glass Data Density (Approximate) 2.42-2.52 g/cm Tensile Strength 120 to 200 N/sq.mm Compressive Strength 1000 N/mm2 Modulus of Elasticity 70Gpa Coefficient of linear expansion 9 x 10-6 m/Mk U Value 5.7W/m2C for 6mm Tempered glass SF for 6 mm clear 81 % SC of 6 mm clear 0.93 Selectivity 1.0 VLT of 6 mm tempered glass 87% Clear Tempered glass thickness: 3mm, 3.2mm, 4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm Color: Clear, Ultra clear Tinted, Grey, green, bronze, blue etc. Reflective & low-e (including double silver low-e) etc. Main Products we process: a. Flat tempered/toughened glass b. Curved tempered/toughened glass c. Insulated glass d. Tempered/toughened insulated glass e. Laminated insulated glass f. Tempered low-e insulated glass g, Double silver low-e insulated glass h, low-e insulated glass with TGI spacer i. Silk screen printing glass j. Frosted glass/land blasted glass, acid etched glass k. Hot bent glass
Tempered glass, flat tempered glass, art glass, curved tempered glass, irregular tempered glass, fire resistant glass.
Monolithic tempered glass, insulated glass, laminated glass, laminated insulated glass. curved tempered glass and so on ..
Toughened glass is a safety glass that has undergone processes of controlled thermal treatment to increase its strength. Also known as 'Tempered glass', toughened glass is made from annealed glass that has been heated to approximately 650â?°C and then rapidly cooled, making it four times stronger than ordinary glass. Due to the increased heat treatment and rapid cooling of the glass, the treatment produces different physical properties. This results in compressive stress on the surface and improved bending strength of the glass. Before toughening, the glass must be cut to the correct size or pressed to shape. The Process of Toughening The glass is carried by rollers and goes through the furnace. Three types of modes are used to heat the glass - conduction, convection, and radiation. While the rollers help to conduct the heat, the coils enable radiation of heat. This ensures that the glass is evenly heated on every side. By blasting air on both the surfaces, the heated glass is then cooled uniformly.
Glorious Future Glass has been dedicated to production and sale of the building safety glass for architecture and residences area, including Low- e glass, insulated glass, coated glass, laminated glass, tempered glass, silk- screen glass, flat- bending and tempering glass, fire- resitant glass, heat soaked glass, locomotive glass, half- mirror, anti- slip glass, shower door glass, pool fencing glass, balustrading glass, skylight glass etc. Product Information Basic Information Product Name Toughened Glass / Tempered Glass Thickness Customized Size Customized Type Large or normal size glass panel Color Customized Packing Safety Sea - worthy Wooden or Plywood packing Delivery Time Shipped within 15 days after receive deposit Payment Term T/T, Western Union, etc Shipping Sea, Air, Express Certification CCC, ISO9001, EN, AS/NZS2208, SGCC, IGCC Application Doors and Windows, Bathroom, Indoor Partition, Daylighting Ceiling, Furniture Glass, Guardrail Glass, Fence Glass Characteristics of Toughened/Tempered Glass Toughened glass compared with equal to the height of float glass, high resistance to bending and impact resistance strength of 4-5 times Not easily broken when we choose, the glass broken into smaller particles obtuse Angle after fragments, won't cause harm to human body Safety glass, which are widely used in mechanical strength and higher security requirements, such as glass door, curtain wall, indoor partition, elevator, showcase, building primary side window, furniture appliances, etc Security, impact strength and thermal stability as well as flat tempered glass, its high wind pressure strength and immunity performance than tempered glass, safety glass Properties of Toughened/Tempered Glass Properties Toughened/Tempered Glass Thermal Shock Resistance Up to 250�°C Mechanical Strength Four to five times stronger than annealed glass Tensile Strength 65 MPa Bending Strength 120 - 200 N/mm2 Surface Compression > 95 MPa Design Stress for Architectural Purposes 50 MPa Fragmentation Small round crystals Conducive for Processing Cannot be cut after Toughening
Tempered Glass also called toughened glass is a heat toughened safety glass.It has undergone a special heat treatment increase its strength and resistance to impact.In fact,tempereded glass is approximately four times more resistant than normal glass. Rongke Tempered Glass is made by "landglass"toughening furnace which is famous of producing high quality glass.Meanwhile,we can arrange to processed as your order. Rongke Tempered Glass could goes back to all the time to 20 years ago when china was building it's infrastructure.From then on Rongke Tempered Glass was widely used in various domestic building. PRODUCT NAME Tempered Glass TECHNOLOGY Toughened FUCTION Sound proof, Heat controll, High strengh, Safety glass EDGE Polished or Customized COLOR * Clear Glass * Blue (Dark Blue, Ford Blue, etc.) * Green (Emerald Green, F Green, etc.) * Tinted ( Gold Tinted, Euro Bronze. etc.) * Grey ( Light Grey, Silver Grey, Dark Grey, etc.) * Champagne * Multiple Color options THICKNESS 3mm-12mm or customized NORMAL SIZE 914x1220mm,1524x 2134mm, 1220 x 1830mm, 1830 x 2440mm, 2140/2250/2440x 3300/3660mm or customized. APPLICATION * Architectural Facades * Automobile Industries * Safety Glass * Partitions, Shop Fronts, Show Cases * Residential Printed Glass * Silk-screen Printed Glass * Table Tops, Shelves, Consoles, Folding Screens DELIVERY 7-15 days after receive your deposit FEATURE Once breakage occurs,the glass disintegrates into small cubical fragments,which are relatively harmless to human body PACKING * Interlayers paper between two sheet * Fastening with plastic belts. * Wrapping with film. * Packing with fumigation wooden or plywood crate. * Fastening the wooden crate with metal belts. SAMPLES Free samples PAYMENT T/T,L/C
