Bitumen Waterproof Membrane Suppliers and Manufacturers

Specification thickness:2mm 3mm 4mm 5mm width:1m length:7.5m,10m,15m Certificate CE,ASTM standard, ISO Pakaging 7.5sqm or 10sqm per roll plastic sack by rolls or pallet

Can be produced by carding, needle punching, dipping and finalizing technics with high-strength short fiber. It is first choice of base mat for APP/SBS and has been widely used in the industry of building. Major features: 1. Good tensile strength and elongation. 2. Good thermal stability and tear strength. 3. Good strength for preventing thrust and soaked easily. 4. Good in anticorrosion and aging-resistant. Width 1.02m, length 1200m, rolling in plastic film.

Bitumen waterproofing membranes .

Chloride polyethylene This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, water pool, reservoir, dam, sewage treatment pool, garbage landfill field, etc., it is one of middle and top grade waterproof materials. No. Itemclass nclass lclass w 1tensile strength, mpa5 Tensile force, n/cm 7070 2elongation at break, %200125125 3heat treating size changing rate, %_ 311 4flexibility at low temperature 20¦, crack-free 5permeability resistance (0.3mpa-2h) watertight 6puncture resistance water resistant 1.2mm*1m*20m 1.5mm*1m*20m 2.0mm*1m*20m

SBS Elastomer modified bitumen membrane is SBS thermoplastic elastomer modified asphalt roofing, high-quality polyester felt, glass fiber mat, glass reinforced polyester mat for the child based, sand, mineral therapy, PE film, aluminum as cladding material, the use of special mechanical mixing and grinding of the elastomer modified bitumen membrane. Plastic modified bitumen waterproofing membrane APA0 or APP0, AP0 to modified asphalt roofing, high-quality polyester felt, glass fiber mat for the child based, sand, mineral grains chat, PE coverage of membrane materials, use of advanced technology refined plastic modified bitumen membrane. BRAND:XINLEI SPECIFICATIONS: 1.Width:1m or as customized 2.Length:from 5-20Meters as customeized 3.Thickness:2/3/4/5mm 4.Face:PE film,colorful sand,mineral granules and Aluminium Foil anti-sunshine and anti-ageing

The sbs modified bitumen waterproof membrane is in polymer modified bitumen for coating,long fiber polyester fiber felt for tire body,metal foil,fine for finish,polyethylene film for isolation layer of a kind of soft waterproof material.Mainly used for high speed railway bridge deck waterproof,this product has good performance, and waterproof construction simple characteristics. Features: 1) APP/SBS modified bitumen waterproof membrane: a) Conforms to the national standards b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area c) APP is specially suitable for areas of high temperature and of strong sun-shine Item APP/SBS modified bitumen waterproof membrane Brand Xinlei Waterproof Grade FirstSecond Base PY G Cover PE S M Al Thickness/3/4mm Color Black PE film(or other colors) Yellow/green/other Fine Sand Grey/Green/other MineralGrains/Flakes Aluminum Foil Notes PY------Polyester Base G-------Glassfibre Base

Advantages of SBS Self Adhesive Waterproofing Membrane 1) Unique self-healing function 2) Strongcohesion with base surface 3) Superiorbond strength between membrane and membrane 4) Excellentelongation that can adapt base surfacedeformation and cracking 5) Simple in construction Application of SBS Self Adhesive Waterproofing Membrane 1. Building roof (Non-outer appearances) 2. Basements, tunnels, pools and other water projects 3. Non-exposed roofing projects that can not use fire to performance

Polythene polymer Compound Waterproof Membrane High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives . High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years. Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect. High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product Fields of application: The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects. Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction

Bitumenous waterproofing membranes.Export

Bitumen waterproof membrane.

We are manuacturer which is specilized in producing polyester mat layer for sbs/app bitumen membane. Our products are widely accepted by customers from south america and asian markets. Features of polyester mat for bitumen membrane: 1) ideal substrate material for asphalt waterproofing rolls and shingles 2) act as reinforcement layer in bitumen waterproof materials, with sbs or app memrane 3) excellent binding strength with sbs/app modified bitumen 4) high tensile strength, high tear strength, higher elongation property, higher measure stability and resist shrinking in the high temprature process 5) corrosion resistance, aging resistance, thermal stability, good soak in bitumen oil 6) protect polymer foam insulation from the damaging effect caused by chemical solvents in bitumen to prolong the life time of heat insulation layer The mat has weight range rom 120gsm-220gsm for usual, and have white and green color for your chosen. Size: 1.02x1350m/roll Diameter:1.03-1.03m Weight:256kg/roll(defferent from gsm)

