Spec as following: Color: white and brown Fiber length: 5-20cm Moisture content: max 15% Impurity content: max 3% Ash content: max 5% Quantity: 1000MT/month Packing:100,120,150 kg bales Country of Origin: India.
Material£º #45 steel wire Tensile strength :> 700mpa Quality Standards: ASTM- A 820/A 820M ¨C 04 Packing: 25kg/bag 20kg/bag. 25kg/bag 20kg/bag.
Material£º Low-carbon steel wire Tensile strength :> 1000mpa Quality Standards: ASTM- A 820/A 820M ¨C 04 Packing: 25kg/bag 20kg/bag Common Specifications type Length£¨mm£© Diameter(mm) L/D Tensile strength (MPA) QR-D-30/30 30 1.0 30 ¡Ý1000 QR-D-40/30 30 0.75 40 ¡Ý1000 QR-D-60/30 30 0.5 60 ¡Ý1000 QR-D-45/35 35 0.75 35 ¡Ý1000 QR-D-65/35 35 0.55 35 ¡Ý1000 QR-D-50/50 50 1.0 50 ¡Ý1000 QR-D-66/60 60 0.9 66 ¡Ý1000 QR-D-80/60 60 0.75 80 ¡Ý1000. 25kg/bag 20kg/bag.
Material: CARBON STEEL Tensile strength :> 800mpa Length: 1 inch Quality Standards: ASTM- A 820/A 820M ¡§C 04 Packing: 25kg/bag. 25kg/bag.
Material : Low-carbon steel wire Tensile strength :> 1000mpa Quality Standards: ASTM- A 820/A 820M ¨C 04 Packing: 25kg/bag Common Specifications type Length£¨mm£© Diameter(mm) L/D Tensile strength (MPA) QR-D-30/30 30 1.0 30 ¡Ý1000 QR-D-40/30 30 0.75 40 ¡Ý1000 QR-D-60/30 30 0.5 60 ¡Ý1000 QR-D-45/35 35 0.75 35 ¡Ý1000 QR-D-65/35 35 0.55 35 ¡Ý1000 QR-D-50/50 50 1.0 50 ¡Ý1000 QR-D-66/60 60 0.9 66 ¡Ý1000 QR-D-80/60 60 0.75 80 ¡Ý1000. 25kg/bag.
Material: CARBON STEEL Tensile strength :> 380mpa Length: 1 inch Quality Standards: ASTM- A 820/A 820M ¡§C 04 Packing: 25kg/bag. 25kg/bag.
Chopped steel wools are used in brake pad and clutch of automobile, motorcycle, locomotive and airplane as raw material with excellent properties of stability, low wear rate and good heat dissipation. So far, no substitute has been found to match its properties. 1. Specification D0-160, D1-80, AD1-80, 1-80, 3L-80, 3-60, Q4-80 2. Packing They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. We also pack the products according to your requirement. 3. Chemical Composition (%) C Si Mn S P 0.07-0.12 0.07MAX 0.8-1.25 0.03MAX 0.03MAX. They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. We also pack the products according to your requirement.
Steel fibe 20kg
Dnz's steel wool floor pad is specially developed polishing and buffing pad. It is used with magnetic chuck. Ití»s ideal helper to remove die-hard surface dirty, paste wax or polish delicate parquet floor. Its strong toughness but soft texture, thick and fluffy structure make them high absorbency and minimum clog-up. Constant work surface allows you high efficiency and thick and fluffy pad absorbs shock of machine, bringing you more comfortable operation than any other floor pads. Exquisite workmanship and accurate process make them unique structure. No juncture, no steel wire or broken-end ensures perfect maintenance to worked surface. Each floor pad is packed and sealed by transparent poly-chloroprene films to ensure quality.
Chopped copper fiber and aluminum fiber Common packaging is compound bag with one layer plastic and two-layer paper, fiber net weight in a bag is 50 lbs or 25kgs. Other weights are available upon request.
As an important family member from dnzí»s metal fibres products, our chopped stell fibres are carefully shaved and exported according to common international standards. Our products are strictly in line with us, european, japanese standards and specifications for automotive friction industry. The performance of chopped steel fibre has proven itself in hundreds of applications. The properties of steady braking, durability, excellent heat-sinking capacity, stable friction factor, low noisy are unavailable in any single alternative material. So they are widely used in brake manufacturing of motorcycles, automobiles, trains and planes. Common basis packing material is compound bag with one layer plastic and two-layer paper bag, 50lbs or 25kgs per bag, with other weights available upon request.
Dnzí»s chopped copper fibre, brass fibre and aluminium fibre are specially developed irregular fibre powder. Lower melting point and hardness, better heat conductivity compared with steel fibre allows them hundreds of application in friction industry to stabilize friction factor and reduce wear. During braking process, heat-sinking capacity is greatly improved since metal softening process absorbs most heat from braking, and the softened metal could infiltrate brake surface squamosely to replace part of burnt binder, this improved braking capacity and prevent metal hot spot. Dnzí»s chopped copper fibre, brass fibre and aluminium fibre are in accordance with common international standards, they are widely used in brake manufacturing of motorcycles, automobiles, trains and planes. Common basis packing material is compound bag with one layer plastic and two-layer paper, net fibre weight in a bag is 50 lbs or 25 kgs, with other weights available upon request.
