Quick information Brand name:chuang rui Place of origin:china Power :electric Standard or nonstandard :standard Price condition :fob Description Product description: 1.Doses each capable of being set for either individual days and times, individual times every day of the week (all) or off. 2.Dose setting in ml (can be individually calibrated by user if required). 3.Ecurity lock feature which d 1.Approx 100ml/ min pump ou tput when using 6mm id pump tube. 2.Installation instru ction s: remove all packaging. Mount rear of case to wall using fixing plugs and screws supplied. (do not over tighten). Fit cas e lid hol e caps. 3.When the disp3 000 is set pipe up system using parts provided in the kit. The tube should then be positioned in the feed bottle. The remainder of the flexible pipe should be run to the injection point. Once primed the unit is ready to operate. Price Delivery port :tianjin Packaging & delivery Packing :carton with plastic foam, make sure the peristalti Delivery lead time :shipped in 3-7 days after payment (except for special customization) Supply ability :2000sets/month
Usage Zhongchuang Xingyuan Chemical Technology co.,ltd. Its principal usage is in mining, tannery and fertilizer. It is also extensively employed as a constituent� of dyeing, electro-bath and soldering fluxes. Also it is used in galvanizing, tinning, medicine, candle making, adhesive, chromizing , precision casting , producing dry storage batteries ,storage batteries , ammonium salts, tanning leather, electroplating, photography, electrodes, adhesives
The Siemens MAG 8000W flow meter is an affordable battery powered water meter, providing the flexibility to install a reliable water meter virtually anywhere. No mains power is required as the MAG 8000 can use an internal or external battery pack, which allows operation in stand-alone applications for up to 10 years. MAG 8000W water meter complies with the OIML R49 and European CEN EN 14154 water meter standard and is specially engineered for stand-alone water applications. MAG 8000W battery powered flow meter boasts 6 years maintenance-free battery-powered operation, and delivers best-in-class performance to optimize water supply. It is optimized for leakage detection and is often used for accurate billing. The integrated datalogger can be twinned with the use of a selectable alarm to signal too-high or too-low flow.
SPECIFICATIONProduct Name:e-cig li ion batteryModel:IFR10360Rated Capacity:120mAhWeight:Approx. 5gNominal Voltage:3.2VPack Dimension:Height:36±0.3mmDiameter:10.1±0.2mmVoltage at end of Discharge:2.0VMaximum Continuous Discharge Current 3CVoltage at end of Charge:3.65VMaximum Continuous Charge Current 1CStandard Charge:Constant Current 0.2CConstant Voltage 3.65V0.02C cut-offStandard discharge: Constant Current 0.2CEnd Voltage 2.0V Operating Temperature:Charge: 0~45â??Storage TemperatureLess than 1 yearï¼?-20~25â??Discharge: -10~60â??Less then 3 monthsï¼?-20~40â??Cycle times:â?¥2000@ 80% DODWarranty: 2 yearsApplication: E-cigarette, medical equipment,etc... PRODUCT IMAGE Features and Advantageâ?¦Safety: safest Lifepo4 battery, UL,UN38.3,UL,CE ROSH approved, built in PCM/PCB, none fire or explosive â?¦Clean and Green energy, no toxic material contained â?¦Good performance at high temperature and high temperature resistance  â?¦No memory effect,highly efficient charge anytime,no reduction of capacity â?¦Small size, light weightFAQ1 I want to custom battery pack, can you make it?  We are lithium Battery Manufacturer for 7 years,so if you have any request on li-ion battery packs, simply send us an  inquiry.2 How Soon can i get samples, and how much will you charge it, will you refund?   We make samples in about 3-12 days, depending if we have them on stock, no extra mark upon samples, and will refund on mass production.3 Whatâ??s your warranty? When does it start?   All of our products have 1-2 years limited warranty, start from the shipping date.4 What will You Do if we got damaged products when arrive?   We will replace new goods at our cost if the batteries are damaged when arrive, no charges on your side, please contact us for images of damage.5 How about your lead time, and especially when can i get the goods  after i make payment?   Lead Time for samples is about 3-10 days and bulk order around 12-25 days depending on the order quantity and our orders on schedule.
