Double-sided Spring Pogo Pin Test Probe SCPA030 Series Applied to IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPA030 we will introduce is 0.3 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from stainless steel plated with gold and nickel. This probe pin could withstand the current up to 1.5 Amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 2 mm. But it is better to be pressed at a distance of 0.85 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.85 mm, the loaded force is about 10 gf or 20 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Phosphor Bronze, Au on Ni Plated Bottom Plunger: SK4, Au on Ni Plated Top Plunger: SK4, Au on Ni Plated Spring: SUS304, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 100 milliohms max Bandwidth: 9.3 GHz at -1dB Inductance: 1MHZ at -0.02829 uH Captance: 1MHZ at -0.609436 uF Specifications: Full Stroke: 2 mm Rated Stroke: 0.85 mm Spring Force: 10�± 3 gf at load 0.85 mm, 20�± 6 gf at load 0.85 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCPB038 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCFB038 we will introduce is 0.38 mm in barrel diameter and 6 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.6 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.6 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: BeCu, Au on Ni Plated Top Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 100 milliohms max Bandwidth: 5.3 GHz at -1dB Propagation Delay: 27 ps Inductance: 1MHZ at -0.02809 uH Captance: 1MHZ at 0.876347 uF Specifications: Full Stroke: 1 mm Rated Stroke: 0.6 mm Spring Force: 25 7 gf at load 0.6 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Spring-Loaded Pogo Pin SCPA031(21) for Chip Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPA031(21) we will introduce is 0.31 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 Amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 0.7 mm. But it is better to be pressed at a distance of 0.45 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.45 mm, the loaded force is about 20 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: BeCu, Au on Ni Plated Top Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 2 amps Contact Resistance: 100 milliohms max Bandwidth: 7.4 GHz at -1dB Inductance: 1MHZ at -0.05996 uH Captance: 1MHZ at 0.425647 uF Specifications: Full Stroke: 0.7 mm Rated Stroke: 0.45 mm Spring Force: 20�?�±6 gf at load 0.45 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCFE035 for Integrated Circuit Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCFE035 we will introduce is 0.35 mm in barrel diameter and 18 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 150 milliohms. The plunger can be pressed at a distance of up to 1.5 mm. But it is better to be pressed at a distance of 1 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 1 mm, the loaded force is about 38 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: SK4, Au on Ni Plated Top Plunger: SK4, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 150 milliohms max Bandwidth: 9.3 GHz at -1dB Inductance: 1MHZ at -0.05517 uH Captance: 1MHZ at 0.462432 uF Specifications: Full Stroke: 1.5 mm Rated Stroke: 1 mm Spring Force: 38�?�±11 gf at load 1 mm Mechanical Life: about 200000 cycles For more information, please check below catalog. Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Premium gold is a limited edition of premium fitis bins, a protective layer prevents scuffs and scrapes from annoying your lovely housemate. Golden protective film is added along multi layers of fingerprint-proof finish that helps to avoid the smudges and keep gold shiny, keeping your housemate as tidy and good looking as possible. Especially, this especial edition is just for dubai market. Specification & price of small premium touch bin: Capacity (l): 12 – 15 Dim (cm): 28x26x46 & 30x24x44 Weight (kg): 2.4 – 2.6 Price (usd): 61 - 65 Love can be expressed in many ways. One way fitis know is to send the best wish across the distance to the person who is interested in fitis, because fitis is good housemates. So, don't hesitate to connect with us : Showroom: l3-05b vincom mega mall thao dien, dist 2, hcmc, vietnam.
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, Double-sided, Multi-layers (max 28 layers) and Rigid-flexible PCB, Aluminium board Surface Finishing: HASL(LF), Gold plating, Electroless nickel immersion gold, Immersion Tin, OSP(Entek) Base Material:Polyimide(Kapton), Polyester(PET), Aluminium, FR4 Copper Foil:ED/RA Min. Line Width:2 mil Min. Line Spacing:2 mil Min. Hole Size:0.2mm Max. Board Size:800x400mm Min. Board Thickness:0.1mm Min. Solder Mask Thickness:10um Solder Mask Types:Green, yellow, black, white, blue, red and clear Profiling:Punching, Routing, V-cut Soldering Thermal Resistance:300°C/10 seconds Peeling Strength:=1.4kg/cm Surface Resistance:105mO Insulation Resistance:105mO Dielectric Strength:9.8x105v/cm Flammability:UL-94V-0 Performance Test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Sterling silver jewellery, earrings, rings, pendants, bracelets, plain light silver earrings ( with and without self design), light sterling silver earrings with precious and semi precious stones such as peridot, blue topaz, yellow topaz, crystal, rose quartz, amethyst, citrine, cubic zirconia, joliet, aquamarine, emerald, garnet, blue sapphire, tanzanite, gold plated silver earrings with fresh water pearl and baroque pearl, light sterling silver pendants with precious and semi precious stones, semi precious and precious stone bead necklaces and bead strands, garments, 100% cotton, rayon, polyester, silk, viscose scarfs, stoles, sarongs, kaftans, 100%cotton block printed home furnishing like bedsheets, table cover, runner, mats, napkins, cushion covers, vanity bags, quilts, scrunches in cotton, georgette, polyester, satin, organza, cumin,cloves,cinnamon,cardamom ( green & black) black pepper ( powder & whole), red chillies (powder & whole), turmeric, nutmeg, rice, wheat and different.Export
This striking large vase makes a beautiful statement on any surface. Crafted from durable ceramic, its intricate floral design is accentuated with a silver and gold plated finish. Standing over 12 inches tall with a wide base for stability, it has ample capacity to showcase voluminous fresh or silk floral arrangements. The curved handle provides a graceful accent and makes transporting the vase easy. Whether as a centerpiece or decorative accent, this vase will add luxury and sophistication to your home decor. Its timeless design will complement both traditional and modern styles for years to come. Hand wash only.
Products name :Factory direct sale with good quality cutomized 20*20mm aluminum extrusion profile Material :aluminium alloy Surface treatment:Mill finish,anodizing,polishing,powder coated,wood grain, etc The option of profile:10/15,20, 30, 40, 60, 80, 90,100,3060 8840 4080 etc series Slot of width :6mm, 8mm, 10mm Color:Silver,bronze,black,gold,blue,grey,champagne ,etc Deep processing :Cutting, drilling, punching, bending etc Certification:ISO9001 Shipping Term:By express ,by sea or others can be discussed.
Products name :Factory direct sale with good quality cutomized 20*20mm aluminum extrusion profile Material :aluminium alloy Surface treatment:Mill finish,anodizing,polishing,powder coated,wood grain, etc The option of profile:10/15,20, 30, 40, 60, 80, 90,100,3060 8840 4080 etc series Slot of width :6mm, 8mm, 10mm Color:Silver,bronze,black,gold,blue,grey,champagne ,etc Deep processing :Cutting, drilling, punching, bending etc Certification:ISO9001 Shipping Term:By express ,by sea or others can be discussed.
