NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
Tropical and exotic hardwoods **tzalam**: durable and richly colored. **machiche**: strong and pest resistant. **chechen**: hard and visually striking. **parota**: ideal for making slabs for tables, conference rooms, and staircases. suitable for dining slabs and high end office furniture. **pucte**: dense and stable. **zapote**: aesthetic and workable. **granadillo**: veneer quality, logs available 35 cm++ x 3.5 m long and longer. **lignum vitae**: extremely hard, used for making billiard cues, virtually indestructible flooring, boat bearings, turbine bearings for power generation, and other high durability applications. **katalox**: deep color and strength. **chactekok**: red hard color and unique grain. **chacteviga**: resilient with distinctive orange color..
Carbon Black: Carbon black is a fine black powder made by burning hydrocarbons in insufficient air. It's primarily used as a pigment and reinforcing agent. N660: The N660 designation refers to a specific grade of carbon black produced by the company Continental Carbon and is standardized for particular applications. It is one of the standard grades used in the industry. **2. Physical Properties: Structure: N660 carbon black typically has a medium surface area and structure. It has a high surface area (approximately 70-100 m/g), which contributes to its reinforcing properties. Particle Size: The particles are relatively large compared to some other carbon black grades, which affects its reinforcement and coloring properties. Color: It's characterized by its deep black color. **3. Applications: Rubber Industry: N660 is commonly used as a reinforcing agent in tires and other rubber products. It improves the strength, durability, and wear resistance of rubber products. Plastics Industry: It is used in plastics to enhance strength, UV protection, and color. Coatings and Inks: It�¢??s also used in inks and coatings to provide black color and improve their durability. **4. Performance Characteristics: Reinforcement: Provides good reinforcement properties in rubber products, improving tensile strength and resistance to wear. Dispersion: Offers good dispersion characteristics, which is important for achieving uniform properties in rubber and plastic formulations. Coloring: Provides a deep, consistent black color in various applications. **5. Manufacturing Process: Production: Carbon black N660 is produced through the incomplete combustion of hydrocarbons, typically in a controlled furnace. The process involves varying the amount of air and fuel to achieve the desired properties. **6. Regulatory and Safety Information: Safety: As with other forms of carbon black, N660 should be handled with care to avoid inhalation or prolonged skin contact. Safety data sheets (SDS) should be consulted for handling and safety procedures. **7. Comparison with Other Grades: Compared to Other Grades: N660 is intermediate in terms of surface area and structure compared to other carbon black grades. It is less reinforcing than some high-structure grades (like N110) but offers better performance in terms of dispersion and color compared to lower-structure grades.
Carbon Black N339 is a grade of carbon black distinguished by: Surface Area: Medium, generally around 30-40 m/g. Particle Size: Coarser compared to higher surface area grades. Applications: Primarily used in rubber products, including tires, where it provides moderate reinforcement and good wear resistance; also used in plastics and coatings. Properties: Offers balanced reinforcement and dispersion with a solid black color. It's selected for applications where a combination of strength and cost-effectiveness is needed.
Carbon Black N220 is a specific grade of carbon black known for: Surface Area: Medium to high, typically around 70-100 m/g. Particle Size: Larger particles compared to some other grades. Applications: Primarily used in rubber for tires, offering enhanced reinforcement, durability, and wear resistance; also used in some plastics and coatings. Properties: Provides high reinforcement and strong dispersion with a deep black color. It's chosen for its excellent balance of strength and performance in demanding applications.
Carbon Black N330 is a grade of carbon black characterized by its: Surface Area: Medium, typically around 40-60 m/g. Particle Size: Medium-sized particles. Applications: Used primarily in rubber for tires, providing reinforcement, durability, and wear resistance; also used in plastics and coatings. Properties: Offers good reinforcement and dispersion, with a deep black color. It's valued for its balance of performance characteristics, including strength and color.
Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear Itâ??s A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. Itâ?? S Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. Itâ??s An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 ± 100r / min 6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
K1270 Rail Cutting Machine 1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 �± 100r / min 6. Grinding wheel size: �? 350 �? 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
Code: SWC-JKFR 701 MATERIAL: Pyrovatex treated 100% Cotton. INTERNATIONAL STANDARDS:EN 11611, EN 11612, EN 61482, NFPA70E. COLORS:Navy Blue, Royal Blue, Red, Orange, Yellow, Turmeric Yellow, Khaki. SIZE - XS,S,M,L,XL,2XL,3XL,4XL,5XL,6XL FEATURES: High collar Two flap pockets on chest Two way concealed Industrial Grade (Brass/Nylon) zip fastening. Two pockets on sides of the jacket Pen pocket on left sleeve Elasticized waist Reflective tapes on shoulders and arms Side Vents Adjustable FR Velcro cuffs opening Bartacking done in places where more strength is needed to support extra load.
Product Description K1270 Rail Cutting Machine 1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 ± 100r / min 6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 ± 100r / min 6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
As a leading exporter of Dragon Fruit, we take pride in delivering the highest quality product to our customers worldwide. This sweet, juicy, and exotic fruit is high in antioxidants and fiber, making it a tasty and healthy addition to any diet. Whether you're looking to add some color to your fruit basket or impress your guests with a unique dessert, our Dragon Fruit is the perfect choice. Color: red skin, white flesh or red flesh, black seed. Type: Whole S: 300 380g / piece M: 381 460g / piece L: 461 600g / piece Number of broken ears: 3 ears/piece, ears are green to yellow-green, bright green. Packing: Pack each dragon fruit in a plastic bag then put it in a sturdy carton box, 16-24 piece per carton.
Technical Parameters Work table Size (LxW): 400x680 mm; Travels of X/Y axis: 400x500 mm; Cutting height: 500 (customized) mm; Speed of diamond wire: 0-50 m/s; Diameter of diamond wire: 0.7/2.5 mm; Best surface roughness: Ra0.8 u.m Pulse equivalent: 0.001 mm; Feed speed: Controlled and regulated by computer software (Graphite:5-15cm/min, height:70cm. Graphics machining accuracy:�?10postive and negetive0.05mm ) ; Noise: less than 60 dB; Tension control: Pneumatic adjustment ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 400 kg; Machine weight: 1500 kg; Overall dimension (LxWxH): 1350x1760x1600 mm;
Code: SWC-KFR- 1002 MATERIAL: IFR - 93% Metaramid with 5% Para Aramid and 2% antistatic fiber. INTERNATIONAL STANDARDS: EN 11611, EN 11612, EN 61482, Garment Certified NFPA 2112, NFPA70E COLORS: Navy Blue, Royal Blue, Red, Orange, Yellow, Turmeric Yellow, Khaki. SIZE - XS,S,M,L,XL,2XL,3XL,4XL,5XL,6XL FEATURES: Flat coat collar Two flap chest pockets with snap buttons. Pen pocket on left sleeve Two back pockets, one with flap Tool pocket on right leg Two trouser pockets. Elasticized back. Hanger loop on collar Concealed snaps on cuffs and ankle openings Concealed two-way heavy duty FR brass zip with brass snap closure. FR Reflective tape on arms and legs. Bartacking done in places where more strength is needed to support extra load.
Code: SWC 3011 Material: 100% cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar One flap pocket on left side of chest Pen pocket on left sleeve â?? Two flap pockets on the lower side of shirt Two trouser pockets Elasticized waist on trousers Hanger loop on collar Reflective tapes on arms, legs and over the chest/shoulder. Piping done on collars and pockets. Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Code: SWC 3005 Material: 100% Cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Flat coat collar Two cut pockets on chest with concealed heavy duty industrialgrade (brass/Nylon) zip fastening. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Side vents Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Code: SC 1103 Material: 100% Cotton OR Cotton & Polyester Blend. SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar Two flap chest pockets with snap buttons. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Hanger loop on collar Two trouser pockets Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Women's T-shirt color blue fabric density 190 grams, kulir, cotton We offer oversized and loose, straight-fit T-shirts (men's and women's). We sew the following sizes: 2XS, S, M, L, XL, 2XL. Available colors: white, milky, black, khaki, grey, flint, blue, blue, yellow, red, pink, etc. Fabric density: 190-200 grams. Fabric composition: 100% cotton. We produce both basic T-shirts and T-shirts with prints (thermal film). If necessary, we can send you samples to assess the quality of the fabric and tailoring. If something interests you, write. We are ready to discuss mutually beneficial conditions for cost, payment and delivery.
