APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
FFA ( As Oleic) : 3%max. Moisture/Impurities: 0.5% max. Refraction Index: 1.4719-1.4740 @ 25 Degree C. Iodine Index: 120-144. Saponification Number: 187/192. Non Saponification matter: 1.0% max. Soluble in petroleter: 0.1% max. Sediment: 0.3% max. Flash point: 121 Degree C min. Peroxide: 2.0 MEQ 02/KG. lovibond color:(133.4mm). yellow:30-15. Red:3.0-1.5. Smoking Point:215-217. Aflatoxinbi:5ug/kg. Carbonylmeq/kg:10. Heat test:No educts. packing : 1L,2L,3L,5L PET Liter Bottles, Jerry Cans of 10-25 Liter plastic and Tin Containers, we also packing in Flexi Tanks and Liter Drums
Condition: Used Manufacturer: John Deere Alternative Part Number: DZ122646 Special Handling / Truck Freight: Yes Parts Application: Tractor Parts Component: Engine - Diesel Special Notes: MARKED DZ122646 W/TLS Base Part Number: R573055.A
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
US$ 0.385 - 1.85 / Piece 10000 Pieces Minimum Order 3 - 30 days Lead Time Product Details Model Number : S M L----#2074 Brand Name : WinHealth Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: Blue disposable factory waterproof cpe plastic apron/ isolation gown Our PE Apron/ Gowns provide an effective, low-cost garment solution that protects against dry particulates such as dirt and dust in the workplace. They are lightweight, breathable, comfortable and can be used in a variety of setting such as hospitals, food processing plants and general industrial applications. * Raw material: 100% Virgin material. It can be made of HDPE, LDPE, and CPE * With thumb holes and sleeves * Multi-color for clients to choose * Other related products: Disposable Aprons, Disposable Gloves, Caps. Shipping Information: FOB Port: China (Mainland) Lead Time : 3 - 30 days Dimensions per Unit : 120 X 80 X 35 Centimeters Weight per Unit : 15 Grams Units per Export Carton : 50 Export Carton Dimensions L/W/H : 585 X 450 X 420 Centimeters Export Carton Weight : 11 Kilograms Main Export Markets: Asia Australasia Central/South America Eastern Europe Mid East/Africa North America Western Europe Payment Details: Payment Method : Telegraphic Transfer (TT,T/T) Primary Competitive Advantages: Brand-name Parts Origin Distributorships Offered Experienced Staff International Approvals Packaging Price Product Features Product Performance Prompt Delivery Quality Approvals Reputation Service Small Orders Accepted Quickly Delivery High Quality Globally Delivery
Face Shield New US$ 0.295 - 0.985 / Piece 50000 Pieces Minimum Order 3 - 15 days Lead Time Product Details Model Number : WinHealth Face Shields-#9046 Brand Name : WinHealth Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: Description Double Side Anti-Fog, Anti-Static, Optically Clear And No-Glare Lens; Hypoallergenic Foam Band Can Absorb Sweat And Provide Enough Foam Design For Increased Air Flow And Comfort; Sonically Welded Strap Gives The Face Shield Added Strengh And Reliability; Light Weight And Comfortable To Wear; Excellent Protection Against Potential Contamination From Blood Pathogens, Body Fluids Or Harmful Chemical Splash. Shipping Information: FOB Port: China (Mainland) Lead Time : 3 - 15 days Dimensions per Unit : 230 X 180 X 85 Centimeters Weight per Unit: 25 Grams Units per Export Carton : 50 Export Carton Dimensions L/W/H: 450 X 355 X 280 Centimeters Export Carton Weight : 5 Kilograms Main Export Markets: Australasia Central/South America Eastern Europe Mid East/Africa North America Western Europe Asia Payment Details: Payment Method : Telegraphic Transfer (TT,T/T) Primary Competitive Advantages: Brand-name Parts Origin Experienced Staff Green Product Guarantee/Warranty International Approvals Packaging Price Product Features Product Performance Prompt Delivery Quality Approvals Reputation Service Globally Delivery Quickly Delivery High Quality
Red chilli is the main spice in the spice world, we KAPADIYA EXPO COMPANY produce all varieties of chilli powder & flakes as per customer need, we have chilli powder & flakes it is one of leading in flavour, fragrance and delicious dish, Our All spice is selected from premium quality to get for optimum taste. We use the most premium quality spices to make our Ground spices and masala. We KAPADIYA EXPO COMPANY are one of the renowned as Red Chilli Supplier from India. We are actively engaged in manufacturing, exporting, and supplying of chillies. The available varieties include Chilli Powder, S17Chillies / Teja Chillies, S4Chillies, S12Chillies, Bhut Jolokia Chillies, Bird Eye Chillies, Ressam Patto Chillies, Bholar Chillies, Byadgi Chillies, and others, which can be made available in different packaging weight choices as demanded by the customers. Red Chilli is a daily requirement in every household. Chilli Powder is produced from the best chillies procured from across the globe and then processed in powder form. We can provide you chillies with steam and steam less, also we can do Flakes and Powder as per customer need. Our chilli with steam and steam less is the topmost selected product worldwide, our chillies are very hot and spicy with customer demand packing and quality. Red Chilli offered are made available by us in different varieties and can be used in mix with other spices to add to the flavour of the dishes. We also produce customized packing and sterilization processes like ETO, Gamma, and Steam sterilization, we make customized labelling and OEM packing for his ready to resale. Health Benefits of Chillies Chilli are a popular spice in many parts of the world and well known for their hot, pungent flavor. Chilli are a rich source of spicy-hot capsaicin. They are also packed with nutrients and have many health benefits. Chilli have numbers of health benefits. Chillies are one of the health-benefiting spice items concentrated with minerals, vitamins, and certain Phyto-nutrients. Chilli contains the health-beneficial alkaloid compound capsaicin, which gives a strong spicy pungent character. capsaicin has anti-bacterial, anti-carcinogenic, analgesic, and anti-diabetic properties.
