ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE HIGHLIGHTS SB111 C44300 material has the following benefits: Durability â?? The structure and chemical composition of an SB111 C44300 make it durable. This kind of ASTM B111 tube can last up to 10 years, depending on where you are using them and the frequency of use. WHAT IS THE DIFFERENCE BETWEEN SB111 C44300 TUBE AND THE SB111 C70600 PIPE? The main difference between the SB111 C44300 tube and astm b111 c70600 lies in the material composition and their specific applications. Here are the key distinctions: SB111 C44300 AND C70600 MATERIAL COMPOSITION: SB111 C44300 Tube: C44300 is a copper alloy pipe known as Admiralty Brass, which primarily consists of copper (Cu) with small amounts of zinc (Zn) and trace elements. It is a non-ferrous alloy with good corrosion resistance and excellent thermal conductivity. SB111 C70600 Pipe: C70600 is a copper-nickel alloy known as 90/10 Copper-Nickel, which contains approximately 90% copper (Cu) and 10% nickel (Ni). It also includes small amounts of other elements such as iron (Fe) and manganese (Mn). This alloy offers high resistance to corrosion, particularly in marine environments, and has good mechanical properties. C44300 and C70600 tubes Applications: SB111 C44300 Tube: C44300 tubes are commonly used in heat exchangers, condensers, and other applications where efficient heat transfer and resistance to corrosion are required, such as heat exchanger pipes. They are suitable for use in both freshwater and seawater environments. SB111 C70600 Pipe: C70600 pipes, due to their excellent corrosion resistance, are widely used in marine applications such as seawater cooling systems, shipbuilding, and offshore installations. They are specifically designed to withstand the harsh conditions of saltwater environments. C44300 and C70600 Mechanical Properties: SB111 C44300 Tube: Admiralty Brass (C44300) has good formability, making it easy to bend and shape during installation. It possesses moderate strength and can handle moderate pressures and temperatures. SB111 C70600 Pipe: 90/10 Copper-Nickel (C70600) has higher strength compared to Admiralty Brass. It exhibits good mechanical properties, including high tensile and yield strength, making it suitable for applications requiring higher pressure and temperature ratings. It is important to consider the specific requirements of the application, including the operating conditions, fluid characteristics, and corrosion resistance needed, when selecting between the SB111 C44300 tube and the SB111 C70600 pipe. Consulting the appropriate specifications and guidelines for the intended use is crucial to ensure the optimal choice of material.
Product Name: Caustic Soda Chemical Name: Sodium Hydroxide Chemical Formula: NaOH CAS Number: 1310-73-2 Description: Caustic Soda, also known as Sodium Hydroxide, is a highly versatile and widely used chemical with strong alkaline properties. It is commonly available in solid form (flakes, pearls, or pellets) and in aqueous solutions. Caustic Soda is essential in numerous industrial processes, including chemical manufacturing, water treatment, and cleaning applications. Appearance: Caustic Soda typically appears as white solid flakes, pellets, or a colorless solution. It is odorless and highly caustic, capable of causing severe chemical burns. Key Features: Strong Alkalinity: Highly effective in neutralizing acids and dissolving organic materials. Versatile Use: Widely used across various industries for its chemical reactivity and cleaning properties. Highly Soluble: Easily dissolves in water, forming a strongly alkaline solution. Efficient Cleaning Agent: Removes grease, oils, fats, and other organic materials efficiently. pH Adjustment: Commonly used for pH regulation in various processes. Applications: Chemical Manufacturing: Production of various chemicals including detergents, soaps, and synthetic fabrics. Manufacture of paper and pulp. Production of aluminum through the Bayer process. Water Treatment: pH adjustment and water purification. Removal of heavy metals and other contaminants. Textile Industry: Textile processing and dyeing. Mercerization of cotton. Cleaning and Detergents: Industrial cleaning agents. Household drain cleaners. Food Industry: Food processing and preparation. Used in peeling fruits and vegetables, processing cocoa and chocolate, and making caramel. Technical Specifications: Purity: 99% min Sodium Carbonate: 0.5% Sodium Chloride: 0.03% Iron Content: 20 ppm Appearance: White solid (flakes/pearls) or colorless solution Packaging: Caustic Soda is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 250 kg Drums Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Our CNC turning precision parts are mechanically manufactured and mostly rotationally symmetrical parts that are produced by turning as a manufacturing process. Similarly, we speak of welded parts in welding, laser parts in laser cutting or milled parts in milling. DESCRIPTION OF CNC HARD TURNING What Is CNC Turning? CNC turning is a precise molding process that machines parts by â??turningâ?? a rod material. The rod is fed through to a cutting tool and then material is shaped into a finished product. In the process of making cnc precision turning parts, the cutter is normally fed through a rotating work piece and this rotating work piece typically uses a variety of different angles as well as many different tool shapes. CNC turning is generally used for creating turned metal parts that are symmetrical near their axis. For example a chess pawn would be a part that is symmetrical near its axis. The shapes