Introduction M13035 | Rosin Modified Maleic Resin is an irregular transparent, light color solid, getting from esterification of maleic rosin adduct and polyols. Properties It can dissolve in ester, non-alcohol solvents (toluene, xylene, butyl acetate, ), turpentine oil, insoluble in alcoholic solvents; partially soluble in petroleum products; mix well with plant oils; light color; resistant to yellowing; heat resistant; good adhesion power. Applications For improving of paint films in hardness, glossiness, rubbing property for polyesters, nitrocellulose and PU paints. Packing and Storage Pellet, 25 kgs bag. Dry and cool storage. Avoid oxidant environment.
THERMOPLASTIC ELASTOMER (TPE) GLOVES - Embossed Outside - Powder - Made with POLYETHYLENE Paste Resin - Standard Cuff - Clear & Blue Color - Ambidextrous
Renewable energy, hardwood charcoal, coconut charcoal,sawdust charcoal and wood pellet, resin product, damar batu, gum copal, gum damar and gum rosin , spices, clove, cubeb, long pepper, cinnamon, gambier, nutmeg and mace.
Erythromycin is a representative antibiotic of the macrolide system produced by Streptomyces erythropolis. The clinical application has been widened in recent years. In addition to the traditional application of anti-partial Gram-negative bacteria, the development of new dosage forms (such as erythromycin enteric-coated pellets) has also greatly increased the amount of erythromycin raw materials. The erythromycin extraction resin provided by Suzhou Bojie Resin Technology Co., Ltd. can selectively adsorb and extract erythromycin, which has fast adsorption speed, high mechanical strength, strong anti-organic pollution, long service life and no erythromycin. Secondary pollution (such as pigment), the best effect of eluting erythromycin with lipid eluent, high elution rate, minimum erythromycin pigment content eluted, regenerated resin can be used repeatedly, high economic benefit .
C5&C9 Copolymer Petroleum Hydrocarbon Resins for adhesive Majored in producing the modified C5 hydrocarbon resins,one kind of low-molecular polymeric substance of thermo-plasticicity, taking advantage of the polymeric C5 resin and the polymeric C9 resin , and being in nice compatibility with many more kinds of polymeric compounds and thermoplastic elastomers, especially with EVA / SBS / SDS . It provides not only better initial viscosity, but also promotes viscosity durability and adhesive strength in the bonding agents and copolymer resins, which is as well as the rosins. Commodity:petroleum resin 1.Spec.: (C9/C5) Color (in 50% Toluene) No. 9-18 Soften Point (DC) 80-90;100+/-5;110+/-5;120+/-5;130+/-5;over 130 Acid value (mgKOH/g) 0.5max Iodine value (g I2/100g) 60-120 Ash value 0.1% max. PH value 6-8 C5 Color (in 50% Toluene) No.5-9 Soften Point (DC) 80-90; 90-100; 100-110; 110-120 Acid value (mg/KOH/g) 0.5% max. Iodine value (g I2/100g) 20/120 Ash value 0.1% max. 2. Package : 25Kg/bag or as Customer’s request 3.Useage : C9 : 1).Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating ; 2). Rubber treatment: Used as adhesion booster; 3). Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue; 4). Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink; 5). Paper making industry: Used in paper sizing agent;6). Other application; Used as oil field water treatment agent & slurry additives, pitch modified agent. C5: 1). Road marking paint: It can improve on the brightness, bonding, water and weather resistance and may perfection for the dispersing and drying of any pigments; 2). Rubber: It goes compatible with both natural and synthetic rubber and characterized as adhesive, softening and reinforcement, it functions as an ideal for manufacturing of tyres and processing of any rubbers; 3). Adhesive: It is compatible well with high polymerization based substances, and is characteristic of excellent and stable bonding and heat resistance and changes retardant with both time and temperature.
Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers For specification, price and other details please contact us.
Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers. For price, specification and other details please contact us
We can supply - hydroperoxides, peresters, peroxycarbonates, diacyl peroxides, ketone peroxides, dialkyl peroxides and perketals as Trigonox, Butanox, Laurox and Perkadox. Major applications are: Initiator for the production of thermoplastics such as PE, PVC and EPS. Curing agent for thermoset resins Crosslinking agent for elastomers and thermoplastics. Modifying agent for polymers such as polypropylene Reagent in pharmaceutical synthesis For price, specifications and other details please contact us.
