PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Brown Rice
Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality abrasive bauxite as raw material.It is characterized by good self-sharpening and high grinding ability. Brown Fused Alumina can produce ceramic grinding wheel ,resin grinding wheel.And BFA could be used for abrasive,sandblasting and precision casting. Brown fused alumina for Abrasive SandblastingPrecision casting advantages: 1) Not affecting the color of the processing cases. 2) Sandblasting in the non-iron process. 3) High speed processing. 4) Very low amount of iron oxide, suitable for non-ferrous blasting operations. Brown fused alumina for refractory advantages: 1) High quality bauxite as raw material 2) Refractory temperature is more than 1900°C 3) No burst,no pulverization and crack in the using course of refractory 4) Very low amount of iron oxide Brown Fused Alumina for AbrasiveSandblastingPrecision casting Packing: 1 MT big bag or 25kg paper bag *40 bags on one pallet ;As per customers requirement Remark: specification and size can be optimized by per customer' requirement FAQ : Q1. Will the FREE SAMPLES be provided for buyers? - YES. We will provided FREE SAMPLE about 1kg Q2. How about the express fee? - Our companys policy is the buyer pay for express fee. Q3. Is there QUALITY REPORT for the products? - YES. We provide quality report of our company or CIQ,SGS according to clients requirement
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications. Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries. Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability. Join us in our mission to promote environmental responsibility while meeting your industrial needs.
Technical Data Sheet Of Accoset-50 ALUMINA MORTAR (Test Certificate) General Properties A. Max service temperature - 1500 oC B. Maximum grain size - 0 - 1.5 mm C. Water required for mixing - 22 - 30% D. Setting - Airsetting E. Sintering Temp - 1550 oC Chemical Properties A. Al2O3 - 50.00% B. SiO2 - 31.00% c. Fe2O3 - 5.00% D. LOI - 7.00% Physical Properties A. Dry Density - kg / m3 B. CCS - 17 kg / cm2 after drying at 110C / 24 hr C. MOR - 20 kg / cm2 at 110 oC/ 24 hr 18 kg/cm2 at 800 C/ 3 hr Thermal Properties - A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC Packaging - 25 - 50 kg bags Storage Life - 12 months Delivery State - Dry
Brown fused alumina is  fused and crystallized under high temperature from a mixture of   calcined bauxite,coke(anthracite),scrap iron  and other raw materials. Brown fused aluminum oxide is a tough, hard material (Mohs hardness 9) with high strength, excellent wear and corrosion resistance and good thermal conductivity. Brown Fused Alumina, for premium quality refractory products making, high Al2O3, low impurity, high toughness, widely used for making refractory bricks, cement castables and mortars. z
Broken: 5% max. Moisture: 14.5% max. Foreign matters: 0.1% max. Chalky kernels: 6.0% max. Red & red streaked kernels: 2% max. Damaged kernels: 1.5% max. Glutinous kernels: 1.5% max. Yellow kernels: 0.5% max. Paddy (grains/kg): 15 grains max. Average length: 6.2 mm. Whole of grain: >=60% max. Green kernels: 0.2% max. Crop year: new crop. Rice quality: Purity, unmixed. The taste: natural fragrant of rice. The storage condition: Put a dry and cool place, avoid a humid place. Expiry date: 12 months from the production date.
