Reinforcing rebar coupler Materials: 45# carbon steel Size: d12mm-40mm Use: reinforced bar connection Bestest quality Nylon bags & wooden pallets. At the same time, goods could be packed according to your requirements.
Spectral performance: Side 1 Partial reflectance values as indicated Tolerances on reflectance 50-70% ±3.0% 75-85% ±2.0% 90-95% ±1.5% Side 2 Standard high-efficiency low loss anti-reflectance thin film coating applied to this side only Reflectance per surface 10.6|¡§m for normal incidence <0.20% Transmission: > 99.0% --> Model numberdiameterthickness% reflectance Ocz-0512-50.500"0.120"50% Ocz-0512-70.500"0.120"70% Ocz-0512-75.500"0.120"75% Ocz-0512-80.500"0.120"80% Ocz-0512-85.500"0.120"85% Ocz-0512-90.500"0.120"90% Ocz-0512-95.500"0.120"95% Ocz-0712-50.750"0.120"50% Ocz-0712-70.750"0.120"70% Ocz-0712-75.750"0.120"75% Ocz-0712-80.750"0.120"80% Ocz-0712-85.750"0.120"85% Ocz-0712-90.750"0.120"90% Ocz-0712-95.750"0.120"85% Ocz-1012-501.000"0.120"50% Ocz-1012-701.000"0.120"70% Ocz-1012-751.000"0.120"75% Ocz-1012-801.000"0.120"80% Ocz-1012-851.000"0.120"85% Ocz-1012-901.000"0.120"90% Ocz-1012-951.000"0.120"95% Ocz-1512-501.500"0.120"50% Ocz-1512-701.500"0.120"70% Ocz-1512-751.500"0.120"75% Ocz-1512-801.500"0.120"80% Ocz-1512-851.500"0.120"85% Ocz-1512-901.500"0.120"90% Ocz-1512-951.500"0.120"95% Ocz-2020-502.000"0.200"50% Ocz-2020-702.000"0.200"70% Ocz-2020-752.000"0.200"75% Ocz-2020-802.000"0.200"80% Ocz-2020-852.000"0.200"85% Ocz-2020-902.000"0.200"90% Ocz-2020-952.000"0.200"95% Plastic box
Feature products Rebar coupler is used to connect the two rebar ends in the construction work. Product description Rebar coupler is used to connect the two rebar ends in the construction work. 1. Easy operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 16mm to 40mm. 3. Use no.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part Rebar coupler: 1. Rebar coupler type:paralleled type, left hand type, right hand type, right and left hand type and reducing type. 2.Range of application:suitable for rebar of hrb335 and hrb400.Diameter from14mm to 50mm. 3.Connection method:mechanical splicing.Can connect same diameter and different diameter of rebar. Product description Rebar coupler is used to connect the two rebarends in the construction work. 1. Easy operation, saving time and rebarmaterial. The rebar coupler producing and rebar end threading will not beaffected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 16mm to 40mm. 3. Use no.45 steel, with the thickness andlength of the rebar coupler, the connecting part has higher tensile strengththan the rebar part Fit for shipping
Uk couplers, germany couplers, USA couplers. Bags on pallet
Scaffoldings couplers Packing in hdpe bags, 25 each
Scaffolding couplers. 25 Pieces per HDPE Bags.
Rebar coupler features: 1. Our coupler adopts 45c of high quality 2. Splice rebars with dia from 14mm to 40mm in construction. 3. Tensile strength can reach 110% of parent rebar. Provides full load transfer with slimmest and shortest coupers, . 4. Quick and easy to install 5. Kinds: coupler with parallel thread. Coupler with upsetting end. Coupler with taper thread. 6. Types: standard type. Left-handed and right handed type. Reducing type. Application 1. Standard type coupler is designed to splice rebars with same dia. 2. Left-handed&right-handed coupler is designed to splice rebars, which are fixed. 3. Transition coupler is designed to splice rebars with different diameters. Technical specification: 1.Type:14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 32mm, 36mm, 40mm 2.Thread angle:75º/60º 3.Length:we have standard length for each type, but we can also make different legnths according to customer's specific inquires 4.Thread pitch:2.5mm, 3.0mm, 3.5mm. Usually packed in woven bag or carton, customer's specifice requirement can also be available.