Engine Coolant Expansion Tank For " Porsche " Part Number : 97010615103
Left Fuel Tank Pump For " Mercedes Benz " Part Number : A2184700594
Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world. Part: WHOLE Storage Type: cold place Specification: LOBSTERS Instruction for use: Food Shelf Life: 2 year Variety: LOBSTERS Type: Lobster Style: Fresh Size (cm): 7.5 Weight (kg): 5 Model Number: LOBSTERS Brand Name: Custom Product Name: LOBSTERS Quality:High Quality
Warmest greeting to HUVY IMPORT EXPORT CO.,LTD We are one of the leading companies that supplying dried food, frozen food, fruit and spices,..to many countries in the world. Part: WHOLE Storage Type: cold place Specification: LOBSTERS Instruction for use: Food Shelf Life: 2 year Variety: LOBSTERS Type: Lobster Style: Fresh Size (cm): 7.5 Weight (kg): 5 Model Number: LOBSTERS Brand Name: Custom Product Name: LOBSTERS Quality:High Quality
High quality Frozen anchovy fish from wala seafood company - Drying Process: VF -Packaging: Vacuum Pack, Bulk, Box, Bag - Shape: Piece - Shelf Life: 24 month - Model Number: Anchovy - Variety :. Key Anchovies - Weight (kg) : 10 - Additives: n/a - Freezing Process: BQF - Max. Moisture (%): 20 - Part: WHOLE - PH Value: 5 - Preservation Process Water - Size (cm): 5-7 - Glaze: 0-20%
- Product name: Frozen Tilapia Fish - Feature: Nature - Storage: Frozen Under -18 - Quality: 100% Fresh SPECIFICATION - Shelf life: 2 years - Style: Frozen - Packing: Carton - Model Number: 100-200g, 200-300g, 300-500g, 500-800g, 800g up - Weight (kg) :10 - Freezing Process: IQF - Part: WHOLE - Style: FROZEN - Feature: Organic, NATURE
SPECIFICATION - Shelf life: 2 years - Style: Frozen - Packing: Carton - Model Number: 100-200g, 200-300g, 300-500g, 500-800g, 800g up - Weight (kg) :10 - Freezing Process: IQF - Part: WHOLE - Style: FROZEN - Feature: Organic, NATURE - Product name: Frozen Tilapia Fish - Feature: Nature - Storage: Frozen Under -18 - Quality: 100% Fresh
SPECIFICATION - Shelf life: 2 years - Style: Frozen - Packing: Carton - Model Number: 100-200g, 200-300g, 300-500g, 500-800g, 800g up - Weight (kg) :10 - Freezing Process: IQF - Part: WHOLE - Style: FROZEN - Feature: Organic, NATURE - Product name: Frozen Tilapia Fish - Feature: Nature - Storage: Frozen Under -18 - Quality: 100% Fresh
SPECIFICATION - Shelf life: 2 years - Style: Frozen - Packing: Carton - Model Number: 100-200g, 200-300g, 300-500g, 500-800g, 800g up - Weight (kg) :10 - Freezing Process: IQF - Part: WHOLE - Style: FROZEN - Feature: Organic, NATURE - Product name: Frozen Tilapia Fish - Feature: Nature - Storage: Frozen Under -18 - Quality: 100% Fresh
