Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Commodity:Avobenzone CAS No. 70356-09-1 Molecular Formula C20H22O3 Molecular Weigh 310.39 EINEC No. 274-581-6 Specification Quality standard: USP36 Appearance Off-white powder Assay 95.0-105.0% Melting range 81.0~86.0 Impurities Any individual impurity: 3.0% The sum of all of the impurities: 4.5% Loss on drying 0.5% Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years. Reference dosage: The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%. Usage: Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin. Application: This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
Technical parameters: Model (ton/furnace)Furnace hearth size (m)Energy consumption (kg/h) 30.14*1.6*2.0150 50.45*2.0*2.4200 80.49 *2.4*3.0200 100.49*2.8*4.5250 120.55*2.8*4.5250 150.55*3.0*5.0300 Technical parameters: Model (ton/furnace)Furnace hearth size (m)Energy consumption (kg/h) 30.14*1.6*2.0150 50.45*2.0*2.4200 80.49 *2.4*3.0200 100.49*2.8*4.5250 120.55*2.8*4.5250 150.55*3.0*5.0300
Foshan metech aluminium technology co., ltd is a professional manufacturer, exporter and supplier of the full aluminium industry equipments and machinery, such as aluminium melting furnaces, aluminium holding furnaces, continuous casting and rolling machines, coal gasifier, aluminium dross processing machines , permanent magnet stirrer ect. We could offer all kinds of melting furnaces with different capacity (from 3 ton to 100 ton), different type ( regenerative furnace, reverberatory oven, tilting or stationary) , different shape( round, rectangular or vertical), different fuel ( oil fired, gas fired, electricity power ) etc. Different application (aluminum ingot, aluminum billite, recycling aluminum, aluminum scrap , wire and cable) etc.In a world, we could degsign and make the melting furnace according to your condition and need. So please tell me your detail conditions. The raw materials, daily outptu capacity, finished products etc. Aluminum melting furnaces, tilting aluminum melting furnaces, oil fired melting furnaces, industrial furnaces, stationary furnaces, twin-chamber furnaces, vertical furnace. Wooden box in containner.
This furnace adopts electromagnetic induction smelting, the structure is very simple, does not need to do the foundation. Cooling method can be water cooling or air cooling. The furnace body is tilted by a reducer, which can be tilted manually when power is cut off. The noise meets the environmental protection standard and is less than 60 decibels.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Equipment Composition: (1) Power Supply: 1) VIP Power Cabinet 2) DC Smoonthing Reactor 3) Filter Compensation Capacitor 4) Furnace Tilting Control Box. (2) Furnace 1) Aluminum Alloy Shell 2) Inductor 3) Reduction Gear 4) Furnace Suport Shelf 5) Water Cooled Cable 6) Crucible Module (3) Closed Water Cooling System 1) Cooling Power Supply 2) Cooling Furnace.
Rice, grains, canned food, nutella, chocolates, nido milk powder, electronic scrap, sweets, candy, milk powder, milk, vegetables, beef meat, chicken, frozen chicken, chicken feet, chicken paws, sunflower oil, eggs, coffee, tea, spices, condiments, confectionery, fruits, a4 copy paper, cream chargers, wood pellets, beauty products, cosmetics, shaving products, perfumes, baby products, mineral water, natural water, detergents, personal care, oral care, medical gloves, face masks, energy drinks, swimming pool container, contact lenses, dyson products, nivea, dove, axe, rexona, ice tea, tea yellow label, pampers, pringles, deodorant, body lotion, shower gel, la prairie, sugar, non lme copper cathode, copper wire scrap (millberry), copper ingot, copper concentrate, used rail, aluminum wire scrap, hms, metal scrap, aluminum ingot.Logistic
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Foundry coke is a high-quality grade of coke, also known as hard coal. Coke is majorly used for efficient cupolas for melting iron and other metals such as lead, copper, zinc, tin, etc. in cupola furnace foundries.
Used battery scrap, lead plates, lead sheets, hms 1&2,heavy melting steel scrap,copper scrap,ubc cans,tandem grade,aluminum extrusions,ss scrap etc.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
KN95 New US$ 0.455 - 2.58 / Piece 10000 Pieces Minimum Order : 3 - 30 days Product Details Model Number : KN95 Protective Mask-#5340 Brand Name : WinHealth (Future) Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: KN95 Particulate Respirator CE FDA Certificate Over 95% effectiveness in filtering non-oil particles Product Introduction KN95 masks have over 95% effectiveness in filtering non-oil particles. For use primarily for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances. The inner and outer covers of KN95 masks are constructed from spunbond nonwoven fabric. Polypropylene melt-blown nonwoven is layered between the inner and outer covers. The ear loops are made of polyester elastic which is attached to the mask. The inside nosepiece is a polypropylene or PU foam. Product Specifications Product Size Specification and Appearance Requirements Product Appearance and Materials Specifications of KN95 Mask NameParameter Product name - KN95 Particulate Respirator Material - Spunbond nonwovens, melt-blown nonwovens, hot air cotton, nose clip, elastic ear loops Model - Foldable Size - 110 mm*160 mm /4.33in.*6.30in. Product application scope and purposeMainly used for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances. Expiration date - 3 years after production Packaging specification - 2pcs/bag; 50pcs/box; 1000pcs/Carton Usage instructions1. Hold the ear loops in both hands with the metallic strip up. 2. Put the mask against your face covering both nose and mouth. Place ear loops around both ears. 3. Adjust mask over nose and under chin. 4. Adjust the flexible strip over bridge of nose. 5. Make sure the mask fits properly, covering the nose, mouth and chin. StorageStore in a cool, dry, clean place away from fire. Store between -20â?? and 38 (-4 F and 100 F) with relative humidity below 80 % Standards KN95 mask complies with the national standard GB2626-2006 CE FDA Certificate Self-Priming, Filter-Type Mask for Respiratory Protection. This standard specifies the technical requirements, testing methods and manufacturing procedures of the mask.
Hot Selling Aluminium Ingot A7 99.7% & A8 99.8% best Price Aluminium Ingot A7 99.7% And A8 99.8%. Once the aluminum scrap is collected and sorted, it is placed into a melting furnace and turned into molten aluminum at temperatures ranging from 1300 to 1400 degrees Fahrenheit. This molten aluminum cast into large slabs called ingots or billets. And since aluminum never loses its performance or strength during the recycling process, the same piece of aluminum can enter the secondary production process time and time again, multiplying the cost savings and environmental benefits. Not only does secondary aluminum production use less energy, it reduces landfill waste, contributes much lower greenhouse gas emissions and greatly reduces costly international transportation.
Aluminum oxide Alumina powder for Electric vacuum tube shell ceramic Al2O3 item value Classification ALUMINA CAS No. 1344-28-1 Other Names Alumina MF Al2O3 EINECS No. 215-691-6 Grade Standard Electron Grade, Industrial Grade, Reagent Grade Purity 99.5% Appearance White powder Application electronic ceramics Color White Grade Industrail Grade Density 3.5 g/cm3 Melting point 2054 Boiling Point 2980 Molecular Weight 101.96 Shape Ionische Water Solubility Hard Packing 25 Kg Pp Bag or plastic barrel Sample Availiable
Applications: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap Aluminum block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc. Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Features: Free from Nuts, Steel plate, paint Chemical Composition: AL Appearance: Silvery White
Factory cheap 99.99% purity bulk aluminum wire scrap for sale Key Specifications/Special Features: Aluminum Scrap Density: 2.702g/cm Melting point: 660.37'C Boiling point: 2467.0C Color: silver white ITEM VALUE RESULT(%) Al Margin 98.32%