Stainless steel wool Auto muffler The excellent performance of stainless steel wool in auto muffler has been proven in hundreds of application. The properties of high resilience, unique sound absorption and durability are unavailable in any single alternative material. It is also widely used in other muffle equipments. Filter equipments It is widely used for gas, liquid and melt-liquid filtering. Cleaning It is an ideal cleaner in places like food and glass workshops where rust is forbidden. Reinforcing It could used as reinforcing material in high density concrete or other compositions. 5 lbs per reel, 6 reels per case with other weights available upon request.
Dnzí»s reeled low carbon steel wool is continuously shaved and reeled on a 2í»í» diameter spool. Width of reel is 4í»í» with different weights of 5 lbs, 10 lbs or 15 lbs It is a material for you to invest and develop follow-up high-value products. Ití»s also a product and the first choice for following works: í±sanding, finish and preparation, planning for wood furniture rough, polishing before painting. Convenient to tear and clip for your special application, it is an ideal family cleaner to remove. í±hard dirt in kitchen and toilet, you could use it together with detergents. It is also unique finish and cleaner for garden railings, stone steps and outdoor decorating sculptures. 5 lbs per reel, 6 reels per case. Or 10 lbs and 15 lbs reels, 3 reels per case.
Chopped steel fiber As an important family member from dnzs metal fibres products, our chopped stell fibres are carefully shaved and exported according to common international standards. Our products are strictly in line with us, european, japanese standards and specifications for automotive friction industry. The performance of chopped steel fibre has proven itself in hundreds of applications. The properties of steady braking, durability, excellent heat-sinking capacity, stable friction factor, low noisy are unavailable in any single alternative material. So they are widely used in brake manufacturing of motorcycles, automobiles, trains and planes. Common basis packing material is compound bag with one layer plastic and two-layer paper bag, 50lbs or 25kgs per bag, with other weights available upon request.
Dnz's reeled copper wools (pure copper, brass, bronze) are continuously shaved and reeled on a diameter 2" spool. Width of reel is 4" with different weights of 5 lbs or 10 lbs. As a material, it greatly helps you develop follow-up high-value products. As a product, it regarded as an ideal for private yacht maintenance all along due to its excellent soft texture. Perfect surface polishing for boat body Strong corrosion resistance provides satisfactory protection to yacht Convenient operation, higher efficiency and less scratch than any sandpaper or abrasive material A reliable helper to remove old paint on connecting pieces, sprayed paint, raised wood grains, rough edges and to polish other metal parts Common formats are wound rolls on 2" spool sealed with transparent poly-chloroprene films. 5 lbs per roll, 6 rolls in a case or as per your request.
Hooked ends, Flat ends and Crimped steel fibers: Tensile strength:>1000Mpa or >850Mpa Diameter:1.0mm Length:50mm Diameter:0.75mm Length:30/35mm Diameter:0.5mm Length;30mm 20 or 25kg/bag, 1000 or 1200kg/pallet
Steel fibers Denomination of the product : Strongly carbonaceous steel fibers and filings (resulting from the recycling of tires). Origin of the product : Strongly carbonaceous steel fibers and filings resulting from the recycling of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc.). All the technical features of these tires comply with the regulations and standards requirements of france and of the european union. Composition of the product : The steel is a strongly carbonaceous steel. The small rubber buffings mixed with the steel fibers and filings are made of a mix-in variable proportions of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are : - the sbr (styrene butadiene rubber) - the nbr (nitrile butadiene rubber) [cf. The specifications sheets of the products : 'rubber crumbs' and 'fine rubber powder']. The textile filling and fluff mixed with the steel fibers and filings is made of a mixture of 4 types of fibers : aramide, nylon, polyester and rayon (mainly nylon, that is to say polyamide) [cf. The specifications sheet of the product: textile filling and fluff]. Apparent density ( without compressing) : 238 kg / m3 or 0, 238 [+ or - 5 %] (adimensional). Industrial process of manufacturing : Exclusively with a mechanical crushing of the tires at ambient temperature. The process used does not require and does not reject any kind of solid, liquid or gas additives. Mass distribution of the constituents : - steel fibers and filings : 95, 1 % + or - 2, 7 % - rubber buffings : 3, 3 % + or - 1, 4 % - textile filling and fluff : 1, 6 % + or - 1, 3 % Lengths interval of the steel fibers : [1, 00 + or - 0, 02 mm -> 100, 36 + or - 0, 02 mm]. Diameters interval of the steel fibers : [0, 26 + or - 0, 02 mm -> 4, 73 + or - 0, 02 mm]. In bulk in 40' dry hc (high cube) container
Tlsanli fiber optic chandelier is a creative and innovatory lighting product.Its design and lighting effect is vivid and unique .It is widely used in the decoration of high-class location, such as hotel, night-club, bar, etc.Now many familites trend to use it to decorate their home
Baled Fibre The fibers of the mattress and the fiber mixture can be compressed into balls, each bale weighing about 125 kg to 150 kg, plastic or fiber straps can be used to secure the bales. Load capacity is approximately 20 metric tons and 22 metric tons per 40 feet container, respectively, when using plastic strapping or belt. Bales are a very economical way of transporting fiber for various industries, Other Applications All kinds of fibre mattresses Yarn, Twine & Ropes Brushes & Brooms Door mats and carpets Nursery pots & flower pots Erosion control products