SPECIFICATIONProduct Name:e-cig li ion batteryModel:IFR10360Rated Capacity:120mAhWeight:Approx. 5gNominal Voltage:3.2VPack Dimension:Height:36±0.3mmDiameter:10.1±0.2mmVoltage at end of Discharge:2.0VMaximum Continuous Discharge Current 3CVoltage at end of Charge:3.65VMaximum Continuous Charge Current 1CStandard Charge:Constant Current 0.2CConstant Voltage 3.65V0.02C cut-offStandard discharge: Constant Current 0.2CEnd Voltage 2.0V Operating Temperature:Charge: 0~45â??Storage TemperatureLess than 1 yearï¼?-20~25â??Discharge: -10~60â??Less then 3 monthsï¼?-20~40â??Cycle times:â?¥2000@ 80% DODWarranty: 2 yearsApplication: E-cigarette,medical equipment,etc... PRODUCT IMAGE Features and Advantageâ?¦Safety: safest Lifepo4 battery, UL,UN38.3,UL,CE ROSH approved, built in PCM/PCB, none fire or explosive â?¦Clean and Green energy, no toxic material contained â?¦Good performance at high temperature and high temperature resistance  â?¦No memory effect,highly efficient charge anytime,no reduction of capacity â?¦Small size, light weightFAQ1 I want to custom battery pack, can you make it?  We are lithium Battery Manufacturer for 7 years,so if you have any request on li-ion battery packs, simply send us an  inquiry.2 How Soon can i get samples, and how much will you charge it, will you refund?   We make samples in about 3-12 days, depending if we have them on stock, no extra mark upon samples, and will refund on mass production.3 Whatâ??s your warranty? When does it start?   All of our products have 1-2 years limited warranty, start from the shipping date.4 What will You Do if we got damaged products when arrive?   We will replace new goods at our cost if the batteries are damaged when arrive, no charges on your side, please contact us for images of damage.5 How about your lead time, and especially when can i get the goods  after i make payment?   Lead Time for samples is about 3-10 days and bulk order around 12-25 days depending on the order quantity and our orders on schedule.
SPECIFICATIONProduct Name:e-cig li ion batteryModel:IFR10360Rated Capacity:120mAhWeight:Approx. 5gNominal Voltage:3.2VPack Dimension:Height:36±0.3mmDiameter:10.1±0.2mmVoltage at end of Discharge:2.0VMaximum Continuous Discharge Current 3CVoltage at end of Charge:3.65VMaximum Continuous Charge Current 1CStandard Charge:Constant Current 0.2CConstant Voltage 3.65V0.02C cut-offStandard discharge: Constant Current 0.2CEnd Voltage 2.0V Operating Temperature:Charge: 0~45â??Storage TemperatureLess than 1 yearï¼?-20~25â??Discharge: -10~60â??Less then 3 monthsï¼?-20~40â??Cycle times:â?¥2000@ 80% DODWarranty: 2 yearsApplication: E-cigarette,medical equipment,etc... PRODUCT IMAGE Features and Advantageâ?¦Safety: safest Lifepo4 battery, UL,UN38.3,UL,CE ROSH approved, built in PCM/PCB, none fire or explosive â?¦Clean and Green energy, no toxic material contained â?¦Good performance at high temperature and high temperature resistance  â?¦No memory effect,highly efficient charge anytime,no reduction of capacity â?¦Small size, light weightFAQ1 I want to custom battery pack, can you make it?  We are lithium Battery Manufacturer for 7 years,so if you have any request on li-ion battery packs, simply send us an  inquiry.2 How Soon can i get samples, and how much will you charge it, will you refund?   We make samples in about 3-12 days, depending if we have them on stock, no extra mark upon samples, and will refund on mass production.3 Whatâ??s your warranty? When does it start?   All of our products have 1-2 years limited warranty, start from the shipping date.4 What will You Do if we got damaged products when arrive?   We will replace new goods at our cost if the batteries are damaged when arrive, no charges on your side, please contact us for images of damage.5 How about your lead time, and especially when can i get the goods  after i make payment?   Lead Time for samples is about 3-10 days and bulk order around 12-25 days depending on the order quantity and our orders on schedule.
