Bioreactor
Electric arc furnace is using electricity as fuel source, and utilizes the arc high temperature produced by electrode and furnace charge to heat and melts the furnace charge. It is widely using in production of normal steel, high quality carbon steel, various alloy steel, stainless, various ferroalloys. It is the key equipment in steel making factories, foundry factories, ferrous alloys making factories and etc. Characteristic: 1.Smelting temperature is flexible to be controlled, to meet different steel grade production needs. 2.High heat efficiency, atmosphere inside furnace can be controlled. 3.Can remove the phosphorus, sulfur, oxygen and other impurities and improve steel quality. 4.Easy to control the chemical composition of steel, stable and high recovery rate of alloys. 5.Equipment is simple and shorter technological process. Adoption of new technology: 1.Optimization design 2.Tubular water cooled furnace wall and furnace lid Eccentric bottom tapping (ebt) Copper-steel combined electrode arm 3.Cluster type large sectional area water cooled cables Optimize large current system structure (energy-saving type) Proportional valves hydraulic system Basic level (plc) + procedure level ( industrial control computer) control system Frequency control technique Network technique Standard export package
Electric arc furnace uses electricity as fuel source and utilizes the arc high temperature produced by electrode and furnace charge to heat and melt the furnace charge. It is widely using in production of normal steel, high quality carbon steel, various alloy steel, stainless, various ferroalloys. It is the key equipment in steel making factories, foundry factories, ferrous alloys making factories and etc. 5-100 ton, transformer 2500-80000kva
Submerged arc furnace¡ait¡¡¥s also known as electric arc furnace or resistance electric furnace. It is mainly used to reducing smelting ore, carbonaceous reducing agent and solvent etc. Mainly adapts to production of ferrosilicon, ferromanganese, ferrochrome, ferrotungsten, silicon manganese alloy and other ferrous alloys, it is an important smelting furnace in metallurgical industry for production of industrial raw materials and calcium carbide and so on chemical raw materials. The working character is to use carbon or magnesia refractory materials as furnace lining, use self roasting electrode. Electrode inserts into the materials inside the furnace for submerged arc operation, using arc energy and current through the materials, and due to the resistance of the materials and produce energy to melt metal. It¡¡¥s a kind of industrial furnace which is worked continuously, charged material in succession, and tapped out metal or slag in intermittent. Capacity:3000kva-33000kva, smelting different ferroalloy by ores.
Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
Eaf is mainly used for smelting high-quality carbon steel and other alloy steel. According to different power, is divided into ordinary power, high-power and ultra-high-power electric arc furnace. 10t capacity eaf and above are all equipped with the hydraulic drive and hydraulic lifting system is imported electrode proportional valve control.
Electric arc furnace is using electricity as fuel source, and utilizes the arc high temperature produced by electrode and furnace charge to heat and melts the furnace charge. It is widely using in production of normal steel, high quality carbon steel, various alloy steel, stainless, various ferroalloys. It is the key equipment in steel making factories, foundry factories, ferrous alloys making factories and etc. Characteristic: Smelting temperature is flexible to be controlled, production needs. High heat efficiency, atmosphere inside furnace can be controlled. Can remove the phosphorus, sulfur, oxygen and other impurities and improve steel quality. Easy to control the chemical composition of steel, stable and high recovery rate of alloys. Equipment is simple and shorter technological process. Adoption of new technology: Optimization design Tubular water cooled furnace wall and furnace lid Eccentric bottom tapping (ebt) Copper-steel combined electrode arm Cluster type large sectional area water cooled cables Optimize large current system structure (energy-saving type) Proportional valves hydraulic system Basic level (plc) + procedure level ( industrial control computer) control system Frequency control technique Network technique Standard export packaging
Electric arc furnace We supply vaious capacity from 3 t to 100t/h electric arc furnace. Electrica arc furnaces have many function and suitable for; [1] melting of scraps; [2] temperature control of liquid steel; [3] adjustment & control of chemical composition of liquid steel; [4] adding fluxes for desulphurization, de-phosphorization and de-oxygen to liquid steel; [5] pre-reduction via de-oxygen for reservation of chromes; [6] to guarantee the production beat coordination of eaf with the ladle furnace, vacuum tank degassing plant and argon-oxygen decarburization plant as well as the continuous casting machine, etc. So as to realize continuous casting by multi-heats. For electric arc furnace, we can provide complete turn-key project, including installation, commissioning.
Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours.
Arc furnace, induction furnace, melting furnace -
For smelting carbon steel, high quality carbon steel and various alloy steel. It applies to all steel scrap, hot metal crap, pelletizing and preheating steel scrap, hot briquetted iron and sponge iron, etc.
We provide the clients with comprehensive and high-quality products by our exquisite and perfect technologies and offer specialized service support by highly efficient and rapid response capabilities, so as to spare no efforts in creating the utmost scientific and technological values for the clients. We sincerely hope that we can get ;;win-win;;¨¤ ending with insightful men from home and abroad hand in hand.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
EAF-50t Electric Arc Furnace The actual power consumption per ton of steel is 610-180-200-10=220 kWh Namely, the actual electrical energy needed for melting, phosphorus removal and heating up to the tapping temperature of 50% scrap steel and 50% molten iron in the arc furnace, (1630) is 220 kWh/t (e.g. oxygen blasting 50Nm3, metal charging 60%, electrical consumption 160kWh/t).
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, Bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) Automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) Waste food solutions .Our logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