that you can create using CNC turning vary greatly though and with the addition of other machining processes, the possibilities are endless! While most people use CNC turning to create turned parts that only utilize a single axis, it is also possible to use ones that have more than one axis. This allows for more flexibility. DISTINGUISHES OF TURNING PARTS What Distinguishes Our CNC Turned Parts? Part of our self-image is the continuous investment in our machinery. This is the only way we can guarantee the quality and precision in contract manufacturing for which our customers appreciate us. In the field of CNC turning (Computerized Numeric Control), we rely on automatic lathes and sliding headstock lathes. CNC long turned parts and precision turned parts on our CNC machines can be processed from 3 â?? 600 mm workpiece diameter and a maximum length of 2000 mm. For the production of individual parts or repair work in CNC turning, we also have conventional CNC lathes and automatic lathes with which we can machine turned parts up to a diameter of 400 mm and a maximum length of 1000 mm. If you need any kinds of precise molding, please contact us, as a professional precision molding company, Fangling is willing to offer you high quality products.
PRECISION PLASTIC INJECTION MOLDING Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part is fed into a heated barrel, mixed and injected into a mold cavity where it cools and hardens to the configuration of the cavity. Fangling Precision Plastic Mold Parts / Complete Molds Precision Mold Parts/Spare Parts With quality high precision mold parts, fast lead times, excellent customer service and support, Fangling will be your first choice of precision machining company. Precision Plastic Injection Molds/Tools We use durable materials like steel to create precise molding tools to manufacture quality products. We employ injection molding facilities for creating standard designs as per the client's demand. WHY CHOOSE FANGLING FOR INJECTION MOLDING? If you are looking forward to getting the ultimate injection molding service, then you must choose Fangling for obvious reasons. Why Choose Fangling for Injection Molding? Reputed Brand Fangling is a reputed name for providing the ultimate precision mold services, for saying the least. Latest Technology They use the modern and latest technology to cater to their customers with faultless molding service in the best way possible. They provide the best precision molded plastics for the job. Affordable Despite providing high-quality precision injection molding service as per the excellent industry standard, their service rates are decent and affordable. Other Perks and Benefits There are so many other perks and benefts that you are supposed to get from availing of their service. You should know about precision injection molding Inc. MATERIALS USED IN INJECTION MOLDING There are different kinds of materials used in making precision mold parts and injection plastic parts. Thermoplastics are most used in this regard. Not to mention, a hundred types of various thermoplastics are used in injection molding. INJECTION MOLDING PROCESS Precision injection molding is an effective manufacturing process that produces single parts and products utilizing different materials, commonly thermoplastic and thermosetting polymers. This method is used to manufacture different everyday plastic products such as chairs, bottle lids, telephones, toys, packaging, etc.
When a baby is stuffed up, the mucus from a baby's nose will affect their ability to breath, eat and sleep. Therefore, a infant aspirator is a baby must have item. The nasal aspirator for sale is compact and easy to carry. You can carry it whenever and wherever. And its detachable design is convenient for cleaning, while the anti-reflux design can prevent the mucus from back into the nose. Besides, this infant nasal aspirator uses high-quality motor to ensure low-voice, so that the baby can enjoy comfortable nasal cleaning experience in quiet environment. Is nasal aspirator useful? Nasal Aspirator First Nasal congestion in babies can be very stressful for babies, as babies may experience distress and feeding problems from a blocked nose. The impact on daily life can be disturbing, which can affect sleep patterns throughout the family. Second Thus nasal aspirator is a must-have device for every family prepared for their baby, which can help you safely and naturally clear out the unwanted fluid and mucous from babys nose. Third And its useful for you to use before the baby sleeps. It can help baby clearly breathe, easily feed and restful sleep. Fourth Besides, removing the excess fluid and mucus can help baby prevent further diseases, such as coughing, ear infections, and abdominal discomfort. After using, its easy for you to clean. How does baby nasal aspirator work? First Nasal aspirator is an efficient, safe and gentle way to remove the unwanted fluid and mucus from babys nose for clearly breathing, better sleeping and eating. Second When the motor provides suction, the tip of the nose enters the child's nose. Third These machines usually have a variety of suction settings to suit children of different ages. Fourth Usually, we recommend that parents should keep babys body flat, letting her chin tilt up slightly and put a few drops of normal saline in babys each nostril to liquefy secretions, then use the nasal aspirator. As a professional nasal aspirator supplier, JOYSTAR provides sterilizer and dryer, electric breast milk pump, breast feeding products, newborn nose cleaner, nasal suction, etc. For more, please feel free to contact us!
