CRT-310 series are motor card reader/writer equipments of magnetic /IC/RF ID card with funcition of motor front / rear insert/eject. Features. EMV certified IC/RF ID card read/write. Mag card read only,SAM slot option Insert/eject from front/rear side. 390*290*292CM/12PCS
Card reader Four flash memory slots offering simultaneous read and write capabilities, bootable Feature, and hot-swapping (inserts or removes flash memory card without turning off the system) One front panel 2.0 ports for easy front panel access. Offering high-speed data transfer rate of up to 480mbps Backward compatible with usb 1.1 specification Two (2) front panel diagnostic led lights Designed for standard 5.25 drive bay Driver required for win95/98/2000/nt Cards type supported by 9 in 1 card reader: cf i/ii, sm, sd, mc, ms, msp, md, mini sd card Cards type supported by 12 in 1 card reader:cf i/ii , sm, sd, mc, ms, msp, md, mini sd, memory stick, memory stick pro, memory stick duo card Cards type supported by 18 in 1 card reader:cf i//i, ibm microdrive, sm, sd, msp, mini sd, t-flash, mmc-ii, rs-mmc, memory stick, memory stick pro, memory stick duo, memory stick magic gate pro, memory stick mag General specification Compatible with windows xp, 2000, me, 98, 98se Compliant with usb2.0 specification Compliant with usb1.1 specification Supports pci-bus power management interface 1.1 specification Supports 1.5/12/480 mbps data transfer rate Support Compact flash type i Compact flash type ii Ibm microdrive Sd Mini sd T-flash card Smart media Mmc Mmc-ii Rs-mmc Memory stick Memory stick pro Memory stick duo Memory stick pro duo Memory stick magicgate Memory stick magicgate puo Memory stick magicgate duo Xd Packing list (lxwxl) 55cm*40cm*30cm G.Wú¿kgú¬ 12kg N.Wú¿kgú¬ 11kg Q'ty 100pcs Packing blister packing 1, usb cable*1
Card reader Features: Usb2.0 all in 1 card reader More features: Four flash memory slots offering simultaneous read and write capabilities, bootable Feature, and hot-swapping (inserts or removes flash memory card without turning off the system) One front panel 2.0 ports for easy front panel access. Offering high-speed data transfer rate of up to 480mbps Backward compatible with usb 1.1 specification Two (2) front panel diagnostic led lights Designed for standard 5.25 drive bay Driver required for win95/98/2000/nt Cards type supported by 9 in 1 card reader: cf i/ii, sm, sd, mc, ms, msp, md, mini sd card Cards type supported by 12 in 1 card reader:cf i/ii , sm, sd, mc, ms, msp, md, mini sd, memory stick, memory stick pro, memory stick duo card Cards type supported by 18 in 1 card reader:cf i//i, ibm microdrive, sm, sd, msp, mini sd, t-flash, mmc-ii, rs-mmc, memory stick, memory stick pro, memory stick duo, memory stick magic gate pro, memory stick mag General specification Compatible with windows xp, 2000, me, 98, 98se Compliant with usb2.0 specification Compliant with usb1.1 specification Supports pci-bus power management interface 1.1 specification Supports 1.5/12/480 mbps data transfer rate Support Compact flash type i Compact flash type ii Ibm microdrive Sd Mini sd T-flash card Smart media Mmc Mmc-ii Rs-mmc Memory stick Memory stick pro Memory stick duo Memory stick pro duo Memory stick magicgate Memory stick magicgate puo Memory stick magicgate duo Xd Pvc packing
Provide usb 2.0 interface fully backward compatibility with usb1.1 devices. Support high-speed data transfer rate up to 480mbps. Support bus-powered, no external power required. Four media slot can be used at the same for data exchanges. Low power consumption. Support firewire (ieee 1394) With sata and sata power port Support the hd audio input/output With 2 hub ports
High speed usb 2.0, compatible with usb1.1 Plug and play hot swapping, easy to insall and use High speed data transmission, read up to 16mb/sec., write up to 8 mb/sec. Power supply by usb port directly Single card reader, slim size, easy for carry
High speed usb 2.0, compatible with usb1.1 Plug and play hot swapping, easy to insall and use High speed data transmission, read up to 16mb/sec., write up to 8 mb/sec. Power supply by usb port directly Single card reader, slim size, easy for carry Rope hole for hang Weight:12g Size:32.5*15.5*7.5mm
Card reader Compliant with usb specification version 1.1/2.0 Transfer rate: up to 480mbps. Can fast look through and edit files directly in the flash Easy taking, download and upload The power needed for flash supported through usb Support hot swapped Operating temperature: 0~70 Stock temperature: 10~90 Humidity: 10%~90% non-condensin Blister packing
1)Material: PVC, PET, ABS or envrionmental plastic 2)Card size: 85.5*54*0.76mm (standard), or according to your request. 3)Thickness:ISO standard 0.76MM,0.6MM,0.5MM,0.3MM 4)Printing Method: Four colors offset printing, silk-screen printing, digital printing 5)Craft available option: magnetic strip,barcode,embossing number, signature panel, Pin number 6)Chip available: Philips Misfire 1K S50,S70,SLE4442,SLE4428,SLF5528,Simens ceries,Temic series, AT24C16, AT24C64, AT series, FuDan Series,EM4100,TK4100, etc Packaging: 250pcs/box, 20boxes/caton, box size: 22.5*9.3*6cm, carton size: 13*23.5*50cm Weighty: 1000pcs 5.4KG, 5000pcs 27KG.