SPECIFICATIONProduct Name:e-cig li ion batteryModel:IFR10360Rated Capacity:120mAhWeight:Approx. 5gNominal Voltage:3.2VPack Dimension:Height:36±0.3mmDiameter:10.1±0.2mmVoltage at end of Discharge:2.0VMaximum Continuous Discharge Current 3CVoltage at end of Charge:3.65VMaximum Continuous Charge Current 1CStandard Charge:Constant Current 0.2CConstant Voltage 3.65V0.02C cut-offStandard discharge: Constant Current 0.2CEnd Voltage 2.0V Operating Temperature:Charge: 0~45â??Storage TemperatureLess than 1 yearï¼?-20~25â??Discharge: -10~60â??Less then 3 monthsï¼?-20~40â??Cycle times:â?¥2000@ 80% DODWarranty: 2 yearsApplication: E-cigarette,medical equipment,etc... PRODUCT IMAGE Features and Advantageâ?¦Safety: safest Lifepo4 battery, UL,UN38.3,UL,CE ROSH approved, built in PCM/PCB, none fire or explosive â?¦Clean and Green energy, no toxic material contained â?¦Good performance at high temperature and high temperature resistance  â?¦No memory effect,highly efficient charge anytime,no reduction of capacity â?¦Small size, light weightFAQ1 I want to custom battery pack, can you make it?  We are lithium Battery Manufacturer for 7 years,so if you have any request on li-ion battery packs, simply send us an  inquiry.2 How Soon can i get samples, and how much will you charge it, will you refund?   We make samples in about 3-12 days, depending if we have them on stock, no extra mark upon samples, and will refund on mass production.3 Whatâ??s your warranty? When does it start?   All of our products have 1-2 years limited warranty, start from the shipping date.4 What will You Do if we got damaged products when arrive?   We will replace new goods at our cost if the batteries are damaged when arrive, no charges on your side, please contact us for images of damage.5 How about your lead time, and especially when can i get the goods  after i make payment?   Lead Time for samples is about 3-10 days and bulk order around 12-25 days depending on the order quantity and our orders on schedule.
SPECIFICATIONProduct Name:e-cig li ion batteryModel:IFR10360Rated Capacity:120mAhWeight:Approx. 5gNominal Voltage:3.2VPack Dimension:Height:36±0.3mmDiameter:10.1±0.2mmVoltage at end of Discharge:2.0VMaximum Continuous Discharge Current 3CVoltage at end of Charge:3.65VMaximum Continuous Charge Current 1CStandard Charge:Constant Current 0.2CConstant Voltage 3.65V0.02C cut-offStandard discharge: Constant Current 0.2CEnd Voltage 2.0V Operating Temperature:Charge: 0~45â??Storage TemperatureLess than 1 yearï¼?-20~25â??Discharge: -10~60â??Less then 3 monthsï¼?-20~40â??Cycle times:â?¥2000@ 80% DODWarranty: 2 yearsApplication: E-cigarette,Website:http://www.xinmucell.com, medical equipment,etc... PRODUCT IMAGE Features and Advantageâ?¦Safety: safest Lifepo4 battery, UL,UN38.3,UL,CE ROSH approved, built in PCM/PCB, none fire or explosive â?¦Clean and Green energy, no toxic material contained â?¦Good performance at high temperature and high temperature resistance  â?¦No memory effect,highly efficient charge anytime,no reduction of capacity â?¦Small size, light weightFAQ1 I want to custom battery pack, can you make it?  We are lithium Battery Manufacturer for 7 years,so if you have any request on li-ion battery packs, simply send us an  inquiry.2 How Soon can i get samples, and how much will you charge it, will you refund?   We make samples in about 3-12 days, depending if we have them on stock, no extra mark upon samples, and will refund on mass production.3 Whatâ??s your warranty? When does it start?   All of our products have 1-2 years limited warranty, start from the shipping date.4 What will You Do if we got damaged products when arrive?   We will replace new goods at our cost if the batteries are damaged when arrive, no charges on your side, please contact us for images of damage.5 How about your lead time, and especially when can i get the goods  after i make payment?   Lead Time for samples is about 3-10 days and bulk order around 12-25 days depending on the order quantity and our orders on schedule.
