Aluminum Wire with Good Conductivity There is a coil of aluminum wire on white background. Aluminum wire has good conductivity performance, widely used in electronic and machinery industry, power station. Aluminum wire: Standard: ASTM B230¡§C85. Wire diameter: 0.12mm - 5mm. Tensile Strength: 103 ¡§C 38N/mm2. Conductivity: 61.4% of IACS. Features Smooth surface, light, weight, durable. Good toughness, high intensity. Good conductivity. Heat-resistant, fire-proof. Application: widely used in mesh weaving, crafts making, electronic industry, machinery industry, power station, construction, also can be made into cables. Packing: in coils, spools. There is a spool of aluminum wire on white background. Aluminum wire can be produced in the form of spool. There is a piece of aluminum wire mesh with gray background. Aluminum wire is usually used in wire mesh weaving. There is a dragon craft made of aluminum wire. Aluminum wire is usually used for making crafts. There are four cables made of aluminum wire. Aluminum wire is widely used to make cables because of its excellent conductivity.
Aluminum wire (Pure Aluminum Wire, Aluminum Line and Spray Finishing Aluminum Wire) ,The surface of aluminum wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application. The product adopts high quality aluminum ingot, no other substances enter the process from raw material (aluminum ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminum wire is guaranteed to be above 99.7%. Specifications Composition : Al 99.7% Diameter:1.2-4.75mm Package : 20-150kg/bundle , 7kg/Spool Characters 1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit. 2. The parent material doesn t change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly. 3. The thickness of coating varies in a large range, from several microns to several millimeters. 4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products. Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminum are forbidden. Aluminum segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain. Application Aluminum wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
Here we provide 7 types of most competitive wire bonder, 4 Types of manual wire bonder, and 3 types of automatic wire bonder. And the 3 automatic: automatic thin aluminum wire bonder MD-Etech1850(18-50um aluminum wire); automatic ball bonder MD-S800(15-50um Au or alloy wire); automatic heavy wire bonder MD-CWX-3710(125-500um Aluminum wire). The most competitive 4 types:thin aluminum wire wedge bonder MDB-2575(25-75um aluminum wire);Wire wedge bonder MDB-25125(25-125um aluminum wire); heavy aluminum wire wedge bonder MDB-7550(75-500um aluminum wire);gold wire ball bonder MDBB-1750(17-50um gold wire). they are very popular for samll quantity production, school,institution,research department.
Alluminium wire 99.7 % pureity
Aluminum wire rod As one of the biggest manufacturer and exporter of aluminum billet and aluminum wire rod in china, the capacity is 80, 000 mt annual and exporting to korea, germany, canada, usa, spain, united kingdom etc more than fifteen countries and areas, we had obtained the certificate of iso9001-2000. We mainly produce the following kinds of aluminum billet and aluminum wire rod, 1.Aluminum billet Diameter: 85mm, 120mm, 127mm, 152mm, 172mm, 178mm, 222mm Size: 6063, 6060 Chemical elements: si: 0.20-0.50%; fe: 0.12-0.25%; mg: 0.47-0.53%; cr: 0.30%max; zn: 0.02%max; ti: 0.05-0.15%; aluminum element 99.7% min. Length: 356mmíó407mmíó610mmíó700mmíó4750mmíó5800mm, etc or according to your requested. 2. Aluminum wire rod Size: ª¦9.5mm, ª¦12mm Chemical elements: al99.7%min, fe 0.15~0.25%, si 0.03~0.06%, cu 0.003% Physics specification: conductivity: 61.55%iacs min; tensile strength: 95~110mpa;110~120mpa;120~130mpa; elongation 8~15; electric resistivity at 20 degrees c µª+cm max 2.081. Packing: export standard packing Payment: 50% t/t in advance, another 50% payment against irrevocable l/c at sight We would like to establish long-term and friendly trade relations with you. We promise we will try our best to supply high quality products, favorable price, delivery time and satisfied service, establish a good base for the cooperation of our both parties in future. Export standard packing
in all sizes are available
Insulation :pew / uew / aiw / ei/aiwthermal index : b/130 f/155 h/180 c/200products standard :iec/ nema mw / jis / gbdiameter range: 0.1-3.0mmlead time: 7-20 days Wrapping: different spools according to wires size + cartons + pallet, or upon customizing.
Diameter 0.12mm to 8mm, fob Shanghai. As customer's request.
Manufactures enameled super aluminum wire from first grade aluminum material and can stand high voltage resistance upto 5000. Insulation with branded quality varnish "bawa" . Small PVC reels put 18 reels together in one corrougated carton. Each reel is marked gross weight, tare weight and net weight details and cartoon is marked with total gross weight, tare. Weight and net weight. Cartoon is tightened by pvc 5 straps properly. Packing can be provided as per customer requirement by paying extra cost if any.
1. Solderable Polyurethane Aluminium Enameled Winding Wire, Class 130ú¿UEW/A/130ú¬ 2. Polyester Enameled Aluminium Enameled Winding Wire Class 130(PEW/A/130) 3. Modified Polyester Aluminium Enameled Winding Wire, Class 155(MPEW/A/155) 4. Ployesterimide Enameled Round Aluminum Wire, Class 180(EIW/A/180) 5.Polyesterimide Overcoated With Polyamideimide Aluminium Enameled Winding Wire, Class 200 (EI/AIW/A/200) 6.Polyesterimide Overcoated With Polyamideimide Aluminium Enameled Winding Wire, Class 220(EI/AIW/A/220) 0.15-3.20MM
Aluminum wire 0.10-6.0mm
2. Product introduction 1) Enameled round aluminum wire Producing scope: 0.1mmí¬6.0mm Suitable insulation: UEW/PEW/SEIW/EIW/EAIW/AIW/NEW 2) Enameled rectangle aluminum wire Producing scope: 5mm2í¬80mm2 Conductor size: a(thickness): 1.1mmí¬25mm ; b(width): 1.4mmí¬25mm The rate of width and thickness: 1.5 3) Copper clad wire Producing scope: 0.1mmí¬6.0mm 4) Enameled round copper wire Producing scope: 0.1mmí¬6.0mm 5) Silk clad wire, paper clad wire Producing scope: 0.1mmí¬6.0mm 6) Bare aluminum wire Producing scope: 0.1mmí¬6.0mm Packing term: packed in cartons on pallet and lined with single polymembrane inside The minimum order quantity: the total quantity(all size) one 20í»container Payment term:t/t(40% payment at advance, 60% within one week after receiving the copy of b/l)
Product name Aluminum wire Place of origin Shandong, China Payment method T/T, L/C Packaging Standard sea package or as customers' requests
We are selling all type of scrap materials such as Motor scrap,Compressor,Alternator,Insulated copper,Copper wire,Copper millberry,Copper cathode,Aluminum 6063,Alloy Wheel,Aluminum Engine block,Aluminum Cable Wire,Cast Iron ,MOTHER BOARD,BRASS SCRAP HONEY, USED RAILS, HMS 1&2, PET BOTTLES, FRIDGE COMPRESSOR AND AC, ELECTRIC MOTOR,PVC PIPE SCRAP COPPER SCRAP, FLAKES,PET FLAKES,BRASS SCRAP,BATTERY SCRAP,USED TYRES,SHREDDED IRON STEEL â??And More ETC Delivery Time: 19-21 days depending on delivery port.. Payment terms We accept only 30% deposit advance against PI and loading and 70% after BL document copy. Minimum Order MOQ 25 TONS Quantity Capacity : between 1,500 MT up to 3000 MT monthly.
Features : A. Excellent resistance to abrasion and solvent; B. Excellent electricity performance; C. Excellent heat shock, adherence and flexibility; D. high cut through; Main Applications: This kind of polyurethane enameled aluminum wire can be used to make winding wire demanding light material, high electricity conductivity and good heat dispersing performance, especially for the winding wire for transforming high frequency signal, such household appliances as degaussing coil, high frequency transformer, common transformer and small electric motor;
We procure from manufacturers who manufacture wire rods in a continuous casting and rolling process. Electrical conductor (EC) wire rods are used for the production of cables and ACSR and AAC conductors. Alloy wire rods are used to produce AAAC conductors.
Aluminum is the most abundant metal element in the earth's crust, ranking third only to oxygen and silicon. The development of three important industries, aviation, construction and automobile, requires that the material characteristics have the unique properties of aluminum and its alloy, which greatly benefits the production and application of this new metal aluminum. It is widely used. Silvery white light metal. It's malleable. Commodities are often made in rod, sheet, foil, powder, ribbon and filament. An oxide film can be formed in moist air to prevent metal corrosion. The aluminum powder and aluminum foil heat up in the air and burn violently, and emit a blinding white flame. Soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, insoluble in water. The relative density is 2.70. Melting point is 660 â??. The boiling point of 2327 â??. 1.the use of aluminum in the construction industry, because of the stability of aluminum in the air and the excellent appearance after anodizing and is widely used. 2. in the aviation and national defense industry also a large number of aluminum alloy materials. 3. Aluminum cable reinforced by high strength steel wire is commonly used in power transmission. 4. In addition, aluminum and aluminum alloys are widely used in automobile manufacturing, container transportation, daily necessities, household appliances, mechanical equipment and other fields.
Polyester-imide/polyamide-imide Enameled Aluminum Wire Type: EI/AIW/220 Properties: This product provides high heat resistance, high cut through, solvent resistance, radiation resistance, cold resistance, Freon resistance, suitable for high-speed automatic assembly line. UL certificated Application: Suitable for oil-immersed transformers, dry-type transformers, high-temperature transformers, refrigeration compressor motor, sealed motor, explosion-proof motors, electric tools motors, and other high-power motors, etc.
Aluminium wire (Pure Aluminium Wire, Aluminium Line and Spray Finishing Aluminium Wire) ,The surface of aluminium wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application. The product adopts high quality aluminium ingot, no other substances enter the process from raw material (aluminium ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminium wire is guaranteed to be above 99.7%. Specification: Aluminium wire for thermal spray Composition: Al 99.7% Diameter: 1.2-4.75mm Package: 20-150kg/bundle, 7kg/Spool, 50-250kg/barrel (drum) Characters: 1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit. 2. The parent material doesn’t t change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly. 3. The thickness of coating varies in a large range, from several microns to several millimetres. 4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products. Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminium are forbidden. Aluminium segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain. Application Aluminium wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipment’s, etc.
Http://www.Xlpecable.Com/zmscable/cable_392_1.Html. -
