Material: CARBON STEEL
Tensile strength :> 800mpa
Length: 1 inch
Quality Standards: ASTM- A 820/A 820M ¡§C 04
Packing: 25kg/bag.
25kg/bag.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.
Our u steel rib are cold rolled on our rolling machines and can be used in road .Bridge construtions, and other infrastructure
Special offer, the price of rebar is 795 dollars. CiF The minimum quantity is 12500 LC payment method For contracts minimum one year. Conformity Certificate Type 2.1-ISO 10474 We hereby certify that the products delivered as Ribbed Steel Bars by AQS to BOURAS AHMED with diameters 08, 10, 12, 14, 16, 20 and 25 mm. Followed by all the necessary quality tests (tests and counter tests), comply with the technical specifications of the product and in accordance with the regulations in force.
Steel fiber for reinforcement cement in concrete All types, Endhooked , AFT round wavy , xorex curregated segment Steel specification are ISO & according to AISI 1008 , 1010 standard
Classification of steel fiber The advent of steel fiber is not long, but more and more widely used in the field, with this corresponding, steel fiber varieties are also increasing. According to the shape of the division: Flat steel fiber, pressure prismatic steel fiber, waveform steel fiber, bending hook shaped steel fiber, big head shaped steel fiber, double pointed steel fiber, cluster of steel fiber and so on. 2 according to the section shape: Round, rectangular, groove type, irregular 3 according to the production process: Cut off the steel fiber (cut off with a fine steel wire); Shear steel fiber (with a thin steel sheet, strip shear); Milling steel fiber (steel or steel ingot cutting); Molten steel fiber (molten steel pumping). The most promising is the dissolution of steel fiber, the lowest price 4 according to the material is divided into: Plain carbon fiber (tensile strength is generally in 300~2500mpa); Stainless steel fiber (according to the material 304310330430446, etc.); Other metal fibers (aluminum, copper, titanium and alloy). According to the state of surface coating: No coating, surface coating of epoxy resin, zinc, etc.. The industrial use of a large number of ordinary steel fiber without coating.