High and low temperature explosion-proof test chamberStructure and Characteristics: 1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system. 2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying. 3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber. 4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function. 5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water. 6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts. 7.Input mode PT100 sensor. 8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate. 9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber. 10.With larger transparent viewing window and lighting inside to observe the test. 11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions. 12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement. 13.With various of safety protection device such as leakage and outage protection,compressor over pressure protection,overload fusing protection,audio signal alarm.
Place of Origin: Guangdong, China (Mainland) Brand Name: Lecemo Model Number: LPWK-JYF-D1 2k-5 Dimension: 97.8*25.8*22.3mm Weight: 80g Capacity: 3000-4000(mAh) Outport: DC 5V /1A (Max) Input: DC 5V / 1A Socket Type: USB Port Color: Gray, Silver USB Port: 1 USB Port Battery Type: Li-ion Polymer Battery Features: High Capacity Keywords: wholesale charger power bnak Warranty: 12 Months Type: smart mobile power bank 3500mah Item: Cell Phone Charger Support devices: Smart Phones/ipod/ipad/mp3/mp4/bluetooth capacity: 2500mah LED Torch: NO Colors: Bllack+gold/silver contact information: Whatsapp/Wechat:+86---13510541513 Sally Wong
NTC Thermistor At Ya Xun,We offer a full range of NTC thermistor component services, products include: Mixed metal element - isostatic pressing forming - High temperature sintering - Semiconductor sliced - Dicing - Glass sintering or epoxy encapsulation - Finished product testing. We manufacture thermistors that export all over the world,Also created China's most high-quality sensitive components, with economic prices that can not be found elsewhere. When you send us a product parameter inquiry, our engineers will review your product requirements, and will explain to you the product features and applications, make sure the product meets your requirements. What Is NTC Thermistor NTC thermistor is a negative temperature coefficient thermistor, NTC thermistor can be widely used in temperature measurement, temperature compensation, suppression of inrush current and other occasions. Characteristics Of NTC Thermistors 1, At the Ya Xun, NTC thermistor is the most important feature is the long service life, after the ultra-high temperature, high pressure test. The product is still high precision, high sensitivity, high reliability, it can still work for a long time stable. 2, small size, able to measure other thermometers can not measure the space, cavity and the temperature of blood vessels in the body; 3, easy to use, the resistance value can be arbitrarily selected between 0.1 ~ 100k 4, we can provide customers with different appearance of the shape of thermistor, and mass production; 5, Good stability, strong overload capacity. NTC Thermistor Chip Sintering Process NTC thermistor semiconductors are mostly spinel structures or other structures of oxide ceramics, use manganese oxide, the copper, the silicon, the cobalt, the iron, the nickel, the zinc, or the like are sufficiently mixed,Molding, sintering and other processes made of semiconductor ceramics, can be made with a negative temperature coefficient (NTC) thermistor. The resistivity and material constant vary with the material composition ratio, sintering atmosphere, sintering temperature and structure state. NTC thermistor different seal To meet the convenience of customer installation, Ya Xun every year will introduce different packages of products, can also be customized according to customer requirements of different shapes,NTC thermistor package also achieved diversification.Common products include: Epoxy thermistor, Single-ended glass thermistor, SMD glass thermistor, Resistive glass thermistor, Enameled wire thermistor, Thin film thermistor, SMD thermistor and so on .