Available with different reinforcement of polyester, glass fiber or compound reinforcement. Obtained modifying a distilled butumen, they have an extremely high elasticity. PE film, fine sands, or mineral slates are used as finishing surfaces. Specifications: Thickness available: 2mm, 3mm, 4mm Width: 1m Length: 7.5m, 10m, 15m It may be applied by cold or hot-melting method with easy application, featuring no pollution and long service life. In a wide application, such as basements, toilets, ponds, civil and industrial roofs, car parks, bridges, swimming pools, tunnels and refurbishment of bitumen roofs etc. It is specially suited to use in the cold area and buildings with frequent structural movements. 1m*10m/roll

Polyethylene polypropylene polymer composite waterproofing membrane is a polymer composite coil (sheet) which is made of polyethylene resin as the main raw material.Adding various additives,then once formed by calendering process , and is a surface (double-sided) composite polypropylene non-woven fabric . A multi-layer polymer synthetic sheet material is selected, is a new type of waterproof material manufactured by a new technology and process. The product has high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, easy adhesion, small friction coefficient, can be directly used in sand, stable and reliable performance, is a non-toxic, non-polluting Green products.

Chloride polyethylene This product applies to various waterproof and anti-corrosion projects of industrial and civil buildings, such as roofing, basement, tunnel, cave, water pool, reservoir, dam, toilet, bathroom, floor, sewage treatment pool, garbage landfill field, etc., mainly applies to the waterproof projects of buildings with higher requirements of waterproof grade. No. Item product index Jl2 type n 1tensile strength at break, mpa Normal temperature .05.0 2 elongation at break, % 400250 3tearing strength, kn/m normal temperature 2420 4water tightness0.3mpa-30minregular 0.2mpa-30minregular 5 flexibility at low temperature, ¦ < -30-20 6hot air aging hold-up rate (80¦-168h)tensile strength hold-up rate at break, % 80 Elongation hold-up rate at break, % 70 100 ·± tensile strength hold-up ratecrack -free 7heating elongation and shrinkage, mmelongation

TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants

Hpm-p polyvinyl chloride (PVC) series waterproof rolling materials, is a new type of polymer waterproof rolling materials processed with polyvinyl chloride resin as raw material, plasticizer, antioxidant, filler, ultraviolet absorbent and other auxiliary agents. Product Feature * superior aging resistance * resistant to root penetration, especially suitable for planting roofing * welding construction, weld solid and reliable and environmental protection and pollution free * high tensile strength, good elongation, good dimensional stability * has good plasticity * with self-extinguishing function * colorfast and pollution-free Product advantage * flexible material, suitable for various architectural shapes * quick construction and short time limit * less affected by weather conditions, flexible construction

Thermoplastic polyolefin (TPO) rolls, which use advanced polymerization technology, combine the durability and weather resistance of ethylene - propylene (HP) rubber with the thermal weldability of polypropylene.The coil has long - term weather resistance and does not use plasticizer. Product Feature 1. Few auxiliary materials, convenient construction and good system integrity; 2. Excellent tensile, tear and puncture resistance; 3. No plasticizer, no plasticizer migration problem, excellent heat aging resistance and uv resistance, direct exposure, large thickness above the base, durable; 4. Hot air welding, high seam peeling strength (twice as high as PVC); 5. Fast welding speed; 6. Chlorine free and 100% recyclable, environmentally friendly; 7. Maintain excellent thermal welding performance for a long time, easy to repair; 8. Smooth surface, no fading, anti-pollution; Scope of application Widely used in industrial and civil and public buildings of all kinds of roofing waterproof works.

Hy120 polythene membranes , bitumen sbs app waterproof membranes . self adhesive bitumen waterproof membranes.

1. Capacity: 5 to 10 million square meters per year. 2. Carrier: Polyester, fiberglass, composite 3. Modifier: SBS, APP 4. Surfacing material: sand, slate, PE film, aluminum foil etc., Embossed or plain. 5. Speed: 0~40m/min, adjustable 6. Total installed power: 110~700kwh 7. Fuel consumption: 0.6 million ~2 million kcal/h 8. Water consumption: 0.2 t/day 9. Operator: 8~12 10. Min size of main workshop: 60,15,8 (L*W*H) 9 pieces of 40 feet HQ, 16 pieces of 40 feet OT.