Murphy plate finned tube heat exchanger has some obvious advantages in operation, especially in the field of air to air heat transfer, especially in the field of ultra-high temperature air to air heat transfer. To a certain extent, it has become the upgrading product of the tube, heat pipe and finned tube heat exchanger. The main characteristics of Murphy plate finned tube heat exchanger: the finned tube heat exchanger can be designed with elastic structure, which can effectively solve the problem of its thermal expansion; there are rich test and actual operation data as support, through constant correction of the calculation formula, the calculation error is within 5%, and more than 95% of the equipment operation can reach the design parameters.
OD 15.88mm Heat Exchanger Tubing , Copper Finned Tube For Flooded Evaporator 1
Transense Heat Exchanger Tube , 25.4mm Air Conditioner Copper Pipes 1
Shell and tube heat exchanger is a device that transfers part of the heat of hot fluid to cold fluid, also known as heat exchanger. Shell and tube heat exchangers are general-purpose equipment in chemical, petroleum, power, food and many other industrial sectors, and play an important role in production. There are many types of heat exchangers, but according to the principle and method of heat exchange between cold and hot fluids, they can be basically divided into three categories: partition type, hybrid type and regenerative type. Among the three types of heat exchangers, the partition wall heat exchanger is the most widely used. According to the different heat exchange tube bundles, the partition heat exchanger is divided into: FPR floating coil heat exchanger, LWR threaded tube heat exchanger, and WMH eddy current heat film heat exchanger. Advantages of shell and tube heat exchangers: 1. High heat transfer coefficient: threaded pipe is a high-efficiency heat transfer element combining internal and external threads made of red copper or stainless steel with high thermal conductivity. The threaded pipe heat exchanger made of it has little fluid resistance. , then a strong turbulent flow is formed, which greatly improves the heat release coefficient inside and outside the tube. After testing, the total heat transfer coefficient of steam-water heat exchange is 3000~6000W/m2, and the total heat transfer coefficient of water-water heat exchange is 2500~5500W/m2. 2. Compact structure: This product has a large heat transfer area per unit volume. The total heat transfer coefficient is high, so the floor space is greatly reduced, saving materials and space. 3. Not easy to scale: Due to the special concave-convex structure of the threaded pipe, multi-flow layers and rotary scouring are generated inside and outside the pipe. In addition to the thermal expansion and contraction of the pipe, impurities will not remain inside and outside the pipe wall, so it is not easy to scale. , the long-term operation effect is good. 4. Not easy to leak: The sealing circumference of this product is short, the thick thread of the threaded pipe is similar to an expansion joint, and it has its own compensation ability. The thermal stress of the heat exchanger is small, and it is not easy to leak. 5. Easy installation: This series of heat exchangers has two types: horizontal and vertical, which are easy to install in different positions. 6. Compulsory supervisory inspection, reliable quality: manufactured, inspected and accepted in strict accordance with GB150-1998 "Steel Pressure Vessel", GB151-1999 "Shell and Tube Heat Exchanger" and related standards, and accepted "Pressure Vessel Safety Technology Supervision Regulations" supervision.
Precision Equipments is the leading Shell and Tube heat exchanger manufacturer. A shell and tube exchanger consists of a number of tubes inter-connected inside in a cylindrical shell. This shell and tube exchanger heat through the tubes. there are two fluids cab exchange heat from one place to another. One tubes flows over the outside and other one flows through the tubes. Whether it is a liquid or gas can transfer easily. These tubes are aligned in parallel or cross arrangement. we are using Standard Quality raw material to manufacture of our products.
Specialized and Global Supplier of Fully Washed Original Titanium Sheets, Scrap, and Heat Exchangers.