Light source:6pcs 18w 6in1(rgbaw+uv) leds Lithium battery:capacity7800mah Charger:voltage and current12v 3a Charging time5hours 2.4g transceiver:tx power+23dbm Sensitivity:-94dbm Channel no:7 Commnication distance:-94dbm Optical:lens angle:25 Lens size:42mm Control singal:protocol:usittt dmx-512 / rdm compatible Channel mode:6ch/10ch Operating modes:standalone, master/slave, sound active, dmx-512, rdm Programs:preset colors, auto chase effect, auto fade effect, customs Dimmer mode:linear/exponential/logarithmic/hyperbolic Pwm dimming:16bit dimming with 1000hz frequency Body material:aluminum die-casting Cooling method:intelligent cooling system with heat sink and fan both Protection:real time temperature monitoring & over temperature protection Other features:32bit arm cotex mcu, constant current drived, Warranty:1-year limited warranty Net weight:2.5kgs Product dimension:170x170x140mm Product gw:3.2kgs Product size:230x220x200mm Packaging method:chargeable flight case option
Product Description High-performance foil 8021 is an alloy created from pure, aluminum base foil tempered with additional elements. Usually between 0.018 and 20 mm thick, 8021 aluminum foil is produced in many widths and strengths for literally hundreds of applications by Mingtai Al. Commonly used tempers of 8021 aluminum foil includes H14, H18, H22 and H24. Mill finished aluminum foil like battery shell foil, pharmaceutical foil is available from us. Our Services Pre-sales Service: 1. For partial materials, we can supply the sample free (without the freight charge). 2. Customers are welcomed to visit the factory. After Sales Service: 1. Quality assurance certificate will be supplied with products 2. The customer can claim for compensation if the products are not check with the sample. 3. The products could be returned due to products quality. Payment terms 30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C. Company Information Overview Henan Mingtai Aluminum Co., Ltd. (referred to as Mingtai Al. for short) is a large modern aluminum processing enterprise that integrates processing, manufacturing, and scientific research. It primarily engaged in the producing and selling. The company consists of two main production bases, one is located in Gongyi City and the other lies in the high and new technology industrial development zone in Zhengzhou City, Henan Province, with an area of 250,000 square meters. Mingtai Al. has over 2600 employees, ten continuous casting production lines and more than 44 other large-scale processing equipments with an annual production of 450,000 tons. Scope of Service Presently, the companys products cover aluminum alloy products of Series 1xxx, Series 2xxx, Series 3xxx, Series 4xxx, Series 5xxx, Series 6xxx, Series 7xxx, Series 8xxx of different sizes. Main products include CTP plate stock, PS plate stock, aluminum electrode capacitor foil, foil stock, deep-draw stock, brazing sheet, alloy sheet and plate, etc. Those products are widely applied in industries including automobile making, traffic and transportation, packaging and containers, buildings and decorations, electrical and electronic, printing, etc. Development Strategy In 2016, Mingtai Al. will continue to stick to the enterprise spirit of olidarity, endeavor, objectivity and innovationâ; practice the management concept of green and sustainable development, rely on the high speed development of science and technology strive for the goal oftaking a lead in the aluminum processing industry around the world, achieve sustainable development and contribute to the development of society.