Mingzhu company's electrofusion fittings adopt international advanced techniques Adopting special purpose material for PE pressure pipeline Special mould design guarantee the precision and stability for the pipefitting size Adopting the auto-coiling tech to guarantee the heating wire's average tension force, to reach stable quality and get the fine welding effect. Concealing the heating wire can improve the fittings' resistance for external force shock greatly. And avoid the short circuit due to extruding by the heated PE material flow. The welding effect can be observed by the observation hole The bar code includes the optimum parameters and provides the convenient welding method. Dn(mm):32,40,50,63,75,90,110,125,140,160,180,200, 225,250,315
04. Pressed double coupler (fixed clamp/fixed coupler), bs 1139 standard / en 74 05. Pressed swivel coupler (swivel clamp/swivel coupler) bs 1139 standard / en 74 06. Pressed putlog coupler, bs 1139 standard / en 74 07. Drop forged fixed girder coupler, bs 1139 standard / en 74 08. Drop forged swivel girder coupler, bs 1139 standard / en 74 09. Sleeve coupler, bs 1139 standard / en 74 10. Base plate, size 150 x 150 mm 11. Metal plank dengan ukuran panjang 2 sampai 4 meter, lebar 25 cm, tinggi 4 cm, tebal 1, 2 mm, ss 280 standard 12. Drop forged double coupler, bs 1139 standard / en 74 13. Drop forged swivel coupler, bs 1139 standard / en 74 14. Inner joint pin 15. Stair thread coupler 16. Putlog head 17. Oyster coupler 18. Board retaining coupler 19. Ladder clamp 20. Roofing coupler 21. Toe end clip 22. Supa tie coupler ii 23. Locking pin 24. Fencing coupler 25. C-clamp fixed coupler 26. C-clamp swivel couple Steel pallets
BS1139 / EN74 standard tubes and couplers for scaffold 1. Tube diameter: 48.3mm; thickness: 4mm; length: per clients requirement; 2. Coupler Fixed, swivel 3. Base plate 4. Hollow and solid jacks 5. Joint pin 6. Steel Plank 7. Steel Ladder
High quality scaffolding couplers. Drop forged. Malliable. Packed as per requirement. Standard packing : gunny bags with 20 pcs each. Special packing : corogated box for each coupler
Right angle scaffolding coupler, drop forged, malliable, high quality. Packing as per requirement. Standard packing : bags with 20 pcs each. Special packing : corogated box for each coupler.
Scaffolding coupler Iso9001;2000 uk en74
Use:apply to HRB335, HRB400 reinforced the connection. Specifications:D14mm-40mm. Materials: 45 # high-quality carbon structural steel.
Rebar coupler is used to connect the two rebar ends in the construction work. 1. Easy Operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 14mm to 40mm. 3. Use No.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part. Packed with bag or carton, according to customers' requirement.
Available in 3ply or 4ply thickness or any other thickness that you need. It is available in different colours, mainly blue, black, green, orange, red, purple & yellow, however we can try to change the colour to follow your specification. There are several basic shapes that we can offer such as: Straight Couplers Straight Couplers with Hump Reducer or Adaptor Couplers 45 degrees Elbow Couplers 90 degrees Elbow Couplers 135 degrees elbow couplers 45 degrees Elbow Reducer Couplers 90 degrees Elbow Reducer Couplers 135 degrees Elbow Reducer Couplers Negotiable
Directional coupler Telephone accessory
Rebar couplers are used in reinforced concrete structures to replace normal rebar lap joints. Each rebar coupler consists of a piece of rebar equipped with a thread and coupler sleeve at the right end as viewed in the direction of installation. ...
3/8" high flow couplers, Max. working pressure: 700 bar, these couplers are the standard parts of most hydraulic cylinders (jacks) and other tools. 1/4" ultra-pressure quick couplers, Max. working pressure: 1500 bar. It can be used for hydraulic torque wrench.
Complete Specification M16-M40,customized can be M12-M50 Special Craft CNPOW Weldable Coupler use annealed raw material and has high quality, good toughness. It also has pass the tensile test and it will not appear the phenomenon of twisting and breaking in the use process, which guarantees the high requirements and high standards of engineering construction. High Quality Steel CNPOW Weldable Coupler use high quality alloy steel such as 20Cr;Great advantage of reasonable design, advanced technology, high precision, reliable connection quality, good comprehensive mechanical properties, good low temperature performance, good plasticity and weldability make CNPOW Weldable Coupler widely applied in medium and low pressure vessels, oil tanks, vehicles, cranes, mining machinery, power stations, bridges as structures subjected to dynamic loads, mechanical parts, building structures, general metal structures. Besides,it can be applied under hot rolling or normalizing as well as the various structures in cold areas below - 40 .
