film-coated plywood. Hardwood core like acacia, eucalyptus Humidity:
The name of the product: polyimide film line. Low product introduction: this product is on the high quality copper (aluminum) conductor, well-spaced winding and polyimide film and polyimide fluorine compound film, 4.6 after heating composite fluorine 4.6 melt in the history of film, thin film between the conductor and bonded into a whole. The product has excellent voltage resistance and insulation thickness is thinner, heat resistance up to 220 â??, is mainly used in motor, reactor, electric welding machine or other similar electric product winding. The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for producing polyimide film. Standard: GB/ t7673-2008 and enterprise standards. Production scope: Aluminum flat wire Narrow side size a:1.00mm - 8.00mm. Wide side size b:3.00mm - 25.00mm. Copper flat wire Narrow side dimension a:0.80mm -- 5.60mm. Wide side size b:2.00mm - 16.00mm. Copper aluminum round wire Diameter: 1. 1. Please contact us if you choose the above range. Low material: Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 â??, the resistivity not greater than 0.0280 © was/m Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 â??, the resistivity not greater than 0.017241 © was/m The polyimide film line should be free of cracking to the bare conductor when the diameter of the round rod is bent and the narrow side is bent.
Can supply: ALUMINIUM LAMINATED FILM ROLLS, PRINTED STOCK LOT. Post industrial. Clean. Pack: in big bags. Can load in 1x40HC container aprox. 26 - 28 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information. You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC
GMP DoDY Coating Film USE IN ALL PVC CARD 100 PCS PACK Model: DoDY Coating Film Micron: 760 MICRON TECHNOLOGY: INKJET SIZE: 54X86 MM Colour: TRANSPRENT Type: Plain Compatible With: ALL ID CARDS COATING LENGTH: 18 BREADTH: 7 HEIGHT: 6 Weight: 0.5
We deals in the following products :- 1) Polyester Film 2) Shrink Film
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
15mm Film Faced Coated Plywood with Melamine Film Face is a plywood made with a Hardwood core. Faces are then coated with a high density overlay (HDO) resin impregnated finish that is smooth; perfect for use in applications that require a hard durable surface. Faces are then coated with a high density overlay (HDO) resin impregnated textured finish that provides an ideal anti-skid surface other-wise known as Hardface is a plywood made with a bond glue radiata core and hardwood veneer faces with a high density overlay (HDO) resin impregnated finish that is smooth perfect for use in concrete formwork and can be used several times. Bonding: 'A Bond' (WBP) - a waterproof glue line produced from phenolic resins (WBP -Water Boil Proof adhesive) that will not deteriorate under extreme conditions. It is readily recognisable by its black colour. Size: 2400mm x 1200mm 1800mm x 1200mm 2440mm x 1220mm 1250mmx2500mm 1500mmx3000mm etc. thickness: 9mm 12mm 15mm 18mm 21mm 25mm Applications: Formwork in walls floors roofs frames bridges dams etc.
"size 1.22m*50m (0.04-1.22m as client demand) 25/50/100/150m per roll, width is 50/61/63/100/122cm can be customized between 0.04-1.22m Special cutting, must be ordered 500m/roll" "if the diameter of the curtain pole is 2.6cm, recommend the width of the paper should be 8.6cm, 8.5cm, or 8.3cm If the diameter of the curtain pole is 3.5cm, recommend the width of the paper should be 11.5cm, 11.3cm, or 11.2cm."
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
Our lacquered films are the basic input for the production of a multitude of metallic yarns. The superior coating technology makes the firm resistant to chemical and water. These films are available in a variety of colors and thickness, which makes them suitable for wide range of requirements. We give special treatement while coating polyester film to produce best quality lac. Coated polyester film. Following types of lacquered/coated films are available with us: 1.One side lacquered metallized polyester film 2.Both side lacquered metallized polyester film (d.G. Grade) 3.Lacquered metallized polyester film (extra slippage) Technical properties Ironing temp (max.) - 135oc, 15 sec. Dry heat - No change 180oc, 60 sec. Steaming - No change 30 min. Boiling water - No change 100oc, 1 hr Ethanol - No change 25oc, 30 min. Trichloroethylene - No change 25oc, 30m. Benzene - No change 25oc, 30 min. Acetic acid (5%) - No change 25oc, 30m Washing - No change neutral soap 0.5% 80oc, 15 min. In roll form
The base material of the PET separator is PET, that is, a layer of silicone oil is coated on the surface of the PET film to reduce the adhesion on the surface of the PET film and achieve the effect of release. Conventional thickness from 25um to 150um. There are hot and cold tear and matte surface, after anti-static and anti-scratch treatment, the product has good adsorption and fit. PET film has high temperature resistance, temperature resistance over 220 , and the elongation at break is generally about 30%.