Unlike contact cards,Contactless smart cards apply an embedded antenna that is attached to the chip to transfer information stored in the chip's memory to a remote computer. Contactless cards do not have to be inserted into a card acceptor device. They need only be delivered within range of a radio frequency acceptor to read and store information in the chip. The operation range is normally from about 2.5" to 3.9" (63.5mm to 99.06mm) .
RFID cards 1. Material: PVC 2. Specification: 85.5x54x0.85-0.9mm 3. Chip available: TK4100 4. Crafts: Ink-jet number, 5. Reading distance: 8-20cm 6. Application: Door access control, Transportation, Time attendance system. Electric ticket, membership management, Card parking, Express way toll gate, Electic payment, Anti-theft, Identification 7. Package: Inner packing: 200PCS/inner box Outer packing: 5000PCS/carton Carton size: 23*30*48cm . Specification: 85.5x54x0.85-0.9mm.
Contactless card is also called rf(radio-wave frequency) card. Our contactless card has adopted the most advanced american ait process. The core of ait technology is inlay embedding and module welding. The inlay is embedded into the pvc sheet accurately by ultrasonic measurement and then the module and the inlay are welded within nitrogen gas surrounding. Signature applications of thermal rewrite card:
Model number Rl-r49 Size 220*140*70mm Rf output 20-30dbm Chip Impinj indy r2000 Frequency Uhf 865-868mhz, 902-928mhz Work model Fhss or fixed frequency Power consumption
Long range, special for large area facility or building Model ak-fr001 This allink 4 port long range fixed uhf rfid reader, it¡¡¥s developed base on impinj r2000 project, multiple mission and better function of anti-interference, adopt special format to reduce noise¡ê¬ rssi is more stable and reliable, so easier to read. This reader is used in many kinds of area, such as warehouse, asset tracking, intelligent transportation, security, and etc. Features: Comply with protocol epc c1 gen2/iso 18000-6c Powerpc format cpu mpc8308, ram 128m Function of carrier wave elimination, better capacity of anti-inteference Support drm reading More sensitive, longer range reading With 4 port for uhf rfid antenna Tag reading speed could reach 640kbps Setting is flexible, to read maximun quantity of tags, so could meet different working condition Specification: Chip: phy: impinj r2000, mac: at91sam7s-256 Protocol: epc c1 gen 2, iso18000-6c Dense reader mode management: software setting, automatic event trigger and events management Frequency: from 840 to 960mhz (adjustable) Type of modulation: fhss or fixed frequency (adjustable) Capacity: +10 to +32.5dbm Type of antenna: 4 port of tnc connector single polariztion antenna. Size: 260mm x 210mm x 43mm Weight: 2.5kg Installing way: fixed by steel frame Power supply: dc24v, 2a Power consumpation: 30w (normally) Processor: freescale mpc8308 Memory: 128mb Flash: 8mb+256mb (optional) System: linux Development interlace: binary stream, c/c#/c++ Communication port: ethernet 10/100m base-t (rj-45), 2 pieces of rs232, one for testing. Gpio 4 pieces of input port and 4 pieces of output port. (optical coupling isolation¡ê© Working condition: humidity 10-85%, no dew trop. Working temperature from -20¡ãc to 55¡ãc, stock temperature from -45¡ãc to 85¡ãc, waterproof class is ip53. 2.5kg/pc
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
134.2 khz wand reader with bluetooh, easily communicates with all pda's and laptops via bluetooth. Easily communicates with most popular scales. Iso compliant reader, reads all popular hdx, fdx-b and industrial hdx tags. Allflex, destron, digital angel, zee tags, reyflex, y-tex Dem weight for master carton is 63.00 lbs (10 readers)
