Anti Bedsore Air Mattress Oam002 Suppliers and Manufacturers

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Fresh corn cleaning production line ,clean vegetable cleaning and air drying assembly production line, prefabricated vegetable processing equipment,different capacity customized . Machine features : 1.Universal adjustable nozzle, uniform spraying, stable without unhook, 360degree adjustable cleaning. 2.Circulating water tank, filter impurities in the product cleaning process to prevent clogging of the nozzle. 3.Automatic control, simple operation 4. Vortex air pump, strong wind, anti-seismic base, wear resistant. 5.Motor mute energy saving. Corn bubble cleaner production line also can process : Leaf vegetables, root vegetables, fruits, Chinese herbs, edible mushroom, aquatic products and seafood . Good business investing low cost high profit!

400mm/16 Inch Sweep 1250 RPM Speed Motor Double ball bearing motor assuring no motor jam no motor burining Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life 65cmm stronger air delivery 55 Watts Energy efficient motor for power saving 3 speed choices with sleek and attractive switch panel Large & Heavy base for enhanced stability

High Performance Fans Pedestal Fans OPF-3297 White - 400mm/16 Inch Sweep 1250 RPM Speed Motor Double ball bearing motor assuring no motor jam no motor burining Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life 65cmm stronger air delivery 55 Watts Energy efficient motor for power saving 3 speed choices with sleek and attractive switch panel Unique Telescopic arrangement for height adjustment Large & Heavy base for enhanced stability

High Performance Fans Wall Mounting Fans Model : OWF-3127 White 400mm/16 Inch Sweep 2000 RPM High Speed Motor Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Elegantly Designed Fan Base Strong Wall Mounting Metal Clamp Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life 105 cmm stronger air delivery 110 Watts Powerful motor Pull Cord Control for 3 Speed Choices Pull Cord for Wide Oscillation Control.

High Performance Fans Wall Mounting Fans OWF-3107 Gun Metal 400mm/16 Inch Sweep ? 1250 RPM Speed Motor ? Double ball bearing motor assuring no motor jam ? no motor burining ? Innovative Design ? Aesthetic Looks ? Sleek and Stylish ? Aerodynamically Designed and Balanced blade for Superior Air Delivery ? Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle ? Jerk Free and Uniform Oscillation ? Elegantly Designed Fan Base ? Strong Wall Mounting Metal Clamp ? Long lasting Powder coated guard set & Polymer Ring for anti-corrosion ? 100 % copper wire motor for long life ? 65cmm stronger air delivery ? 55 Watts Energy efficient motor for power saving ? Pull Cord Control for 3 Speed Choices ? Pull Cord for Wide Oscillation Control.

High Performance Fans Wall Mounting Fans OWF-3147 (12?) Gun Metal 300mm/12 Inch Sweep 1250 RPM Speed Motor Double ball bearing motor assuring no motor jam no motor burining Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Elegantly Designed Fan Base Strong Wall Mounting Metal Clamp Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life 45cmm stronger air delivery 45 Watts Energy efficient motor for power saving Pull Cord Control for 3 Speed Choices Pull Cord for Wide Oscillation Control.

High Performance Fans Wall Mounting Fans OWF-3117 Truly Grey 400mm/16 Inch Sweep 1250 RPM Speed Motor Double ball bearing motor assuring no motor jam no motor burining Innovative Design Aesthetic Looks Sleek and Stylish Aerodynamically Designed and Balanced blade for Superior Air Delivery Tilt Adjustment for Adjusting the Fan Upward & Downward at desired Angle Jerk Free and Uniform Oscillation Elegantly Designed Fan Base Strong Wall Mounting Metal Clamp Long lasting Powder coated guard set & Polymer Ring for anti-corrosion 100 % copper wire motor for long life ? 65cmm stronger air delivery ? 55 Watts Energy efficient motor for power saving ? Pull Cord Control for 3 Speed Choices ? Pull Cord for Wide Oscillation Control.

Function Gas mask Can prevent various organic gases, such as formaldehyde, gasoline, ether, suitable for spray paint, oil, machinery, polishing, dust and other workplaces A.The full face gas mask made by high grade silica gel, endure the aging , avoiding allergy, durable , easy to clean. B. Double-folded the silica gel structure enhanced air tightness and face fitness C. The dual headphone with adjustable straps design more comfortable to wear D. Push type and replaceable cartridge E. The unique audio device, allowing you to disseminate the messages more clear. F-Large valve disc breathing valve design,breathing resistance is small,let the wearer enjoy smooth breathing. G.Double filtration box filtration, double filtration area, low breathing resistance -The universal installation structure can be separately anti-virus or dust-free, and can be easily switched. -Military active carbon with large adsorption capacity and high Strength -Double filtration agent has long service life Half Face Gas Mask is composed of the body of mask, the cartridge, Inhale and exhale valves, headbands. -It is designed for painting and organic vapor protective (95% effectiveness) - The mask can be taken off and hanged on the neck during rest time. - Replacement parts available, filters sold separately.

High Anti-Leak, High Air-Permeability, High Filtration Provide full protection. Upgraded anti-leak and protection. Patented anti-leak side films, effectively prevent side leaks. Widen ear bands reduce the feeling of being tied up. Excellent elasticity ear bands fit the face snugly, reducing side leaks. 1.Size: for adult 2.Available for 3 layers 3.OEM/ODM/Customization are available

Code 93170: Suitable for Anti-pollen and air pollution. Features Medical level for general use. Non-woven material 99% BFE at 3 micron. Type: Flat shape, 3-ply, non-sterile, earloop Color: Black Nose band: PE iron wire Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven

Lemon oil is stimulating while it is calming. It has anti-infection, astringent, detoxifying, antiseptic, disinfectant, and antifungal properties. Lemon oil works in many areas of your life, from household cleaning to supporting brain energy and freshening the air. As an extra bonus, lemon oil adds flavor to your water or your favorite foods, all while helping you get rid of bacteria! Lemon oil blends well with many other essential oils including lavender oil, rose oil, sandalwood oil, peppermint oil, geranium oil, and tea tree oil, making it a popular oil for herbalists and those who practice the healing art of aromatherapy.

Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Product advantages: ï?¬All-in-one design, high integration and space saving installationï¼? ï?¬Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 yearsï¼? ï?¬Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics Built-in BMS management system with comprehensive protection and monitoring control functions 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed