Design allows to seal laterals connected to manholes. Injections have been done up to 30 feet. Logiball Man Entry Pipe Lateral Grouter is an inflatable bladder with threaded adapter used to install our standard lateral grouting plugs to seal laterals from a man entry pipe or a manhole. It includes one inflation port for the lateral bladder, one inflation port for the 4-6 bladder, two ports for the chemical grout and one void liquid filled pressure sensor line.
Logiball Elliptical Mainline test and seal injection packers are custom-made for the exact pipe dimensions and the available access to the storm sewer lines. The two end rubber bladders are covered with a soft rubber sleeve that provides superior seating against rough surfaces. Our elliptical grout packers are equipped with a localized pressure sensor and two injection grouting ports protected by a large, non-clogging adjustable rubber check-valves. Contact us if you need a special configuration. Rentals available, contact our sales department for further information.
2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. Logiball 2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. A thick, reinforced SBR rubber sleeve is bonded to the stainless-steel core and a layer of softer rubber is applied over the seating portion to provide superior seating against rough surfaces. The smooth outer finish reduces the adherence of the grout on the packer. Logiball 2001J Mainline Packers come with two grout ports and a third port dedicated for the test medium (air or water). MAIN FEATURES: Void Pressure Monitoring Systems: Two different void pressure monitoring systems are available to accurately transmit the void test and grouting pressures to a gauge read by the camera or through a pressure transducer. The conventional localized sensor is recommended for acrylamide and acrylate grouts. The in-wall water chamber sensor is recommended for stickier grouts such as urethane gels and polyurethanes. The 2001J Packer can be ordered with both systems or one of the two as needed by customer. Dedicated Test Port: By using a dedicated hose from the truck to the packer for the test medium (air/water), â??Hâ?? blocks are eliminated and the mixing ratio of the two-part grout is kept constant (no flushing of the catalyst when testing). Features Three-Function Adjustable Rubber Check-Valve: They provide added safety against syphoning the tanks and unwanted backflow contamination into the hoses, and provide a good mixing of the two-part chemicals through the fan like stream of the opposed and adjacent ports. The Autotesting Concept: When inflating the 2001J packers, the ends first seal against the pipe wall, while its central portion progressively expands, trapping air and water, and compressing it into the mixing chamber. The pressure in the chamber is transmitted through the improved liquid filled sensor and/or the in-wall water chamber sensor to a gauge or transducer installed on the packer. The operator can tell if a joint is obviously good or not by simply inflating the packer over it. By avoiding time consuming conventional tests, productivity could be increased by as much as 30%. Logiball 2001J Packers approximate void volumes. ICGA promotes the proper use of chemical grouting as a safe, economical and effective mean to reduce ground water.
Reprocessing Plugs Logiball Reprocessing Plugs are field-tested and approved by relining contractors around the world. Ideal for reprocessing the CIPP liners or installing FF liners in pipe sizes ranging from 6â?? to 21â??. These plugs come with a 1/2â?? thick rubber sleeve, reinforced with multiple layers of fabric, and molded on an aluminum core. Steel or stainless-steel construction are also available upon request. FEATURES Rubber sleeves can be factory-replaced. Larger and custom-made configurations are possible. Contact us with your requirements to request a quote.
Controlling the live flows from the surface Logiball multisize high/low flow inflatable sewer plugs allow for optimal flow control during CCTV inspection, pipe reinstatement or sectional lining. By maintaining the sewer flow active, under control and at a reasonable level, work can be performed downstream without completely blocking the flow or requiring bypass pumping. The active flow is controlled from above ground, with the Logiball High Flow/Low Flow Plug. When inflating the plug, the outer bladder expands and seals the host pipe. A separate controlled air line is used to expand the internal sleeve, similar to a pneumatic pinch valve, which reduces the amount of flow going through the center of the plug. The operator can decide how much water flow is allowed to go through the plug by pressurizing or depressurizing the internal seal from the surface, never having to enter the manhole. By releasing the pressure in the internal sleeve, flow is allowed to go through the plug, reducing the back pressure applied on the plug and allowing for a safe plug removal. Features Logiball High Flow/Low Flow Plugs cannot be used for air testing. Air hoses sold separately.
Lightweight inflatable type E plugs Logiball lightweight inflatable type E plugs are your best option for submerged pipes and short sections of pipes. Each plug is factory-tested at the factory at twice the recommended inflation pressure. The light and compact structure of these multisize plugs makes it possible to safely plug small pipes from the surface, using a pipe handle. Perfect for tight, hard-to-reach places, these rubber plugs come with a strong anchoring chain and are made to be used with a standard pipe handle.
Logiball Type D inflatable sewer plug Logiball Type D inflatable sewer plugs are a great tool for by-pass pumping and/or flow diversion when performing manhole and invert rehabilitation. Our Type D pipe plugs feature a double-action bladder: When inflating the plug, the inner bladder forms a tight seal around the by-pass pipe or the pump suction hose, while the outer bladder completely seals against the pipe wall. This â??slip it in and inflate unique feature will save you both time and effort. Logiball Type D plugs are available for pipe sizes ranging from 3â up to 16 in diameter.
Logiball push-type cleanout plugs (type a & b) Logiball push-type inflatable rubber plugs are offered with or without flow-thru for pipe diameters ranging from 3â?³ to 6â?³. These flexible plugs can be inflated and pushed from the cleanout with the optional semi-rigid hose assembly.
Logiplug inflatable sewer plugs Logiplug inflatable sewer plugs can be used in a wide variety of applications such as by-pass pumping, flow control and flow diversion. Logiplug pneumatic plugs can be used for completely stopping water flow when the flow-thru is plugged off. Logiplug rubber plugs are manufactured on lightweight aluminum mandrels. Steel or stainless-steel mandrels are also available upon request. The SBR rubber sleeve is reinforced with two plies of nylon cords for increased durability. Different types of elastomers are available depending on your needs. All Logiplug inflatable sewer plugs are factory tested, at an inflation pressure corresponding to twice the recommended pressure. Each plug is shipped with an inspection certificate and a safety information leaflet.
Used for low pressure line acceptance testing, sewer pipe plugging and flow control. Our pneumatic plugs can be used for pipe sizes ranging from 4â?? to 36â??. Three different models are available: Type A: No flow-thru Type B: Flow-thru by-pass plug with a 2â?? hose (�½â?? hose for the 4-8 model) Type C: Flow-thru by-pass plug with two �½â?? hoses Our sewer plugs are designed to comply with the highest safety standards and include the following features: a two-ply cross-biased reinforced SBR rubber sleeve, anchoring device and end-plate retaining device for maximum strength. To ensure the quality of our products, every inflatable plug is individually tested under severe pressure. Each Logiball Securimax pipe plug is identified by a unique serial number and comes with a test certificate, a leaflet describing the features of the sewer plug and the information on its safe use.
Fuel transfer pump CBH-80 is made of aluminum alloy with low pressure casting. The mechanical seal on the spindle improves the sealing performance, and an overflow hole is provided to prevent excessive pressure. Technical Parameters Model CBH-80 Rated pump power 7500W Voltage 380V Rotation frequency 1450, s-1 (rpm) Direction of pump rotation Right or Left Supply 30m3/h Rated head 26m Self-priming height, not less than 6.5m Self-priming time, no more than 120s Permissible duration of self-priming, no more than 300s Leakage through the mechanical seal, not more than 30cm3/h Electric motor power 11 or 15kW
Medically 1 latex gloves 2 mask 3 disinfectant 4 stretcher cover 5 cologne 6 doctor overalls personally 1 sealed groups 2 foam groups 3 foil material 4 detergent 5 bleach 6 oil and lime remover 7 liquid soap 8 dishwasher rinse aid 9 dishwasher detergent 10 surface cleaner 11 paper cup 12 dispenser napkin 13 z towel 14 moving towel 15 garbage bag 16 refrigerator bag 17 grocery bags 18 microwave containers.
Ladies bags like handbags, clutches, tote bags, Heavy winter jackets and light wear or summer jackets and transitional as well as non transitional jackets like padded or insulated jackets, down jackets, fake down jackets, ballpoint padding jackets, bomber jackets, quilted jackets, pu leather jackets, fake down, diamond quilting jacket, fake down bonded fleece jacket, seam sealing jacket, seamless jackets, functional fake down jacket, sequins jacket and woolen jackets for all seasons in casual and fashion categories and backpack for all the age and gender groups..Produces
Semiautomatic Carton Sealer Is Mainly Used To Seal Cartons, Which Can Operate Alone And Can Also Be Equipped Into Production Line. The Machine Is Used In The Fields Of Domestic Electrical Appliance, Foodstuffs, General Merchandise, Medicine And Chemical Industries.
Manufacturer and supplier of garbage bags produced with 100% recycled LDPE. We produce according to customer request: Volume Size Flat or Star seal Colours Layer weight etc
Crankcase Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U"type "Nbr/Com/Buna N" material enhances the performance of the waterpump and improves its service life. The plunger support guide ring ensures thecoaxiality of the plunger, extending the service life of the water seal andplunger. Pump head assembly Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly The valve cage is made of sturdy and durable materials, with stainlesssteel 303 and 404 poppet valves and springs to extend its service life. Thedisassembly and assembly of one-way valve components is simple and easy tomaintain Pommel Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block Precision machining ensures coaxiality and concentricity. Crank axle Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring A better crankcase oil sealing system, with stainless steelsprings for oil seals and O-ring seals to ensure sufficient tension. Plunger connecting rod Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation.
We sell moringa seeds that are organically produced and highly preferred by vegans. Theproduct is appreciated by our buyers for its purity and organic nature. It is well-packed and sealed to avoid contamination and tampering.
PRESERVED ORCHID ARRANGED IN GLASS FOR DECORATIONS & GIFTS 100% Natural Fresh Flowers picked by hand and processed through a unique and non-toxic preservation method. Vacuum-sealed technology that keeps flowers fresh.
Size : S; M;L;XL; Absorption/ml:450; 550;650;750; wet indicator :NO Product size/mm : 390*320; 450*320; 490*320; 520*320; Carton Size/cm:25*25*10.5; 26*27*10.5; 27*30*10.5; 27*31*10.5; Package: 50pcs/bag; 4bags/carton
Size : L;XL;XXL;XXXL Absorption/ml:800; 900;950;980; wet indicator :YES Product size/mm : 490*400; 510*400; 540*410; 560*410; Carton Size/cm:46.5*46.5*39.5; 46.5*46.5*39.5; 46.5*35.5*40; 47*30.5*42; Package: 50pcs/bag; 44pcs/bag; 38pcs/bag; 32pcs/bag; 6bags/carton