RC helicopter.
Flymentor 3d is a stabilization unit that not only stabilizes the rc helicopter against external inputs such as wind turbulence, but will also hold the helicopter in position. The flymentor uses both gyros and and a ccd imaging device to help stabilize the helicopter. The gyros stabilize orientation and the ccd holds position with respect to the ground. Let go of the controls and the flymentor will upright your helicopter (of course within reasonable limits!). This system has multiple applications from stabilizing your aerial photography platform to acting as an electronic insurance policy when you¡¯re learning to fly better. - kds flymentor 3d x 1 set
Product description features: 1). Blue plastic crust 2). Pom gear 3). Applications: micro planes, hand launch gliders, small electrics helicopters Specifications: 1). Supply voltage: 4.8~6.0v 2). Speed: 0.12sec/60o (no load running) 3). Torque: 0.6kg. Cm 4). Operating current: 100ma 5). Static current: 1ma 6). Dead band drain: 10uses 7). Connector wire length: 165mm 8). Dimensions (l * w * h): 20.0 * 19.6 * 8.0mm 9). Weight: 4.4g(less connector) 10). Connector: JR and jst plug Plastic package or color box
Specification: (1).Standard voltage ¦dc 4.8v/6.0v (2).Pwm input range:pulse cycle 20+1ms, positive pulse 12ms (3).Speed¦0.09s/60¿ (4).Torque: 1.3kg/cm(vcc=4.8v) (5).Max corner ¦150¿ (6).Operation temperature: -20-75 (7).Weight:7.5g (8).Dimensions:22.8*11.5*20.8mm (9).Color:black Plastic package or color box
Specification: (1).Standard voltage¦dc 4.8v/6.0v (2).Pwm input range:pulse cycle 20+1ms, positive pulse 12ms (3).Speed ¦0.09s/60¿ (4).Torque:p1.5kg/cm(vcc=4.8v) (5).Max corner¦150¿ (6).Operation temperature: -20-75 (7).Weight:8.3g (8).Dimensions:22.8*11.5*20.8mm (9).Color:blue Plastic package or color box
Specification: (1).Standard voltagedc 4.8v/6.0v (2).Pwm input range:pulse cycle 20+1ms, positive pulse 12ms (3).Speed0.1s/60¿ (4).Torque:p1.7kg/cm(vcc=4.8v) (5).Max corner150¿ (6).Operation temperature: -20-75 (7).Weight:9g (8).Dimensions:22.8*11.6*21.0mm (9).Color:blue Plastic package or color box
[Function] Up/down, forward/backward, left/right - With a built-in gyroscope system - Flash lights - Indoor flight [Product features] - With a intelligent control system - 360 degree accurate positioning, the built-in gyroscope can make the helicopter accurate positioning and stable flying. - Smooth impending and easy hovering - The flash lights make it fun to fly in the night. [box size]61*25*10cm.
Features: V2 Head Rotor Set (4mm Shaft) V2 Tail Rotor Set Auto-Rotation System Rear Tail Servo Mount Collective Pitch System Tail Rotor Drive Belt System Main Drive Gear with Cooling Fan Professional Servo Control Lever Design Specification: Length:650mm Height:230mm Main Rotor:700mm Tail Rotor:150mm Motor Gear:13T/11T Main Gear:150T Autorotation Tail Drive Gear:106T Tail Drive Gear:25T Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24 Weight(without power system):354g Weight(including power system):690g Package included: 450S V2-01 Kit ONLY (95% Assembled without electric parts) x 1
Features: -Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter . Product Details: -Weightú¦25g -Sizeú¦36*15.2*29mm -Speed ú¦4.8V: 0.10sec/60íp -Speed ú¦6V: 0.07sec/60íp -Stall Torque ú¦4.8V: 2.0 kg/cm -Stall Torque ú¦6V: 2.2 kg/cm -Operating Voltageú¦4.8-6Volts -Tail Lock.
Features: -Futaba, JR, Sanwa and Hitec compatible. for 450/500 Helicopter. Product Details: -Weightú¦25g -Sizeú¦36*15.2*29mm -Speed ú¦4.8V: 0.09sec/60íp -Speed ú¦6V: 0.07sec/60íp -Stall Torque ú¦4.8V: 2.0 kg/cm -Stall Torque ú¦6V: 2.2 kg/cm -Operating Voltageú¦4.8-6Volts - Head Lock.
