The 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Features: MTP/MP0 optical connector Single +3.3V power supply Hot-pluggable QSFP28 MSA form factor Up to 100m OM4 MMF Distance 4x28G Electrical Serial Interface (CEI-28G-VSR) AC coupling of CML signals Low power dissipation(Max:3.5W) Built in digital diagnostic function Operating case temperature range:0 to 70 Compliant with 100GBASE-SR4 I2C Communication Interface Applications: 100GBASE-SR4 Infiniband QDR/DDR/SDR 100G Datacom connections Standards: Compliant with IEEE 802.3ba Compliant with QSFP28 MSA hardware specifications Compliant with RoHS
Up to 27.952Gbps Data rate per channel.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.
Hot Pluggable QSFP28 form factor Supports 101.3Gb/s aggregate bit rate Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF Single MPO-12 receptacle Power dissipation:
Features: Lead-free Wavelength selectable to c-band itu-t grid wavelength No reference clock required Cold start up wavelength compliance Dwdm-rated eml transmitter and pin receiver Link length: 80km With rohs directive-compliant
Duplex LC connector Commercial temperature rang -40C-85C (optional) 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR Maximum link length of 120Km Single 3.3V power supply Standard bail release mechanism RoHS Compliant Products Available.
Video optic transceiver 1.Support point-to-point connection 2.Digital broadcast transmission without compressing and damaging 3.No mutual interference of frequency modulation. phase modulation and amplitude modulation 4.Support video regenerated delay without loss. 5.Compatible with PAL, SECAM and NTSC video standard 6.Support any high-resolution video signal 7.Support simultaneous transmission of video. audio. data. Ethernet telephone signals 8.Gigabit fiber transmission technology. high capacity. easily upgrade 9.Provides single mode or multi-modes fiber transmission. Distance0-100 kilometer 10.Dedicated ASIC design and high speed DSP Technology 11.Fiber technology of WDM / CWDM / DWDM Advanced adaptable technology and no regulation 12.Surface Mount Technology
Sfp optical transceiver Hot-pluggable, duplex lc connector Single +3.3v power supply Lvpecl data interface 850/1310/1550nm vcsel/fp/dfb, sm/mm fiber optional Eye safety, designed to meet laser class1 Compliant with telcordia (bellcore) gr-468-core
1x9 mm optical transceiver Transmitter center wavelength:850nm, 1310nm Single +3.3v or +5v power supply Lvpecl / pecl data interface, dc coupling 1x9 package Compliant with telcordia (bellcore) gr-468-core Eye safety, meet laser class 1, compliant with iec60825-1 Isolation >30db, cross talk
MPO Trunk Cables are designed for high density application which offers excellent benefits in terms on-site installation time and space saving. The trunk cable assemblies are composed of high quality LSZH jacketed fiber optic cables used in data center, telecom and backbone application for 100G connectivity. Our MPO trunk cables are factory pre-terminated, tested and packed along with the test reports. MPO Trunk Cable are built with highest quality components. 24 Fiber MPO trunk patch cord assemblies are used to interconnect CFP/CFP2/CFP+/CXP transceivers.
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm Max Cable Distance 10km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
SFP-CWDM Fiber-optic Transceiver SFP-CWDM-xx SFP Fiber-optic Transceiver with Up to 155M/1.25Gbps Data Rate 1470/1490/1510/1530/1550/1570/1590/1610nm Wavelength(DFB laser) Reach to 40km/80km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper. 1) Weight:0.02KG/PIECE; 2) Dimensions:60*12*11mm.
X2 10G Fiber-optic Transceiver X2-10GB-SR/LR X2 Fiber-optic Transceiver with Up to 10GB Data Rate 850nm/1310nm Wavelength(DFB laser) Reach to 85m/10km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.
Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70â?? - RoHS compliant Applications - 25G Ethernet
25G SFP28 850nm 300M SR with DDM Transceiver Item NO.:ESP852A-3LCD03 Date rate: 25G Wavelength:850nm Distance:300M Connector:LC First:MM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features Supports 25Gbps data rate�70m on OM3 MMF and 100m on OM4 MMF� 850nm VCSEL laser and PIN photo-detector� Inter CDR on both Transmitter and Receiver channel� Duplex LC receptacle�Single 3.3V power supply�Power dissipation < 1W� DDM functions are available via the I2C interface�RoHS-6 compliant� Commercial case temperature range: 0°C to 70°C. Applications 1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface 4.Switched backplane applications 5.Router/Server interface 6.Other optical transmission systems
This QSFP+ module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber. Features: 4 independent full-duplex channels Up to 11.2Gbps data rateper channel MTP MPO optical connector QSFP+ MSA compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3multi-mode ribbon fiber CML compatible electrical I/O Single +3.3V power supply Operating case temperature: 0~70? XLPPI electric interface (with 1.5W Max power) RoHS-6 compliant Applications: Rack to rack Data Center Infiniband QDR, DDR and SDR 40G Ethernet OEM & Customs Partnering with a variety of world class OEM manufacturers over 8 years, Fiberstore is able to provide customized and cost-effective solutions of high quality for all needs and specifications, including Optical design, Mechanical design, Printed Circuit Board (PCB) layout and Electrical design, Software & Firmware design, Integrated assembly, Specific labels, etc.
Main specifications: As size, structure, material, surface treatment and so on that the customers required. We supply them with good quality and low price. Please contact us to know details. Besides, there are a large volume of optical components in various shapes and sizes in stock to facilitate quick deliveries. Safety carton package
40g cwdm sm 10km qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 cwdm Distance: 10km Interface: lc Fiber: sm Ddm: yes Place of origin: made in china Port:shenzhen Applications 40gbase-lr4 40g ethernet links Infiniband qdr and ddr interconnects Client-side 40g telecom connections Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc. With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal. With built-in distribution amplifier, CHM-4KR provides 2 channels output. CHM-4K supports SMPTE178 standardpassed the test of SDI pathology. Features: 1. Supports SMPTE424M, SMPTE292M, SMPTE259M 2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI 3. The best solution for live casting by connecting with 4 channels 3G-SDI 4. With cable equalize at the input/Output, it can make up the loss of cable transmission 5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable) 6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain: 1) Optical interface type; 2) laser working wavelength; 3) transmitting/receiving optical power; 4) working temperature; 5) input/output working status of each channel signal; 6) voltage of dual power supplies for main board; 7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply. 8. Supports SMPTE178 standardpassed the test of SDI pathology 9. Dual power suppliers can be selected, which can supply power independently, backup redundantly 10. Network management can be selected, support SNMP and web monitoring
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm Max Cable Distance 10km Connector Duplex LC Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB Media SMF Power Consumption