Applications of RFID Cards are distributed in identification, access control, supply chain, inventory tracking, vehicle fees, security, producing control, and asset management, especially on pets. Passive RFID Cards can operate in the low frequency (LF), high frequency (HF) and ultra-high frequency (UHF) radio bands. These three frequencies are ok for us. RFID Cards have adequate security. Because RFID carries the electronic information, and the content of data vias a password to protect, so that its contents can not easily be forged and altered. If you want more information, or order related products, please feel free to contact us, we have the best quality products and
>> RFID Card >> LF card 125 KHz cards also is called Low frequency cards. They are widely used with its low price and simple operation.hey are commonly used in application such as access control and payment cards staff identification ect. Oprfid.com provide a range of different 125KHz cards. EM and TK (EM compatible) are very popular all round the world. lf card Low cost LF 125KHz only read chip card and ISO11784/11785 LF RW card. Available LF Chip - TK4100, EM4102, EM4200 - ATA5577, - EM4450, EM4305 - Hitag 1, Hitag 2, Hitag S 256, Hitag S 2048 LF card Key Feature - Dimensions: CR80 85.60 x 53.98mm - Thickness: 0.84mm - Material: PVC, PET, PC, PET-G etc - Card Surface: Matt/ glossy finish - Housing: Lamination - Working Frequency: 125KhzHz Printing Option - Offset Printing - Silkscreen Printing - Metallic Gold/Silver Personalization: - Hole punching, Embossed, Hologram - Hot-Stamping silver/gold, - Magnetic stirp, LoCo 300oe, 650oe, HiCo 2750oe, 4000oe - Thermal print number/barcode - Inkjet print number/barcode - UV inkjet print number/Barcodes - Laser print number - Scratch off Application - Access Control - Attendance Management - Automated Parking Management. - Supply chain management - Asset tracking - Container identification - Customer loyalty programs Low Frequency (LF) RFID is a band on the radio frequency spectrum that typically operates between 125 kHz and 134 kHz. Technically, LF applications can operate on a larger bandwidth from 30 kHz to 300 kHz; however, the specific band varies from country to country and depends on frequencies set aside for radio and marine life tracking. LF RFID communicates in a similar fashion to HF/NFC RFID in that it uses electromagnetic coupling to send and receive signals. Below are a few facts about LF RFID: 1:Only small amounts of data can be stored on the tags. 2:LF tags are typically smaller than other types of RFID tags. 3:LF systems have shorter read ranges than both HF and UHF RFID. 4:LF tags are able to operate around liquid or metal items. 5:LF tags require less energy to operate. 6:The main application for LF RFID is animal tracking.
IVF-RH101 reader elf is a portable mini reader that can link with ios, android, wp etc, Intelligent system platform through 3.5mm headphone jack to use. It has the characteristic of plug-and-play, light and small size, low power consumption, built-in rechargeable battery, etc, and is easy to carry, truly make mobile identify tag at any time, anywhere, as you wishes. It¡¯s applicable to anti-counterfeiting terminal device, etc parameter specification: 1).Support high frequency (HF) label agreement 2).Support ios, android, wp, etc Intelligent system platform 3). Material: ABS + PC engineering plastic 4). Weight: 12 g 5). Battery capacity: 130 ma 6). charge modeMicro USB 5V/0.5A 7). operating ambient temperature: -20~60 8). indicator light condition: Normal work: green light for long Abnormal equipment: light not on Low electricity quantity: green light flashing(Slow flash: low power alarm; Flash: stop using low electricity) Charging: red light for long charge complete: green light for long 9) Communication interface: 3.5mm audio interface (Ordinary headphone jack) Size: 39mm*30mm*11mm