Product detail inside: titanium coil titanium tube material seamless tube titanium tube diameter 12.7mm----30mm(normal use) titanium tube thickness 0.55mm----3.0mm(normal use) outside: PVC case PVC cover material enviromental protection PVC tube diameter OD110mm----OD400mm PVC tube thickness 2.7mm----15.3mm connection gas inlet and outlet titanium thread and copper nut/tube water inlet and outlet plastic piston testing/others water pressure 0.25----1.0Mpa(2.5---10bar) gas pressure 3.5Mpa PVC temperature 45°C shell leakage no tube leakage no pack 0.6mm thick gray sponge corrosive or not anti-corrosion use pool /heat pump/ air conditioner/chillar etc
Customized Bend Extruded Fin Tube,Finned Tube Heat Exchangers,Extruded Finned CS Alloy Serpentine Tube For Boiler Heat Exchanger.
KFXY-045UCII 45kw Titanium heat exchanger swimming pool heat pump 1) PVC Titanium heat exchanger with full resistance against corrosion, more durable. 2) Compact structure, easy demountable for access. 3) High efficiency compressor, saving energy. 4) Flow switch for water flow protection. 5) Intelligent controller and adjustment by quick mind microprocessor. 6) Intelligent LCD display wired controller. 7) Air exchanger (fins-coil )with hydrophilic coating. 8) Automatic defrosting function included. Optional: R410a, R22, R407c refrigerant is available.
Heat Exchanger Tube | Boiler Industry Tube General description: Seamless stainless steel tube for boiler tube and heat exchanger tube is of the large heat exchange area and handling capacity. It can bear high pressure and temperature. It uses argon welding equipment and electro-polishing treatment between shells and tubes. With strict inspection and testing procedures, it is a nice product for the heat exchange of fluid media in industrial production. Product Name ASTM A213 T11 Heat Exchanger Tube Seamless Steel Pipe Boiler Tubing Material 304/L, 316/L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31803, S32205, S32750, S31254, XM-19, TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444,TP439, TP446, etc. Size range OD: 3-813mm WT: 0.05-120mm Standard ASTM A213, A210, A192, A179, A106, A249, etc. Application For manufacture wall panel, heater, boiler, condenser equipment, superheater and steam pipeline of boilers, pipelines and pipeline components
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
Shell types Heat Exchanger are classified into fixed and floating type Heat Exchangers. Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. BEU heat exchanger are shell and tube exchangers with tube bundle consisting of 'U' shaped tubes fixed by mechanical rolling to only one tube sheet. This type of heat exchangers is designed and built with removable shell and tube to allow easy maintenance.
1.Introduction We are, at the same time ,hydraulic press machine manufacturer, we make the mould then press the plates. Our plates are made using single-step pressing. This ensures uniform plate strength and thickness over the entire plate, dramatically reducing the risk of fatigue cracking.The correct material quality can make a huge difference to a process. We ensures that the correct material is specified according to its intended use. Plate materials available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L. More details please contact us directly . 2.Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 3.Our Advantages: a. Competent in suppling various types plates, and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices. c. Large stock: We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification. f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 4. Application, They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
FITZER INCORPORATION, is engage in the field of Design, Manufacturing & Exporting various types of such as, Extruded finned tube, Serrated finned tube, Spiral finned tube, Crimped finned tube, wire wound finned tube, Helical finned tube, welded finned tube, H' type finned tube, Economizer coil, Spiral type Heat exchanger, Finned Tube Heat Exchangers, Oil coolers Fin Fan Coolers Process Gas Cooler, Air Heater, Air Pre Heaters, , Hydraulic oil coolers, Air Cooled Heat Exchangers & various types of Shell & Tube Heat exchangers / Evaporators / Condensers, Industrial Dehumidifiers, Blowers & Evaporative Condenser Other Products: - Block Ice Plant, Tube Ice Plants, Flake Ice Plants. Our brand chooses to stand firm in the Indian & International market with promise, Standard & guarantee. Established by two technocrats vast experience in Stainless Steel Fabrication, Thermal Heat Transfer Systems & Refrigeration HVAC equipment Our team result oriented Qualified Techno-Commercial Staff having spirit of team work, enthusiasm and a passion for excellence to deliver outstanding performance in the field of manufacturing GMP and Non GMP Equipments for Chemical, Pharmaceutical, Paints and Other Process Industries. We design and manufacture as per international standard such as ASME / TEMA Our products can be seen operating in refineries & petrochemical, pharmaceutical, chemical, marine, steel & various process industries.
