2Mm Thickness Colour Upvc 3 Layer Roofing Sheet Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572

JHG pattern glass is widely used in cabinets, windows and doors. and also we also can offer you finished products with cut, polished, tempered, laminated, acid etched. JHG pattern glass� is a kind of decorative translucent glass with embossed patterns on one or both surfaces. Pattern glass is generally used where privacy or obscurity is desired but light transmission is still important. With the special property of decoration, patterned glass can allow light to pass through, at the same time, it can also prevent clear view. Usually it transmits only slightly less light than clear glass.JHG pattern glass is widely used in cabinets, windows and doors .and also we also can offer you finished products with cut� ,� polished, tempered , laminated, acid etched . Max size :2000X3660MM Thickness :3-10mm Colour : clear/ bronze/blue/green/ grey

JHG is professionally offering all various of high quality laminated glass: 1) PVB laminated glass Colour includes clear/milk/bronze/grey/blue/green/black PVB film thickness is 0.38/0.76/1.14mm or thicker Both standard size and customized sizes available 2)Sentryglass Plus(SGP)laminated glass SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker mainly used for glass floor,glass step,glass fin,curtain wall Max size is 18000mm length 3)EVA laminated glass It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.

Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize

Product Name Carbon steel plate 25crmo4 alloy steel sheet price Thickness 3mm~300mm,2mm-100mm is common thickness,also can customize Width 1000~3000mm,common width is 1250mm,1500mm,2000mm,2200mm Length 1000~12000mm,can as your request cut Surface Clean,finished, blasting and painting or as your request Delivery Hot Rolled, Controlled Rolling,Normalizing,Annealing, Tempering,Quanching, Q+T Packing Steel Strapping,fixing in the Container,can customize

Product Name Hot rolled steel sheet Thickness plate:0.35-200mm strip:1.2-25mm Length 1.2m-12m or according to customer's special request width 610,760,840,900,914,1000,1200,1250mm Tolerance Thickness: +/-0.02mm, Width:+/-2mm Material grade Q195 Q215 Q235 Q345 SS490 SM400 SM490 SPHC SPHD SPHE SPHF SEA1002 SEA1006 SEA1008 SEA1010 S25C S35C S45C 65Mn SPHT1 SPHT2 SPH3 SPH4 QstE Others as your requirement surface iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface

Product name - Steel Grating Finish - Hot galvanized ,Paint, Untreatment (black/slef color) Weld way Automatic pressure resistance welding Usage - Industrial platform, Corridor laying, Ditch cover plate, Fence, etc Thickness - 3-10mm Bearing bar pitch - 20mm 30mm 40mm Cross bar pitch - 50mm 100mm Style - Plain sheet, Serrated sheet, I type sheet

We are INDONESIA Solid Wooden Panels Doors & Door Frames Manufacturer Made from Vary wood species : Red Meranti - Mahogany - Acacia - Bangkirai ## also can be PRIME WHITE All sizes available by demand Loading 20ft = 400 pcs ***** Price range usd 70 /sheet FOB Indonesia main port for Solid Wooden Panels Door ### Sizes by demand ## We also making 3 layers Solid or Finger Jointed Laminated Door frames or Door Jamb PRICE RANGE FOB Indonesia main port USD 890 /CBM ##### Payment By Deposit Bank transfer or L/C at sight

paper soup cups Grammage - 150-320gsm Size - Regular: roll width 500-1200mm, sheet size 787*1092mm, or 889*1194mm 1. High-quality virgin bamboo,food grade and Eco-friendly paper 2.Good thickness,high stiffness, good flexibility and high smoothness ,good printing effect. 3. Base paper: 150gsm-320gsm Paper cup fans: 3oz-22oz

Indonesia Wood Working Manufacturer ***** Produce Bangkirai / Yellow Balau anti slip out door Decking Or Indoor Flooring ***** common size : Thick 19mm / 20mm x 90mm /120mm x 1200mm up to 4.000 mm or any size by demand ***** Minimum quantity 20 cbm in 20ft container ***** Price range depend on products and start from usd 290/cbm FOB Jakarta Indonesia Port to usd 690 / cbm *** Also making MERANTI 3 layers finger joint or Solid Door Jamb or Door Frames ***** Common size 72 mm x 86 mm up to 4.000 mm ***** ****** Price Range FOB Indonesia Port usd 590 /cbm Payment By Negotiation with Bank transfer only and we do not accept L/C , Please note !!! ***** Market oriented : World wide

Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper

Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper

Code 17210: Reduced thickness for maximum sensitivity suitable for microsurgery operations Features 1. Triple-layer design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfect Color: Brown Hand former: Anatomic shape, non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile Size 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 310 +/- 5mm

Code 18210: Increased thickness for maximum protection suitable for orthopedic surgeries Features 1. Triple-layer design consists of double-dipping latex technology and polymer coating. 2. Made by natural rubber latex with low protein content. 3. Excellent hand-fitting made by perfect Color: Brown Hand former: Anatomic shape, non-beaded cuff, textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Sizeï¼? 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Overall length: 310 +/- 5mm

PRODUCT INFO Langsat fruits are small to medium in size, averaging 3-7 centimeters in diameter, and are round to slightly oval in shape, growing in large clusters of approximately ten fruits. The thick rind is hard, leathery, and tan to pale yellow, developing brown spots and blemishes as the fruit matures. The rind is also covered in fine hairs giving the fruit a fuzzy appearance. Underneath the surface, there is a white, spongy, and very bitter layer that is easily separated and peeled, and the flesh is thick, translucent-white, and is typically divided into 1-5 segments. These segments are juicy, tender, and soft with a texture similar to grapes, and the flesh may be seedless or contain a few bitter seeds. Langsat fruits are very sour when young, but as they mature, the fruits develop a sweet-tart flavor with light acidity, reminiscent of grapefruit and pomelo. Langsat is an excellent source of vitamins A, B, C, and E, fiber, and also contains some iron, phosphorus, potassium, and calcium. USES Langsat is best suited for raw applications as its sweet and tangy flavor is showcased when consumed fresh, out-of-hand. The rind is easily peeled and removed from the flesh, and the segments can be consumed whole, discarding the small bitter seed. Langsat can be served as a snack or as a fresh dessert. It is also commonly segmented and mixed into fruit salads, green salads, juiced or blended into fruit drinks, or coated in syrups for a sweeter flavor to add to ice cream, desserts, and pastries. In addition to fresh preparations, Langsat can be combined into sauces, jams, and jellies for a sweet-tart preserve. Duku pairs well with other tropical fruits such as snake fruit, lychee, and rambutan, mint, basil, and cilantro. The fruits will keep for 3-4 days at room temperature and up to one week when stored in the refrigerator. SEASON Langsat fruits are available year-round in Southeast Asia, with a peak season in the fall through early winter.

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 -12 m (32- 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - 1.5 cm (1/2) long and 2.0 cm (3/4) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 -25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20 - 45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm' s reach.

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 - 12 m (32 - 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - 1.5 cm (1/2) long and 2.0 cm (3/4) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 - 25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20â??45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm's reach.

M. oleifera is a fast-growing, deciduous tree that can reach a height of 10 - 12 m (32 - 40 ft) and trunk diameter of 45 cm (1.5 ft). The bark has a whitish-grey colour and is surrounded by thick cork. Young shoots have purplish or greenish-white, hairy bark. The tree has an open crown of drooping, fragile branches and the leaves build up a feathery foliage of tripinnate leaves. The flowers are fragrant and hermaphroditic, surrounded by five unequal, thinly veined, yellowish-white petals. The flowers are about 1.0 - .5 cm (1/2) long and 2.0 cm (3/4 ) broad. They grow on slender, hairy stalks in spreading or drooping flower clusters which have a length of 10 - 25 cm. Flowering begins within the first six months after planting. In seasonally cool regions, flowering only occurs once a year between April and June. In more constant seasonal temperatures and with constant rainfall, flowering can happen twice or even all year-round. The fruit is a hanging, three-sided brown capsule of 20â??45 cm size which holds dark brown, globular seeds with a diameter around 1 cm. The seeds have three whitish papery wings and are dispersed by wind and water. In cultivation, it is often cut back annually to 1 - 2 m (3 - 6 ft) and allowed to regrow so the pods and leaves remain within arm's reach.