1.Product Description Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. 2.Technical Parameters Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter Number of Network Ports1 channel Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter Transmission Rateself-adaptive 10/100/1000M Protocol supportedIEEE802.3/IEEE802.3U etc. Fiber TypeSingle Fiber Optic modeSingle Mode Transmission modehalf / full duplex Overall Power
1.Introduction 10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks. 2.Features In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX Supported Ports: SC for optical fiber; RJ45 for twisted pair Auto-adaptation rate and full/half-duplex mode supported at twisted pair port Auto MDI/MDIX supported without need of cable selection Up to 6 LEDs for status indication of optical power port and UTP port External and built-in DC power supplies provided 128 K's data buffer RAM Support for low-delay time pure data transmission and full/half-duplex flow control. Built-in watch-dog timer to monitor any error in internal data exchange
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported Plug-and-Play installation Support Jumbo frame (64-9216 Byte) Support Voltage Monitor Support full/half duplex auto-negotiation Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX Description: 10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM. 10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. Export standard packaging
Product name: 10/100m fiber media converter Single fiber Product intro: The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status. Main features: Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol. With the function of automatic recovery to prevent system halt. Indicate the working status. Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current. Optional inside and outside power supply. No adjust electrical and optical environment. Led indicator light shows the working performance status. Duplex mode: Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol. Inserting to 14 slots rack with play and plug. Led status indicator light makes easy diagnosing network and checking troubleshooting. Good flow control and reset fuction prevent system halt. Transmission distance: Mm(multi mode): within 2 km Sm(single mode):20km, 40km, 60km, 80km, .100km Single fiber 1310/1550 wdm Environment parameters: Working temperature: 0íµí½65íµ Storage temperature: -40íµí½+85íµ Humidity: 5%í½90% Other parameters: Inside power supply dimesion: 160mm*110mm*30mm Outside power supply dimesion: 110mm*70mm*30mm Rated voltage: ac220v/50hz Inside power supply: ac 220v/1a Inside power supply: dc 5v/1a
Technical parameter 1. According with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE802.3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is 256K. 7. Support electricity port's 1000M mode or self-adapt mode's switch. 8. Support state indicator, external power(output 5V~50Hz 1A) 9. Interface: Electricity port: RJ-45 fiber: SC 10. Twisted-pair: Cat. 5 Cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0~50 degree 13. Storage temperature: -20~70 degree 14. Humidity: 5%~90% 15. Size: 32*128*158mm (H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelength: 1310/1550nm Typical distance: 20KM Min TX PWR: -6.0dBm Max TX PWR: 0.0dBm Sensitivity: < -22dBm Link budget: 16.0dBm Size: 32*128*158mm (H*W*L) 1KG/pair
10/100 MBPS managed media converter Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. Hardware Function Support 10Base-T, 100Base-TX, 100Base-FX Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards Up to 5km distance on multi mode optical port and 120km distance on single mode optical port High-performance auto-negotiation chips make sure the data transfer with higher Security, stability and without block. Up to 1916 bytes package forwarded Support half/full duplex mode Auto-negotiate Low power consumption, low heat generation and excellent compatibility 10Watt professional communication power supply module inside the standalone. Chassis supports double redundant power supply modules and each power supply module Supports up to 100 Watt power output for the security and stability Support hot-swap for all the modules, but not including management module Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable. Device Size Standalone: 132mm (width)*36mm (depth)*122mm (height) 19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)
Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm
Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available
HTFuture dual fiber Fiber Media Converter (Electric To Optic Converter) is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet. The media converter is connected between Fiber cable and Twisted cable segments with network operating smoothly. The Ethernet transmission distance of 100 meters from copper extended to 2 km (multimode fiber) or 120 km (single mode fiber). Using sophisticated switching core, support hot-swappable, with flexible, efficient, reliable etc. It's widely used in Telecommunications, Broadcasting, Broadband networks, Million high-definition video surveillance ect where require high-performance, high-reliability network environment. Features 1, 10M/100M Adaptive, full/half duplex automatically configure in TP port. 2, The Max transmission distance: Mulit-mode 2KM,Single mode 120KM. 3, Using sophisticated switching core and ?large capacity of cache. 4, Supports LFP(Link Fault Pass-Through), Broadcast storm protection, Balanced Traffic, Isolate conflicts and Detection error. 5, Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX,100Base-FX Standards. 6, High-quality laser device has good optical properties, electrical properties and temperature stability. 7, Science Circuit layout , anti-interference ability, can effectively prevent lightning. 8, Working status indicator is complete, which can easily manage devices. 9, External professional switching power supply, security and stability. Power consumption is less than 4W. 10, Built-in lightning protection circuit, greatly reduce the damage caused by lightning induction.