A Complete Guide To Gate Valve The gate valve is the most common shut-off valve. Unlike ball valves, they are not quarter-turn devices; instead, they close and open through revolutions of the hand wheel. Used in wastewater plants, power plants and process systems, the threaded system of the gate valves give them an advantage over the quarter turn system of the ball and butterfly valve in large applications. Fluid through gate valves experiences only minimal pressure drop as gate valves allow total flow through its passage when fully open. This post discusses the functions, symbols, advantages and disadvantages, types, and other essential things you need to know about the gate valve. What is A Gate Valve? Gate valves can also be called sluice valves or knife valves. They are control valves that allow or restrict the flow of media completely. Gate valves use a flat gate to close off flow between pipe flanges. A gate valve, being a full port valve, has an equal diameter to the pipe through which the fluid passes. Hence, unlike butterfly valves, gate valves minimise pressure losses in the fluid when fully open. Also, because of the equal pipe and valve diameters, gate valves allow for the movement of pigs within the pipe for cleaning and inspection operations. While butterfly valves can be used in flow regulation and on-off services, gate valves should only be used in on-off services as blocking valves and also to allow fluid flow. They should not be used in throttling. Because of their uncomplicated construction and capability to be used in different low-pressure applications, gate valves are one of the most common valves in the industry. Gate Valve Symbol The gate valve symbol is composed of two triangles meeting at a point. A vertical line is inserted between the triangles, and solid horizontal lines extend from the opposite sides of the triangle. The vertical line indicates the blocking operation of the gate valve, and the horizontal lines show that the valve has a two-way function in on-off applications. The gate valve symbol used in piping and instrumentation diagrams (P&ID) is a modification of the valve symbol, which is the gate valve symbol without the vertical line between the triangles. The three isometric symbols in the diagram indicate symbols for butt-welding end connections, flanged ends, and socket ends connections.
Payments:T/T, Western Union Delivery:2days for stock,OEM about 3-5weeks Origin:CHINA Packing:optical package Inspection:IL Samples:Charge Sample Price:$0.10 Remarks:www.unitedphtech.com United Photonics Technology UPT provides many kinds of high precision prisms, including Penta Prism, Beamsplitter Penta Prism, Right Angle Prism, and Corner Cube. Our micro Penta Prism and Right Angle Prism are widely used in optical communication, such as optical switches. Other kinds of prisms, such as Dove Prism and Roof Prism are also available upon request.product image Penta Prisms Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection o.. Read more product image Beamsplitter Penta Prism By adding a wedge and with partial reflective coating on first reflective surface, Penta Prism can be used as Beamsplitter.We supply Beamsplitter Penta Prism with standard Transmission/reflection (T/R.. Read more product image Wedge wedge prism can be used to bend a laser beam to a set angle. In tandem, these prisms can serve as an anamorphic pair for correcting the elliptical shape of diode outputs or steering a beam anywhere wi.. Read more product image Right Angle Prisms A right-angle prism is used as a mirror to deviate light through 90 degrees and also as a reflector to deflect light through 180 degrees by total internal reflection. Applications: Imaging Optical S.. Corner Cube Retroreflectors Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surfa.. Read more product image Anamorphic Prisms With a anamorphic prism, the beam size can be changed along the axis while leaving the beam unchanged along the other axis, so the beam can be expanded, reduced or reshaped. Anamorphic prisms are use.. Read more product image Dove Prisms The Dove Prism is also called Image Rotator. The prism rotates the image without changing the direction of the input beam, which is parallel to hypotenuse. Rotation of the prisms in relation to the su.. Rhomboid Prisms Rhomboid prisms (off-set prism) are commonly used to displace a laser beam without changing its direction. In imaging applications, rhomboid prisms will displace the optical axis without inverting the.. Read more Reflection Prism The reflection prisms are usually used for diverging the ray or for changing image location in relation to the subject (rotation, inversion). All the surfaces of the reflection prisms are flat. Reflec..
