Carbon Brush Kit Plsr Dtsi Ug 2 3 Suppliers and Manufacturers

Red Onion As per your required size and packing. CIF price depends on the order quantity and availability of vessels.

Magnesium Chloride Flakes (MGCL2.6H2O) Packing:25 Kg HDPE Bag As per the order quantity and availability of the vessel, we'll provide you CIF price.

Calcium Chloride Powder-74% CaCl2 92% CaCl2 94% We will provide the CIF price as per your order quantity.

Food Grade--94-96%

Animal Feed Grade:99% Industrial Grade--99% Food Grade--99%

- The tray has wooden handle , is 3 dimensions for the customer option of 22.24, 28 cm - Suitable dishes of food, fruit, decor house, etc - Hardening with shiny material makes the product more beautiful - It has 100% natural, eco-friendly materials - Origin: Vietnam - Production process: * The pre-knitting cloud material is taken out of insects and treated for the best durability. * Weave skillfully with the hand of a craftsman * Burn the leftovers with fire, then codify the insects and clean them with a brush. * Embellishing glue to help the product shape and increase beating strength * Keep checking the dimensions and verifying them carefully. * Sun exposure 1-2 days later put into the kiln to allow the freshly dried product to be bactericidal. * Workers complete the final step of cleaning products and packaging

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Part No 9051

Part No 9003

Natural Sisal Fiber Type 1 Type 2 Type 3 Type 4 Sisal Fiber UG Grade Length: 110CM-130CM with a tolerance of 20%. Moisture: 10%-13% Impurity: 0-3% Classification per Grade: TYPE 1 - Colour whitish/soft cream, well brushed humidity maximum 14% without knots. Color: natural white, Brown and between white and brown. TYPE 2 - Colour cream/yellowish, well brushed humidity maximum 14% without knots. TYPE 3 - Colour cream/yellowish, well brushed humidity maximum 14%, without knots. REFUGOS (REJECT) - Colour brownish/green, humidity maximum 14%, presence of knots and high percentage of impurities. BUCHA (TOW) - Colour yellowish/brownish, humidity maximum 14%, presence of knots and a very high level of dust.

Natural Sisal Fiber Type 1 Type 2 Type 3 Type 4 Sisal Fiber UG Grade Length: 110CM-130CM with a tolerance of 20%. Moisture: 10%-13% Impurity: 0-3% Classification per Grade: TYPE 1 - Colour whitish/soft cream, well brushed humidity maximum 14% without knots. Color: natural white, Brown and between white and brown. TYPE 2 - Colour cream/yellowish, well brushed humidity maximum 14% without knots. TYPE 3 - Colour cream/yellowish, well brushed humidity maximum 14%, without knots. REFUGOS (REJECT) - Colour brownish/green, humidity maximum 14%, presence of knots and high percentage of impurities. BUCHA (TOW) - Colour yellowish/brownish, humidity maximum 14%, presence of knots and a very high level of dust.

* Ash Content: 3% * Moisture: 2% * Fixed Carbon: 91.3% * Calorific Value: 8000 kcal/kg * Burning Time: 4-5hours

Moisture - < 3% Burning time - > 2.5 Hours Heat Value (Calory) - > 7500J/kg Fixed carbon - 80%~95% Ash - < 2% Color - Black Packed in carton boxes 25x25x8 cm, avg. 2.7 kg per box. Any other packing on request. Charcoal for hookah(Shisha) 1) Our hookah briquette is manufactured from high-quality grade â??Aâ?? birch coal. 2) During burning our product emits natural fine aroma that will be to the liking of true connoisseurs. 3) Due to special manufacturing technology our briquette burns longer and hotter than equivalents from other manufacturers. 4) When used our coal does not become loose and leaves minimum ash afterwards. 5) Environmentally friendly product that does not harm the environment. 6) We guarantee a stable quality of our product.

Moisture - < 3% Burning time - > 2.5 Hours Heat Value (Calory) - > 7500J/kg Fixed carbon - 80%~95% Ash - < 2% Color - Black Packed in carton boxes 25x25x8 cm, avg. 2.7 kg per box. Any other packing on request. Charcoal for hookah(Shisha) 1) Our hookah briquette is manufactured from high-quality grade â??Aâ?? birch coal. 2) During burning our product emits natural fine aroma that will be to the liking of true connoisseurs. 3) Due to special manufacturing technology our briquette burns longer and hotter than equivalents from other manufacturers. 4) When used our coal does not become loose and leaves minimum ash afterwards. 5) Environmentally friendly product that does not harm the environment. 6) We guarantee a stable quality of our product.

Our range of industrial flanges are ideal for application in diverse industry for high pressure and temperature applications. These flanges are designed with precision for easy installation. Apart from standard flanges, we also offer custom designed flanges to meet the specific application requirements of the customers. 1] Stainless & Duplex Steel Flanges 2] Carbon & Alloy Steel Flanges 3] Nickel & Copper Alloy Flanges 4] Hastelloy Flanges 5] Inconel Flanges 6] Incoloy Flanges 7] Monel Flanges 8] Aluminium Flanges 9] Titanium Flanges