Features: 1. Complies with 802.3u 100Base-TX and 100Base-FX 2. Provides UTP-to Fiber media conversion 3. Extentds network span to 2Km(multimode) 120Km(single mode) 4. Auto-negotiation on 100Base TX TP port 5. nteroperable with 100Base TX/TX devices 6. Provides Power, Link, and Receive Status LED Display 7. Supports a variety of fiber optic connectors to satisfy the extended requirements of users Applications: 10/100/1000Mbps Gigabit Optical Ethernet network with long-distance transmission
ForTronix 10G Managed Fiber Optical Media Converter Open SFP+ Slot converts and extends a 10G connection over fiber optical cables. And it extends the network transmission distance from 100m via copper cables to 100 km via fiber optical cable. Moreover, this Fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation. At the meantime, it supports for full-duplex operation, and its Jumbo Frame support provides efficient network operation. In addition, this versatile 10G Managed Fiber Optical Media Converter Open SFP+ Slot is compatible with most 3COMâ?¢, Ciscoâ?¢, Lucentâ?¢ and Nortelâ?¢ networks and fully complies with applicable IEEE 802.3 standards. Furthermore, its design widely applied to home, office and private sectors applications.
Short Description: Features In accordance with Ethernet standards IEEE802.3, 10/100/1000Base-TX to 1000Base-FX Supported Ports: LC for optical fiber; RJ45 for twisted pair Auto-adaptation rate and full/half-duplex mode supported at twisted pair port Auto MDI/MDIX supported without need of cable selection Up to 6 LEDs for status indication of optical power port and UTP port External and built-in DC power supplies provided Up to 1024 MAC addresses supported 512 kb data storage integrated, and 802.1X original MAC address authentication supported Conflicting frames detection in half-duplex and flow control in full duplex supported LFP function can selectable before order 1.Introduction 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 100 kms relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks. .Operating Environment 1) Operating Voltage AC 100-220V/ DC +5V 2) Operating Humidity Operating Temperature: 0â?? to +50â?? Storage Temperature: -20â?? to +70â?? Humidity: 5% to 90% 4.Quality Assurance MTBF > 100,000 hours; Replacement within one year and non-charge repair within three years guaranteed 5.Application Fields For intranet prepared for expansion from 100M to 1000M For integrated data network for multimedia such as image, voice and etc. For point-to-point computer data transmission For computer data transmission network in a wide range of business application For broadband campus network, cable TV and intelligent FTTB/FTTH data tape In combination with switchboard or other computer network facilitates for: chain-type, star-type and ring-type network and other computer networks 6.Remarks and Notes 1) Instructions on Media Converter Panel Instructions on Front Panel Identification for front panel of the media converter is shown below:
Short Description: 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup usersâ?? needs, achieving high-speed remote interconnection for up to 100 kmâ??s relay-free computer data network.We can offer dual fiber multi-mode as well single fiber single-mode. Application : With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Media converter desktop 1 u 10/100/1000mbps sc/fc single mode/multi-mode 1/2 core 2~120km ac/dc internal/external power Standard export carton packing
Product Name:10/100/1000M Single fiber Media Converter Type: Fiber optic media converter Warranty Time:3 Years link Port:SC Bidi Simplex Fiber Port Transmisssion Diatance:20, 40, 80km Power Supply:DC5V1A Transfer Mode:Store and forward Dimensions:95*73*28mm N.W:0.3KG Operating Temperature:0 C +70 C Certification:CE FCC RoHS
1 Fiber Port 1 UTP Port 10/100M 1550nm Tx/1310nm Rx 20km 19 SC Interface Commercial Temperature External Power Supply 220V AC
TRX E1-10/100Base-T developed by Hengguang Technologies, employs the clarity E1 transmission channel in accordance with ITU-T G.703 advice and IEEE802.3 standard with independent intellectual property. It is a kind of remote transmission equipment transmitting 10 Base-T data. With an independent structure, TRXE1-10Base-T can transmit 10Base-T data through E1 channels and extend work distance of the interface between two Ethernets through E1 channels such as optical fiber, microwave DDN nets and so on. It can use the existing communication network structures and interfaces efficiently without impropriating optical fiber core or additional equipment.