it is widely used as solvent in electrolyte for li-ion battery. It can be used as special fragrance and intermediate. Zinc plated drums, net weight 200+/-0.5kg
Vibration Motor Battery Powered Snake Mole Repeller emits powerful sonic waves(intermittent combination of sound and vibration) to the keen ears of underground rodents (moles, voles, snakes etc.) This upgraded version is more effective than the old version. There are ABS plastic and Aluminium tube for customers to choose. Specification Material: ABS Plastic Power Supply: 4pcs "D"size battery(not included) Frequency: 400HZ-1000HZ Effective Range: 600m2 Feature: With sound and vibration motor Size of Plastic Tube: 37.5cm*5.5cm Size of Alumininum Tube: 42cm*5cm
- L-W-H: 535*206*216 - NB(F16)/IT(F17) - more than 250 cycles at 100% discharge in cycle service. z
- Battery for motorcycle with maintenance-free design. - C.O.S application. - PP materialz
AA battery-operated flameless candle with remote control Feature 1.Variety size and function for optional,Single color,RGB,Pre-timer program,waterproof etc; 2.Only one 1.5V AAA battery can operated about 150 hours. 3.Integrated design, clip can be used separately, then can ensure the whole candle quality; 4. Infrared remote control more then 5 meters; 5.Easy installation, can clip on the Christmas treestick on the window or insert into the ground.
Main features of the system Modular design, N+1 backup,smooth expansion Perfect monitoring function, high intelligent Main monitor items: turn on/off, output voltage regulation, output current limit set, automatic battery management Automatic Battery management and maintaining: real-time monitoring of battery pack terminal voltage, charge/discharge current, automatic even and float charging & regular even charging Automatic temperature compensation Hot plug, easy to replace and safe
Wholesale China Factory Battery Powered E Rickshaw Tricycle For Sale 1- Standard Configuration of Electric Tricycle Product Electric Tricycle Category Tricycle Usage Cargo transportation Brand KAVAKI Model KV150ZH-XJG Driving Type Electric/Batter power Voltage 60V Battery 4 units Motor Power 1000W Controller Brushless Controller Brake Drum Rear Axle Complete rear axle Front Shock Absorber 3.7mm Liquid front shock absorber Tyre Size (F/R) F:2.75-14 / R:16X4.0 Tyre Material Steel Headlight LED Steel Spring 5 Layers Carriage Bottom Thickness 1.2mm Carriage Size(L*W) 1500mm*1000mm Vehicle Dimensions (L*W*H) 2900*1040*1330 Frame Size (L*W*H) 2250*700*620 Max Loading 700Kgs-800Kgs(Customized) Speed 30Km/h Charge Time 8-12 hours Battery Operating Time 1 Year Controller Operating Time 1.5 Year Charge Operating Time 1 Year Coating Electrophoresis Number Of Loading 20GP/20 Vehicles 40HQ/45 Vehicles 2- Main Features of Model KV150ZH-XJG: Electric Tricycle 1. Electrophoresis Coating: Newest car Technology, Corrosion-Resistant, Not Rust, Long Service Life. 2. 3.7mm Liauid Front Shocked Absorbed: Durable, Over All Quality Improvement. 3. LED Light: Energy Saving and Environment Protection, Strong Brightness, Wide Range of Light, High Visibility at Night, Long Service Life 4. All Thick Frame and Carriage, Soild and Durable, Not Deformed 5. Battery power. Good for environment protection. 6. Low noise design. 7. Economic & Practical model. Suitable for: Express service; Retails; Carry light/heavy goods; Farming transportation, etc. 3- Packing Method of Electric Tricycle Packing method CBU / SKD / CKD condition, carton packing or nuded packing Container loading 18-20 units / 20GP (SKD); 45 units / 40HQ (SKD) Volumn / unit SKD condition: 3-3.5 cbm 4.FA Q Q1. Are u trading company or factory? A: We are original factory located in Panyu Guangzhou China and has been in this business since 2004. U're warmly welcome to visit our factory! Q2. How can I get to your factory? A: Our factory is located in Panyu Guangzhou China. The nearest subway station is Xinzao Station, Line 4. Q3. What is your product range? A: We specilized in Three Wheels Tricycle(Petrol/Electric) for cargo transportation and passengers.