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
Copper tubes come in various grades, each with specific properties suited to different applications. The most common grades of copper tubes include: ASTM B88 (Type K, L, M): Type K: This grade of copper tube has thick walls and is typically used for underground water services and distribution. Type L: Type L copper tubes have medium thickness walls and are commonly used for residential water supply lines, refrigerant lines, and heating systems. Type M: Type M copper tubes have thin walls and are suitable for general residential and commercial plumbing applications where pressures are relatively low. ASTM B280: ASTM B280 copper tubes are seamless, drawn-copper tubes used for refrigeration and air conditioning systems, as well as in heating applications. These tubes are available in various tempers, such as annealed (soft) and drawn (hard), to suit different installation requirements. ASTM B75 (Type K, L): Type K: Similar to ASTM B88 Type K, these tubes have thick walls and are commonly used for underground water services and distribution. Type L: Similar to ASTM B88 Type L, Type L tubes have medium thickness walls and are suitable for residential water supply lines and refrigerant lines. ASTM B88 (Type ACR): ACR (Air Conditioning and Refrigeration) copper tubes are specially designed for use in air conditioning and refrigeration systems. These tubes are typically annealed for ease of bending and are available in various sizes to accommodate different system requirements. ASTM B819: ASTM B819 copper tubes are seamless copper tubes specifically designed for medical gas systems. These tubes are cleaned and capped to meet stringent purity requirements for medical gas applications. Copper-Nickel Alloys: Copper-nickel tubes, such as CuNi 90/10 (90% copper, 10% nickel) and CuNi 70/30 (70% copper, 30% nickel), offer excellent corrosion resistance and are commonly used in marine and offshore applications, as well as in heat exchangers and condensers in aggressive environments. These are some of the commonly used grades of copper tubes. The selection of the appropriate grade depends on factors such as application requirements, operating conditions, and regulatory standards. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
Xiongcai XC303 Motor Controller Provides Equivalent Performance to Stryker's Products Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise and solution. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller and find replacements to Stryker6/7/8 for his maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not match precisely. The distance of triggers is not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. it's not sophisticated, but it needs profession, not only technology, but also service. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Kesen, Unicent and more. Contact us and have a try, or google Shenzhen Xiongcai Technology, we will deliver efficient solution to you according to your ideas.
Brown Oxide Pigment Iron Oxide Brown, also known as Ferric Brown or Brown Oxide Pigment, is a synthetic inorganic pigment with a brown color. Like other iron oxide pigments, it is composed of iron and oxygen, specifically iron(III) oxide, which gives it its brown hue. This pigment is commonly used in various industries for coloring and various applications. Physical properties Strong covering power and coloring power, very stable to light and atmosphere, insoluble in alkali, slightly soluble in acid, completely soluble in concentrated acid, poor heat resistance, easy to oxidize to iron-red above 100â??, the product color ranges from light coffee to dark coffee, the product color is soft. Some common uses of Iron Oxide Brown include Paints and coatings: It is added to paint formulations to achieve a brown color. This can be seen in a range of applications, such as house paints, industrial coatings, and artistic paints. Construction materials: Iron Oxide Brown is used to color concrete, mortar, and other construction materials, giving them a brown tint. This is especially useful in architectural and decorative concrete applications. Plastics: In the plastics industry, Iron Oxide Brown can be employed to provide a brown color in products like PVC, plastic packaging, and various plastic items. Ceramics and pottery: It is used in the coloring of ceramics, pottery, and glazes, helping achieve earthy and brown tones in ceramic products. Inks and pigments: It is utilized as a coloring agent in the production of inks and pigments for various applications, including printing inks, artists' paints, and coloring agents for a wide range of materials.