Request an online quotation for Recycled Resins via our website at indevcogroup.com/plastics-converting/recycled-resins/ Recycled industrial waste in pellet shape with colors ranging from natural to dark grey and can be used for the blown film, cast sheet, injection, and blow molding. We manufacture as well Plastic Additives, White/ Black/ Color masterbatch, and compounding resins.
Charcoal is the most basic fuel in the world of cooking. Charcoal refers to wood that has been burned but not yet fully burned Wood charcoal is charcoal made from wood base material. Wood charcoal is mostly used for cooking purposes as described previously. While the other use of charcoal is as a water purifier, use in the field of health, and much more. The wood material used to make charcoal is a healthy wood. Wood charcoal is charcoal made from wood. Wood charcoal is mostly used for cooking purposes as previously described. While the other uses of wood charcoal are as a water purifier, use in the health sector, and much more. The wood material used to make wood charcoal is wood that is still healthy, in this case the wood has not rotted.
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed Properties Good Dimension Stability High Impact Strength Good Heat Aging Properties Low Density Good Chemical Resistance Good Processability Low Cost Extensive Compounding capabilities Good Recyclability Non-hygroscopic, pre-drying is not necessary Coloured grades available Typical Applications Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs Industrial products- gasket & seal, weather striping etc. Appliance and housewares Products Sporting goods Personal Care goods Wire and cable Flexible cord, welding cable jacket , automotive wire & cable Health care Specification missing -take from website Specification Hardness Set(ISO 868) (Shore A-D) 50 �??-60 D Density (g/cm3) 0.88 1.12 Compression(Set) Very Good Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3 Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3 Elongation Set (ISO 527) (%) 400 - 1000 Working Temp. Max. (C) 100 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Medium Acid-Base Resistance Excellent UV-Ozone Stability Excellent Wide hardness range Does not require vulcanisation-quire higher saving on the processing costs Remains flexible at low temperatures High temperature resistance Electrical insulator with very low conductivity Has grades with very low compression set Grades having excellent abrasion resistance Excellent tear resistance 100% recyclable PVC free Resistance to solvents Resistance to oil Resistance to acids bases and detergents Resistance to UV and ozone Resistance to bacterial and fungus growth Has low toxic potential, with many grades conforming with FDA regulations Halogen free flame retardancy (VO-V1-V2) Colored grades available Allows direct colouring during processing by utilizing PP or PE based color 2-shot molding onto wide range of plasics Suitable for co-extrusion process
We excel in all types of powder coatings for aluminium
RITVER is a Italian paints manufacturing in Dubai. Shield Emulsion is a strong silk washable coating for exterior and interior building walls that face heavy moisture/humidity, anti carbonation and salinity
RITVER is a Italian paints manufacturing in Dubai. Shield Emulsion is a strong silk washable coating for exterior and interior building walls that face heavy moisture/humidity, anti carbonation and salinity
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
We are an Exports of all types of Titanium Dioxide, ilmenite from China. Grades we have Description 1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method. 2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance. 3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry. 4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics. 5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings. 6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics. 7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers. 719 - General Grade 719T - Premium Grade 519 - Chloride Grade
Rigger Glove (RSP 1001)-YB : Natural Cow Split Leather (Brown) Back Color Cotton (Yellow) 3 Finger Tips Knuckle Strap Rubberized Cuff Color Piping on Edge (Yellow).
Rigger Glove (RSP 1001)-PC : Natural Cow Split Leather (White) Back Color Cotton (Printed Cotton) 3 Finger Tips Knuckle Strap Rubberized Cuff â?¢ Color Piping on Edge.
Rigger Glove (RDP 1001)-X : Palm made of Natural Cow Split Leather Back Color Cotton, Reinforcement on Palm, Thumb & Finger with Color Cow Split Leather Knuckle Strap Rubberized Cuff with Color Piping on Edge.
Rigger Glove (RDP 1001)-YB : Palm made of Brown Cow Split Leather Back Yellow Cotton, Reinforcement on Palm, Thumb & Finger with Brown Cow Split Leather Knuckle Strap