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. it can extend the transmission distance ranges from several kilometer to hundred kilometer.
Media Converter is one technical product that was used to change the optic signal to electric signal,which help us solve the problem how transmitt the signals through a long distance,as the development of the information age,media converter become more and more popular, They are available between the fiber lines and cable lines.And they have obtained a big market in, telecommunications, broadcasting, railways, military, finacial, securities, customs civilaviation, shipping, local area network ,CATV Features 1.Support EEE802.3protocol,IEEE802.3u,100Base-TX,100Base-FX,IEEE802.3Z,1000Base-t Ethernet Standard 2.Support full-duplex and half-duplex transmission mode 3.Provide one or moer switching twisted pair ports of 10Mbps/100Mbps self_adaptive or 1000Mbps, 10Mbps/100Mbps/1000Mbps self adaptive and one 155Mbps or 1.25Gbps fiber interface. 4.Support up to 1552 byte long packet transmission 5.Supply the optical fiber transmission of dual-fiber multi-fiber,dual-fiber signel_mode and single-fiber single-mode. 6.External and internal power can be choosed 7.media converter with external power supply can match with 2U-14 slots rack and card-inserted type media converters can match with 2U-16 slots rack 8. Comprehensive LED 9. Port support Auto-MDI/MDIX automatic reverse Technical parameters 1.Transmission rate:10/100Mbsp,1000Mbsp, 10/100/1000Mbsp 2.Working wavelengh:850/1310/1550nm 3. Ethernet port:1/2/4port,Connect STP/UTPCat5 4. Fiber Connect:SC/FC/ST/SFP 5. Transmission Distance: 5.1 Dual-fiber and Multi-mode:2KM 5.2 Single-Fiber and Single-Mode:20/40/60/80KM 6.3Dual-Fiber and Single-mode:20/40/60/80/120KM 7.Power Input:AC110/220V,DC-48V,DC24V,DC12V,DC5V 8.Working Temperature: 10 ~ 50 9.Storage temperature: -40 ~ 70 10.Environmental humidity: 5% -90% 11.power consumption: 2.5W/8W Applications 1. apply to ready to rise to 10M extended enterprise network bandwidth 1000M 2. apply to images, voice and other multimedia data on an integrated transport network 3. point applies to the computer signal transmission in need of the occasion 4. widely used for computer data transmission network to meet a variety of business needs 5. apply to the campus broadband network, broadcasting network and intelligent residential broadband fiber-to-floor fiber to the home data transfer 6. with the switches and other computer network equipment can be combined to form:-chain, star, ring-type network and other computer networks 20-5000/ 0.67KG 27*16*6(CM)
SPC-10/100/1000M Series Media Converter can be used in the telecommunication IP MAN broadband optical network solution for its steady performance and powerful function.It convert 1000bps Ethernet copper port to optical port,up to 80km distandce on single-mode fiber without any relay device.It support auto-sending 10/100/1000Mbp half/full duplex topology,and MDI/MDI-X auto recognize. Selectable SC, FC, ST optical port makes the networks more flexible and feasible for the possibility of cost reduction. Package: carton Size:22X16X8cm.