Technical parameters Coating type: Multifunctional coating,coating type can adopt comma scraper coating,anilox roller coating,micro concave roller coating,slot coating or wire bar coating. Effective coating width: 500-1600mm Mechanical speed: 5-50m/min(depends on production technology) Unwinding diameter: equal or less than 850mm�double station,non-stop material changing Rewinding diameter: equal or less than 850mm�double station,non-stop material changing Heating and drying type: Heating cycling wind by centrifugal blower,heating type can adopt electric hearing,heat conduction oil heating,steam heating or hot-blast stove heating. Oven length and temperature control: 15-60m optional oven length,3m for each temperature section, 50-170±2degrees centigrade, automatic controlled temperature. Winding edge planeness: add or subtract 1.0mm Total power: about50-200kw(depends on heating type) Overall dimension: 3950028005000mm(LxWxH)27m of oven For any interest, pls contact us. We provide machine working video and glad to serve on you.
Epe color-film coating machine Jc series epe color-film coating machine applies the most advanced coating technology. It can sticky more firmly and embossing pattern more clearly than normal type epe film laminating machine. It thoroughly overcomes all the weakness of film laminating ma- chine. The finished products with lower price and better quality are widely used as ground mats, creeping mats for babies and so on. It can coating epe products with paper, nonwovens, al, color-strip plastic sheet etc Youtube: cathy li jc-foam
Plastic film coated bamboo stakes/canes: good performance for decoration and gardening. bamboo canes can be coated and covered by the PP plastic sleeve. Plastic sleeve or film covered bamboo canes, It is made of bamboo canes of good quality , dry , natural , and durable , then covered the colors plastic film or sleeves, the sleeves can be in many colors what our clients like, such as green, light green or yellow or black ... etc. It can be used for garden or plants decorations, plants or flower support sticks . Or used into fencing , house wall, trellis or garden edgings and so on. ... The popular sizes is : canes diameter: 6/8mm to 14/16mm, or bigger diam of 20/22-30/35mm length : 60cm,75cm,90cm,105cm,120cm,180cm or 2m,210cm, 240cm,270cm etc.
Chengdu Kanglongxin Plastics Co., Ltd - Leading Flame Retardant Polycarbonate(PC), Polypropylene(PP) Film/Sheet, Clear Coated PET Film Sheet manufacture. Typical Transparent Hard Coated PET Film/Sheet Thickness: 0.2-0.9mm Light Transmission: >89% Haze:
Product characteristics The product is made from wood pulp. In addition to the performance of common cellulose film, it also has the performance of single/double heat sealing, water vapor barrier and fragrance retention. In addition, it has good anti-fog, Anti mold and chlorine-free properties At the same time, it can also be customized. Application It is widely used in packaging fields such as food, medicine, cosmetics cigarette packs decorative packaging, and electronic products,ln addition, this product can also be used for packaging heavy objects and making adhesive tapes.
Tests Value Unit Melt Flow Rate (MFR)2.0 0.4 g/10min Density 920 2 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break 12 Mpa haze 15 %â?¤
Handroll stretch film 12 x 500mm x 300m 12 x 500mm x 500m 15 x 500mm x 300m Machine roll 15 x 500mm x 2000m 18 x 500mm x 2000m 20 x 500mm x 2000m nbsp
Tests Value Unit Melt Flow Rate (MFR)2.0 0.4 g/10min Density 920 2 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Break 12 Mpa haze 15 %
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
