clear, blue, green and mixed light blue and clear colors HOT Washed PET Bottle Flakes Scrap available
K Nat White Body Wash Available Variants Aloe vera, Cotton Fl, Magnolia, Jeju Lemon. Packing Pouch 12x250ml, 48x60ml, 12x500ml, and Bottle 6x500ml. Product is Manufactured by PT Lion Wings.
Kodomo Shampo and Body Wash Available Orange Gel, Strawberry Gel, Blueberry, and Chery. Packing Bottle 72x45ml, 36x100ml, 24x200ml. Product is Manufactured by PT Lion Wings.
Nuvo Body Wash Available Variants Active Clean, Active Cool, Total Protect, Mild Protect, Nature Protect, Fresh Protect, Care Protect. Packing Pouch 48x60ml, 12x250ml, 12x450ml, 12x900ml, and bottle 6x600ml, 12x250ml. Product is Manufactured by PT Lion Wings.
Giv Body Wash Available variants Bengkoang (jicama), Mulberry, Lemon (lemons), Sakura (cherry blossom), Ungu (purple), Pink, Putih (white), Tin & Zaitun, Saffron. Packing pouch 12x250ml, 12x450ml, 12x900ml and bottle 6x600ml. Product is Manufactured by PT Lion Wings.
Zen Body Wash. Available in 3 Variants : Japanese Red Shiso & Sandalwood, Japanese Red Shiso & Sea Salt, Japanese Red Shiso & Sulphur. Packaging in Bottle 500ml and Refill 450ml. Product is Manufactured by PT Bina Karya Indonesia.
Dettol Anti Bacterial Body Wash Available in : 1. Dettol 100 ml Bottle : Ori, FRS, SNS, SKC, Cool 2. Dettol 100 ml Refill : Ori, Skc 3. Dettol 250 ml Pouch: Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 4. Dettol 300 ml Bottle : Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 5. Dettol 450 ml Pouch: Rad, ORI, FRS, SNS, SKC, ENE, COOL, Deep Clean 6. Dettol 625 ml Pump : Ori, FRS, SNS, Cool 7. Dettol Pouch 600 ml : Cool, Lasting Shipping from Semarang, Indonesia
Dettol Body Wash. Available Variants Bottle: Original Pine Fragrance, Cool Menthol Sensation, Fresh Orange Fragrance Sensation, Lasting Fresh Orange Fragrance Sensation, Skin Care with Extra Moisturizer, Re-Energize Orange Fragrance Sensation, Sensitive with Glycerine. Packing size 24x100gr, 12x300gr. Bottle Pump: Original Pine Fragrance, Cool Menthol Sensation, Fresh Orange Fragrance Sensation, Aloe & Alvocado Contains Glycerin, Onzen Honey with Hichimitsu & Sea Butter Fragrance, Tropical Splash with Citrus &Lemon Honey Fragrance. Packing size 12x625ml, 12x950ml, 24x410ml. Variants Refill/Pouch: Original Pine Fragrance, Cool Menthol Sensation, Lasting Fresh Orange Fragrance Sensation, Skincare with Extra Moisturizer, Sensitive with Glycerine, Re-Energize Orange Fragrance Sensation, Fresh Natural Apricot Granules, Aloe & Avocado Contains Glycerin, Onzen Honey with Hichimitsu & Sea Butter Fragrance, Onzen Peach with Peach & Raspberry Fragrance, Invigorate Sea Minerals Content. packing size 24x250ml, 24x410ml. Product is Manufactured by PT Reckitt Benckiser Indonesia.
Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Material: Water hyacinth, iron, handcrafted-slight variation in color and shape Advantage: - Help stimulates foot reflexology. - Prevention of low numbness, cracked bottle heels. - Create comfortable relaxation for your feet Size: Many sizes as required Feature: Durable, Eco-friendly, 100% natural material, super light, comfortable, airy smell-resistant, disposable Packing: Carton, pallet, big bag, strap or customized
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
Belt press juicing machine for fruit vegetable Use for : 01.fruit juice 02.vegetable dehydration or juce 03.enzyme juice 04.Extraction of medicinal juice 1. High lift and large flow, strong pumping force, not easy to block, precision casting pump body, lasting work, high efficiency and energy saving, after-sales guarantee 2. Long service life. The product is equipped with a new automatic deviation correction and tension system, automatic operation, uniform distribution of materials, extended filter bag life, and long bearing service life 3. Rust-proof and corrosion-resistant, tough shell, stable operation, unique oblique lengthened wedge design, more stable operation and low noise 4. The treatment effect is good. Two sets of independent backwashing systems are adopted. The multi-roll diameter decreasing backlogs are compact in layout and the filter cake has high solid content. 5. Efficient, convenient and ultra-long gravity dewatering area, with large bearing capacity, strong processing capacity, low power consumption and low operating cost 6. Juice yield 85% Small capacity 500-3000kg/h,filter belt width 500-2000mm,power 1.5-3kw, filter belt speed 1.5-3.5m Big capacity 3-20T/hour,power 14.7-41kw ,machine size length 3100-5420mm Width 1475-3430mm high 1820-2420mm
Pharma Bottles Type - Nutrifil/Amber/Heamup/Rectangular/Brut/G-7/G-42/Asava/Mark Cadila/GMS Size - 8/10/18/20/30/32/60/70/100/114/130/150/200/210/485/520/680 ML Origin - India MOQ - 1 Forty Ft HQ Container Chemical Parameters - Hydrolytic Resistance Conform To USP Type III As Per US Pharmacopeia
Glass Bottles Type - Balm/Spice/Marasca/Oil/Flint/Rio/Juice/Beer/RTD/Squash/Lug/Capsico/Ketchup Size - 18/40/60/100/160/200/250/500/750/1000ML Origin - India MOQ - 1 Forty Ft HQ Container Chemical Parameters - Hydrolytic Resistance Conform To USP Type III As Per US Pharmacopeia
We are making very gentle, rose color sweet Frangrance hand wash & Body wash for daily use in home or offices. We make 500 ml bottle with dispenser pump 28/410 and in packing 24 pcs per carton. We can ship it across the world. Pl contact us for detailed information.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