Tempered glass Tempered glass , pattern glass , shower room Shower Glass And Door Wooden crate
Tempered glass is produced by heating float glass to its softening point and then suddenly cools down to form compression in the surface layer, which make toughened glass has surface pressure stress over 90Mpa and heat-strengthened glass has surface pressure stress 24-69MPa Application: widely used in the area which has a high standard for mechnical strength and safety. doors,building wall,facade window, greenhouse Main specs: Max size(mm):2440 x 6000 Min size(mm):300 x 300 Thickness(mm):3-19 wooden case
Flat Tempered Glass: Max 3300*15000mm;Min 85*245mm Bent Tempered Glass: Max 3660*2440mm,Min 600*400mm Min Curvature of Bent Tempered Glass: 1200mm Thickness: 4-19mm Glass Type: Clear,Tint,Patterned,AcidEtched,Ceramic Frit/Silk Screen, Laminated Process: Complete tempered; Heat Strengthened; Heat Soaked, Grind edgework, Polished Edgework/Louvre,Hole, Cutouts Productivity: 1.8 million m2/year PLYWOOD END CAP/CRATE,METAL END CAP,PAPER BOX,A FRAME
Tempered glass Thickness:2-19mm Size:55*55(min), 3000*6400(max) Wood crate and carton
Tempered glass 1)Thickness: 3-19mm 2)Color:clear or color 3)Size: as your request 4)edgework: rough grinding,accurate grinding,flat and arris,pencil and C,etc 5)Package: seaworthy strong crates,with paper or powder as interlayer between each two peices of glass. 6)Application:widely applied in window and door, facades and curtain walls, automobile , train, vessel, furniture and decoration. 1.Security. Tempered glass is safety glass, for it will split into obtuse fragments, which has no threaten to humans 2.High intensity. The intensity of tempered glass is 4 times than normal glass 3.Thermal stability. The temperature range our glass can bear reaches 200 degree celsius 4.Good flatness. Our company brings in worldwide top two sections of glass tempering furnace, keeping the appearance of glass curtain wall smoother 5.Holes availlable at customers option. Package: seaworthy strong crates,with paper or powder as interlayer between each two peices of glass.
Products specification of tempered glass: The thickness: 3mm-22 mm Size: any size(or as your request) Tempered glass: With good inflexible and heat resistant, it is up 3-6 times than a standard glass, and the press is more than 95 MPA; With good heat reliability, it can endure the temperature from 200-30000C, and for the standard one, it only can be 70-10000C. Safety, When broken, it only can be as small granules and will reduce the damage to personal and property to lowest. Goods are packed in standard export wooden box.
Tempered glass is made by heating flat glass to approach its softening temperature and suddenly chilling it with jets of cold air, which produces highly desirable conditions of induced which result in additional strength,resitance to thermal stress and impact resistance. Feature: 1. High intensity .tempered glass is 3-5 times stronger than ordinary annealed glass 2.Good safety function .In the event of breakage, tempered glass breaks into blunt particles causing practically no injury to the person 3. Withstand rapid temperature change .tempered glass can withstand a very wide range of rapid temperature change. Thickness:2-12mm Specification: Min:200x200mm Max:2440x3660mm Application: Construction, automobile, train, ship, furniture, automatic door escalator, microwave oven, refrigerator, shower etc. Standard wooden crates.
1,Thickness:3-19mm 2,Max:5000X3300mm Min:600*900mm 3,SGCC,CE,ISO 4,Edge:Flat,grind,polished 5,Holes available. Specification a)Max size:5000X3300mm b)Thickness from 3mm-19mm c)Color:clear,low-iron,F green,ocean blue,Fort blue,and other tinted glass. d)Edge:Flat edge,grind edge,fine polished edge,bevelled edge and others. e)Corner:natural corner,grind corner,round corner with fine polished. f)Holes:Drill work available at customer's option. Quality Standard toughened glass with SGCC,CE certificate,AS/NZS certificate,3C certificate and Fire-proof certificate. Applications Building glass,Curtain wall, Air conditioned Buildings,Hotel,Furniture, Showcase,Sightseeing elevator,Bus station,Subway station, bank, airport,etc. Crate with paper and powder interlayer
Tempered glass Thickness:3-19mm Max Size:3000*11000mm.
1). Tempered glass is high grade float glass which is processed by special methods. 2). Have a high impact strength and great intensity to improve 3). If broken, the particles and debris will not harm the human body is an ideal choice for safety glass. 4). Can be used in flat-type building and around the doors and windows, walls, screens and home decoration, shower room , and so on . Paper interlayer between two sheets, wooden crates with strong bottom plank and polythene wrapping on crates to avoid moisture.
Description: 1). Tempered glass 2). Shape: can be round or rectangular 3). Size: as your requirements 4). Can do some designs on it Paper interlayer between two sheets, wooden crates with strong bottom plank and polythene wrapping on crates to avoid moisture.