High Temperature Resistance Brown Fused Alumina BFA Grain For Refractory Ramming High Temperature Resistance Brown Fused Aluminuim Oxide BFA Grain 3-5mm For Refractory Ramming.Brown Fused Alumina is fused and crystallized under the high temperature of above 2250�°C with high quality abrasive bauxite as raw material.It is characterized by good self-sharpening and high grinding ability. Brown Fused Alumina can produce ceramic grinding wheel ,resin grinding wheel.And BFA could be used for abrasive,sandblasting and precision casting In order to meet the demands of the refractory industry, we independently develop and produce RS brown fused alumina. Which is characterized by high purity,good crystal,strong fluidity,low coefficient of linear expansion,good corrosion-resistance and so on. RS Brown fused alumina could not burst,pulverise and craze in using course. Brown fused alumina for refractory advantages: 1) High quality bauxite as raw material 2) Refractory temperature is more than 1900�°C 3) No burst,no pulverization and crack in the using course of refractory 4) Very low amount of iron oxide
Indian Granite Coffee Brown: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes : Mirror, Matte, Flame finish etc. Slabs : Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles : 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Indian Granite Tan Brown: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
Brown fused alumina is manufactured in electric arc furnace, using bauxite as raw material. High hardness and toughness, it is an important raw material of abrasive and refractory industries. It can be used for belt, ceramic, coated, high-grade, and organic abrasives. The product can be used as abrasive and refractory material. The abrasive tools made by brown fused alumina are suitable for grinding carbon steel, normal alloy steel, malleable cast iron and hard bronze, etc. Brown fused alumina can also be used for making fine quality refractory. Brown aluminium oxide has high toughness. Micro hardness is 1800-2200kg/mm2, abrasive articles made of it are suited for grinding metals of high-tensile strength such as steel, annealed malleable iron and hard high-class refractory products. The application scope of brown fused alumina: 1. For abrasive 2. For refractory materials 3. For sandblasting abrasive 4. For abrasion resistance ground 5. For producing mold of precision casting. 25kg/bag or 1ton/bag or as your requirements
BFA Brown Fused Alumina powder in refractory Brown corundum micro powder is produced by a reduction fusion of high quality bauxite in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications.Its thermal properties make it an excellent raw material for abrasive and refractory applications. Advantages Of Brown Corundum Powder: 1. Large crystal, high strength, good toughness, dense texture, high bulk density. 2. Stable performance between batches. 3. The higher grinding efficiency and polishing brightness, the grinding efficiency is much higher than the soft abrasives such as silica. 4. Good particle appearance, high surface finish of the polished object. Product Parameter Grains Specifications And Composition JIS 240#,280#,320#,360#,400#,500#,600#,700#,800#,1000#,1200#,1500#,2000#,2500#,3000#,3500#,4000#,6000#,8000# European standard F240,F280,F320,F360,F400,F500,F600,F800,F1000,F1200,F1500 National standard W63,W50,W40,W28,W20,W14,W10,W7,W5,W3.5 Applications High Quality Brown Fused Alumina Powder for Precision Casting Bfa Brown Fused Alumina Powder in Refractory 1.Grinding and polishing of stainless steel, optical glass, bamboo or other materials. 2.For polishing various spare parts: bicycles, sewing-machine, hard metal tools, medical apparatus, timepieces, glass products and stone grinding. 3.For making abrasive tools: fiber-reinforced cutting wheels, grinding wheels, sand cloth, paper and paste. High Quality Brown Fused Alumina Powder for Precision Casting Bfa Brown Fused Alumina Powder in Refractory
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
Spec as following: Color: white and brown Fiber length: 5-20cm Moisture content: max 15% Impurity content: max 3% Ash content: max 5% Quantity: 1000MT/month Packing:100,120,150 kg bales Country of Origin: India.
Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
Indian Granites: Indian Granite: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing. 1. Indian Granite-Black 2. Indian Granite-Black Galaxy 3. Indian Granite-Black Pear 4. Indian Granite-Coffee Brown 5. Indian Granite-Coral Gold 6. Indian Granite-Jasemine White 7. Indian Granite-River White 8. Indian Granite-Sappahire Blue 9. Indian Granite-Silver Waves 10. Indian Granite-Steel Grey 11. Indian Granite-Tan Brown 12. Indian Viscon White 13. Indian Granit-Aspen White
Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality bauxite, carbon and iron as raw material. Our product characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion, good corrosion-resistance and so on. Could not burst, no pulverization and crArtificial brown corundum / brown fused alumina gritack in using course of refractory.
SPECIFICATION Shelf Life: 6 Months Type: Snack Sample: Sample Acceptable Packing: Client Requires
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