Glassine Release Paper Name Glassine Release Paper Color White & Yellow (other colors can be customized with MOQ 100 Tons) Material 100% Wood Pulp Substance 40g, 55g, 60g, 80g, 90g, 100g, 120g Size in sheet or in roll, size can be customized core 3 inches, outter diamter around 1.1 meter (can be customized) Packing PE film wrapped, 4 angles protector, baled on strong wooden pallets Load qty 13-16 tons per 20FT; 25 tons per 40FT Features of adhesive release paper 100% virgin pulp, high printing gloss, resistance, strong explosion resistance High temperature resistance, moisture resistance, oil resistance PH neutral and acid free ISO 9001:2000, ISO14001:2004, SGS, F SC ARE ALL AVAILABLE Recyclable and biodegradable Application of silicone coated kraft paper Glassine kraft release paper can be used for paper stickers and is widely used for high-speed automatic labeling (especially for high-speed label application), logistics labels, medical plasters, adhesive films, electronic die-cutting, adhesive stickers, special tapes, double-sided tape base materials, trademarks, laser anti-counterfeit labels, and other applications. For more information about silicone release paper uses and release paper meaning, please feel free to contact us! There are many release paper manufacturers, but we are one of the best choices for you. ou are looking for a reliable golden paper company, don't hesitate to contact us!
Construction machinery floating seals, also known as mechanical face seals or duo-cone seals, find various applications in construction machinery to provide effective sealing and protection in challenging environments. Here's how floating seals are used in different construction machinery applications: Tunnel Boring Machine (TBM) wheel loaders floating seals used in Tunnel boring machines are essential in the main drive and cutterhead assembly of tunnel boring machines. Floating Seals for Cutter Rollers prevent the ingress of abrasive materials, slurry, and water into the cutterhead bearings and drive components, ensuring the efficient and reliable operation of TBMs during tunnel excavation. Twin Shaft Concrete Mixer/Stirrers/Rollers Floating seals are used in the gearboxes and drive systems of concrete mixers, stirrers, and rollers to protect against dust, water, and concrete residue. These seals help maintain the longevity and performance of these construction machinery components, critical for producing high-quality concrete and achieving smooth construction operations. Articulated Dump Truck In articulated dump trucks, floating seals are employed in wheel hubs, axles, and other critical components to prevent the entry of contaminants like dirt, mud, and debris. Duo Cone Floating Seal For Articulated Dump Trucks contributes to the durability and efficiency of these trucks, especially when operating in rough terrains and construction sites. Gearboxes Floating seals are commonly used in gearboxes across various construction machinery types, including excavators, bulldozers, and road headers. Floating seals for gearbox maintain the integrity of gearboxes by sealing them against external contaminants and lubricating oil leakage. Boom-Type Road Header Floating seals are crucial in boom-type road headers to protect gearboxes, cutterheads, and other drive components from abrasive materials encountered during tunneling and excavation. These seals extend the life of road headers and minimize maintenance requirements. Bulldozer Bulldozers often use floating seals in critical areas such as track rollers, idlers, and final drives. Bulldozer floating seal groups protect components from dirt, rocks, and debris, ensuring the bulldozer's performance and reducing downtime.
Top Supplier of High-Quality Dried Chicory for Multiple Industries Dried chicory has become an essential ingredient across various industries, from the coffee sector to pet food and even medicine. Our company takes pride in being one of the most reliable suppliers of dried chicory, delivering top-quality products Both locally and internationally. How We Produce the Best Dried Chicory We start by harvesting fresh chicory from our farms, ensuring the roots are in perfect condition. These roots are then cut into equal portions using advanced machinery in our processing unit. Once prepped, we carefully dry them in a controlled environment to achieve the ideal texture, color, and Quality, tailored to your specific needs. Industries That Use Dried Chicory Dried chicory is valued for its versatility, with its roots commonly used in: Coffee Industry: It acts as a caffeine-free alternative or additive, giving coffee a rich, earthy flavor. Health & Wellness: The chicory root is Known for promoting digestive health, often featured in herbal remedies and supplements. Pet Food Manufacturing: It is a key ingredient in pet food, offering added nutritional benefits. Why Work With Us? As a top supplier of dried chicory from India, we ensure quality and reliability with every order. Whether you need bulk shipments or smaller orders, we provide a tailored service that fits your business. Our products meet international standards, making us a preferred choice across different sectors. Unmatched Quality and Competitive Pricing We offer dried chicory (machine-cut cubes) at a competitive price of USD 0.60 and dry chicory (hand diced) USD 0.71/kg per kilogram. Our efficient production process guarantees the best value for your investment without compromising on quality. Conclusion If you're in the market for premium dried chicory, you've come to the right place. We are a leading supplier committed to delivering the best product at a great price, whether you're in the coffee, pet food, or health industries. Reach out today more about how we can support your business needs.