Tube Bundle Heat Exchangers U Tube bundle Heat Exchangers can duplicate any existing bundle to include dimensions, materials and performance. A heat-exchanger system consisting of a bundle of U tubes hairpin tubes surrounded by a shell outer vessel. One fluid flows through the tubes, and the other fluid flows through the shell, around the tubes. One of the most common applications is the cooling of Hydraulic Fluid. And oil in engines, transmissions and hydraulic power packs. With the right choice of materials they can used to cool or heat other mediums. Such swimming pool water or charge air.
We manufacture Shell & Tube type Heat Exchangers in a wide variety of sizes & materials. We have a complete facility to design (Thermal and Mechanical) and manufactures complete range of Shell and Tube Heat Exchangers for cooling, condensing and heating application. A Shell & Tube Heat Exchanger Consists of a Shell with Traditional plain tubes or enhanced surface tubes for high thermal performance.
FITZER offers inhouse designed and manufactured graphite shell and tube heat exchangers. Graphite shell and tube heat exchanger is used to cool down or heat up ultra-corrosive chemicals. We provide wide range of size in graphite shell and tube heat exchangers with our prime focus on performance and reliability. Our extended and highly customizable heat exchangers portfolio enables us to provide particularly adapted solutions. All our graphite shell and tube heat exchangersâ?? designs are totally modular to best fit with individual process specifications. The diameter, number, and length of tubes, the number of passes on tube side, the type, number, and opening of baffles on the shell side can be set to best meet the velocities, pressure drops, and heat transfer requirements. Customer Benefits : Outstanding Corrosion Resistance â?? Our graphite material is high corrosive resistant at high temperature Multipass construction on process side as well as service side. Robustness Shell and Tube Heat Exchanger are robust in design Easy to install High operational safety Reliability High operational performance with no moving part Low Maintenance Cost â?? Fast and reliable services for repair and spare parts. Sturdy, compact, and modular design Long Lifetime Self-protected metal shell, Premium quality graphite, customized design, no moving part. Product Warranty
(1) the spiral wound tube heat exchanger is highly efficient and saves energy (steam). Internal unique reverse winding spiral coil structure, heat exchange in a current way, make fully condensing steam in the heat exchange tube bundle, do not need a second heat exchange, so it can save a lot of steam; (2) spiral wound tube heat exchanger is stainless steel welding, it can bear high temperature and high pressure. Because the heat exchange tube bundle and shell are all made of stainless steel material, with uniform expansion coefficient, the maximum pressure is1.6 MPa, the highest heat-resistant is 400 â??,it will not cause deformation of the heat exchanger because of pressure and temperature; so there is no need to prepare the equipment to reduce the pressure and temperature. (3) its structure is compact, with small size, saving infrastructure investment; Lightweight and easy to install, the equipment can be connected directly to the pipe, reducing installation cost. (4) the heat exchanger with Michael's (OWEN) turbulent buffeting frequency standard principle, the heat exchange tube bundle adopts the minimum clearance design, effectively eliminates the turbulent chattering phenomenon, prolongs the service life of the heat exchanger. (5) the heat exchanger is low in scale with a low maintenance cost, with unique structure, unique surface treatment technology, and on both sides of the counterflow heat exchange medium, not only improving the integrated heat transfer coefficient but also with self-cleaning function and low scale tend. The method of chemical descaling can be used to clean the heat exchanger, which can save time, power, cost and effect.
Power diameter(mm) PVC shell length(mm) refrigeration inlet and outlet(mm) water inlet and outlet (mm) 1HP 160 350 12.7 50 1.5HP 200 400 12.7 50 2HP 200 400 12.7 50 3HP small 200 420 12.7 50 3HP big 315 400 12.7 19 50 5HP 315 600 12.7 19 50 10HP 400 600 12.7 19 50.
GB.T19447 Heat Exchanger Tube OD 12.7MM For Condenser Washed Surface 1