RC helicopter & compound rubber.Logistics
Rc toys, model toys, rc helicopter.
Servo Features: 1. Various data feedback: voltage, current, temperture and location. 2.Multiple control mode: PWM/TTL/RS422/RS485/CAN/UART 3. High efficiency and long-lived brushless motor 4. 32-bit microcontroller, high-resolution(4096) magnetic encoder potentiometer, never wear. 5. Over-load current protection 6. CNC aluminum alloy case, good for heat dissipation. 7. Metal gear, Titanium alloy gear 8. Stroke angle can be customized below 360 degrees.
Digital micro servo The new pdi-1092 ic servo is a new improvement over the previous pdi-1091. The updates to the servo include, hardened gear pins, more rigid servo case, new stronger motor for better holding power. Hybrid gears and ic programming can also be set via pc interface or hand held programmer (not included). Speed: 0.08 sec @ 60deg Torque: 27.75 oz-in (2.0kg-cm) Blunk , box
2.4g 4ch 4-rotors rc helicopter epp material for damage protection f22 Product size: 35*26*10 cm Specifications: Function: 4ch. Upward/downward, left/right, forward/backward; side flight; Frequency: 2.4ghz; Battery for helicopter: 3.7v 500mah lithium battery included; Battery for transmitter: 6*aa battery not included; Recharging time: about 30 minutes; Flight time: 5-6 minutes; Remote control distance: about 30 meters; Color: black; Test reports: en71, en62115, rohs, emc, r&tte, 6p, astm, hr4040¡¡ Package including: 1 * fighter 1 * 2.4g transmitter 1 * usb charge cable 1 * screwdriver 1 * usb adaptor 1* charger box 1 * instruction manual Colorbox: 48*37.5*12 cm 12pcs in one carton Carton size: 79*52*79 cm G.W.: 15.5kg
(201.4 oz-in)14.5kg.Cm.At(4.8v) the features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. - -
Name:6v20kg-cm digital servo; Size :40.2mm 20.1mm 38.8mm 48.0mm 10mm; weight:56g 0.2(1.46oz); Gear type:titanium gear; speed:0.13sec/60o at (6v) (238.9 oz-in)17.2kg.Cm.At(4.8v) The features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. -
For CNC, textile machine, printing machine, packaging machine, we usually use more than 1 motor in 1 machine. But the common servo drive in the market can only run 1 servo motor. Therefore we need such a servo drive which can run 2 motors together. Now it is launched. Whats more, it will save your cost and mounting space sharply! Its very suitable for CNC lathe machine, or other 2-axis machine. HSV-162A uses the latest Digital Signal Processor (DSP) for motion control, Complex Programmable Logic Device (CPLD), and Intelligent Power Module (IPM). It features small size, easy installation, and easy commissioning. HSV-162A takes full use of processing chips and saves installation space. It is the preferred feed drive for your economical CNC machines. Five control modes: Full state display capability Alarm memory capability Customized input and output signal Wide range of speed regulation ratio Integration of main circuit and the input power supply of the control circuit Small size and easy installation AC servo drives and motors- Which is compatible with SIEMENS, FAGOR CNC controller, and all the types of PLC. Dual-motor servo system Its very suitable for CNC lathe machine, or other 2-axis machine, save much cost. Servo system for AC380V power input lower current, and higher torque, free of transformer. Standard packaging.
Name6v40kg-cm digital servo; Size :a60.1mm b30.1mm c59.7mm d68.5mm e16.9mm; weight:177.5g6.25oz; Gear type:metal gear; Speed:0.20sec/60⺠at (6v) 0.18sec/60⺠at (7.2v) Torque:(465 oz-in)33.5kg.Cm.At(6v) (553 oz-in)39.8kg.Cm.At(7.2v) Features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. -
Name6v25kg-cm digital servo; Size :a40.2mm b20.1mm c38.8mm d48.0mm e10mm; weight:57.5g â±0.2(1.46oz); Gear type:titanium gear; Speed:0.16sec/60⺠at (6v) 0.18sec/60â° at (4.8v) Torque:(347.2 oz-in)25kg.Cm.At(6v) (291.7 oz-in)21kg.Cm.At(4.8v) Features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. -