The hard, fibrous, chemically inert, nontoxic, and biodegradable material known as walnut shell is utilized as a Loss Circulation Material in drilling applications. It is produced by grinding specialized walnut to specific sizes and can be utilized in fluid systems of various densities. In some cases, Walnut Shell (F/M/C) is utilized as a nut lubricant to enhance lubricity and decrease torque and drag.. Maintain consistent viscosity and suspension in your drilling mud using our viscosifiers. These additives are carefully formulated to provide stability, lubrication, and enhanced drilling performance. The use of WALNUT Shell as a material for controlling lost circulation in drilling fluids is a common practice in the oil and gas industry. It is highly effective in mitigating the loss of drilling fluids during the drilling process, which can result in significant cost savings. This material can be used alone in re-circulated fluids, or in combination with other materials such as fibrous and flake materials in pill form, to provide an even greater level of effectiveness in preventing lost circulation. In addition to its loss circulation control properties, WALNUT Shell is also utilized as a lubricant in drilling operations to increase lubricity and reduce torque and drag. This is achieved by applying the shell material to the threads of drill pipe and other tools used in drilling operations. The lubricating properties of WALNUT Shell help to reduce friction and heat buildup during drilling, thereby increasing the efficiency and safety of drilling operations. Overall, WALNUT Shell is a versatile material that has a wide range of applications in the drilling industry. Its unique combination of properties, including its hardness, fibrous nature, chemical inertness, non-toxicity, and biodegradability, make it an attractive choice for use in drilling operations.
Tetramethyldivinyldisiloxane SiSiB® PC9401 is a high purity 1,3-Divinyl Tetramethyl Disiloxane, it is a colorless to yellowish clear liquid. Technical Data CAS No. 2627 95 4 EINECS No. 220-099-6 Formula C8H18OSi2 Molecular Weight 186.40 Boiling Point 139°C [760mmHg] Flash Point 24°C Color and Appearance Colorless transparent liquid Density 25/25°C 0.818 Refractive Index 1.412 [20°C] Min.Purity 99% Application SiSiB® PC9401 is primarily used as an end-capper in the production of vinyl end-capped siloxane polymers. The vinyl end-capped silicone polymers can be used in a wide variety of end use applications such as silicone rubber, sealants, coatings and cosmetics. SiSiB® PC9401 is used as a linear inhibitor in the formulating of two-part Silicone RTV-2 Addition Curing systems. Because of the large vinyl content, small amounts are very effective in retarding and controlling the working time or pot life of two-part Addition-Curing RTV rubber silicones. Also, due to its boiling point of 139ºC, it is easily volatilized during curing. A suggested starting formulation is to use 0.25 to 0.50 parts by weight of SiSiB® PC9401 with 100 parts of the Base polymer containing the platinum catalyst. Packing and Storage SiSiB® PC9401 linear siloxane is supplied in 160Kg steel drum. In the unopened original container SiSiB® PC9401 has a shelf life of one year in a dry and cool place. There are many silicone oil suppliers, but we are one of the best choices for you.
Fly Ash MOQ : 1 Ton Business Type Exporter, Supplier, Trader Raw Material Cement Color Grey Condition Dry Preferred Buyer From Location Worldwide Product Details Form Powder Application Building Construction Type Fly Ash Country of Origin India At We Care, we provide the best fly ash in Meerut, Uttar Pradesh for your business. We are your trusted wholesale fly ash supplier in India. We take customer satisfaction seriously and endeavor to be among the best fly ash exporters. Unparalleled Quality As a reliable fly ash supplier in India, we source what we offer from reliable companies. We make use of the most up-to-date technology to meet the unique requirements of the market. With the application of our fly ash, you can count on the same performance any time you use it. Versatile Applications The fly ash that We Care supplies has multiple roles and can be used in various applications. In construction and many other sectors, you can rely on our fly ash as the perfect option for your project. Be it improving the soil quality or reinforcing concrete, trust us, as your fly ash exporters in India. Unbeatable Pricing At We Care, we acknowledge the pivotal role cost-effectiveness plays in your business operation. This is just the reason why we offer reasonable rates without compromising the quality of our fly ash. Be confident that we will provide you with the finest value for your money. Our team is highly committed to delivering quality at every step. Through the whole process, starting with the first inquiry, we will be at your service to help you. Whatever service you may needâ??product selection or logisticsâ??we will be your reliable partner at all times. Call us now to learn more about our fly ash solution.
Chlorosulfonation Polyethylene Anticorrosive Primer Chlorosulfonated polyurethane paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint. The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance. This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools. Advantages OF Chlorosulfonation Polyethylene Primer Excellent corrosion resistance Good resistance to water, acid, alkali and chemicals. Good adhesion to all kinds of substrates Specification of Chlorosulfonation Polyethylene Anticorrosive Primer Type Solvent Solid Content 46% Mixing Ratio two components Part A: Part B=10:1 by weight Dry Film Thickness 50m per coat Specific Gravity 1.15kg/Liter Coverage Rate (Theoretical) 0.14kg/m2/50m 0.122L/m2/50m Drying Time Temperature 5 10 20 30 Dry to touch 30mins 20mins 15mins Dry Hard 5hrs 3.5hrs 3hrs Package 22kgs for one kit, part A 20kgs, part B 2kgs Where are the chlorosulfonated polyethylene coatings mainly used? It is mainly used for equipment, facilities, pipelines corroded by the chemical atmosphere, and storage tanks and equipment corroded by acid, alkali, and salt. It can also be used for water-proof facilities such as reservoirs, water tanks, and sewage pools. As a paints manufacturer, we will do our best to meet all the needs of customers.
ECO 9MM SNOW CHAINS ECO 9mm snow chains with D3x2.5mm section are ideal for cars with tight clearance. Front-wheel drive and rear-wheel drive are both suitable. TUV/GS & ONORM V5117&EN16662-1 approval. BRAND: SURECHAIN ECO 9MM SNOW CHAINS SPECIFICATIONS Size D3X2.5mm Material Case-hardened high-quality alloy steel Pattern Symmetrical diamond pattern chain Use Easy and light to mount and demount Performance Satisfactory traction 9MM VS 12MM SNOW CHAINS When it comes to choosing between 9mm snow chains and 12mm snow chains, there are a few things to consider. Firstly, the main difference between these two sizes is the thickness of the chains. 9mm snow chains are generally considered to be "light-duty" chains, suitable for occasional use in light snow and ice conditions. They are lighter and more compact than 12mm chains, making them easier to store and install. 12mm snow chains, on the other hand, are considered to be "heavy-duty" chains, suitable for more frequent use in heavier snow and ice conditions. They provide better traction and durability than 9mm chains, but they are also heavier and bulkier, making them more difficult to install and store. When choosing between 9mm snow chains and 12mm snow chains, it's important to consider the conditions in which you will be driving. If you only anticipate needing chains for occasional use in light snow, 9mm chains may be sufficient. However, if you expect to be driving in more severe winter conditions or on steeper roads, 12mm chains may be a better choice. Ultimately, the best choice of quality snow chains will depend on your specific needs and driving conditions. It's important to carefully consider your options and choose to buy car chains that will provide the best combination of traction, durability, and ease of use.
Buna-N Rubber Products Buna N rubber products can take different forms, including sheets, seals, gaskets, o-rings, and molded parts. These products are manufactured using processes such as extrusion, compression molding, or injection molding. Features of Buna N Synthetic Rubber Products Buna-N rubber sheets are commonly used in applications that require resistance to oil, fuel, and solvents. They are found in gaskets, seals, or as protective linings for tanks, pipes, and conveyor belts. Buna-N rubber sheets offer excellent mechanical properties, making them suitable for applications in industries such as automotive, oil and gas, and chemical processing. Buna-N rubber seals and gaskets are used to create a reliable and leak-proof seal in mechanical systems, such as pumps, valves, and engines. They provide resistance to various chemicals and can withstand high pressures and temperatures. Buna rubber o rings are commonly used in hydraulic and pneumatic systems to seal connections and prevent leakage. They have excellent sealing properties, even in demanding environments involving oils, fuels, and hydraulic fluids. Molded Buna-N rubber parts are used in various applications, such as vibration mounts, grommets, and diaphragms. These parts offer flexibility, durability, and resistance to wear and tear, making them suitable for challenging industrial environments. Buna N rubber o ring products have a good balance of mechanical properties, including toughness, elasticity, and durability. They excel in applications that involve oils, fuels, and chemicals. However, they may have limitations when exposed to ozone, sunlight, and some polar solvents.