Membrane covered optical CO2 sensor for monitoring Online determination of the dissolved carbon dioxide in water The measurement of dissolved carbon dioxide (excluding HCO3- and CO32-) in water is one of the most important parameters for water monitoring. AMT GmbH has developed now a new membrane covered optical CO2 sensor with titanium housing and other improved characteristics. So the new AMT-CO2 sensor is designed for depths of up to 1,000 m, has an analogue or digital output, a reduced current uptake and includes an automatic internal temperature compensation. The sensor is designed to be interfaced externally to CTD probe systems, to own measuring systems or as stand alone sensor. Main features of the Carbon Dioxide Sensor: - submersible direct reading sensor for natural and industrial waters and sea water - detects CO2 and total inorganic carbon when measuring additionally pH - no signal interferences to silicate, phosphate, HCO3- and CO32- - built-in reference measurement for superior stability - calibration coefficients stored internally - for depths of up to 1,000 m - less than 0.5 W power consumption - with analogue or digital output (please select) - with internal temperature compensation - compensation of humidity and other influences - heated sensor head to avoid condensation Technical data of the membrane covered optical carbon dioxide sensor: Measuring ranges: 15 mg/l, 50 mg/l, 340 mg/l and others on request (please select one) * Dimensions: 225 mm length, 33 mm diameter * Housing material: Titanium * Power consumption: < 0.5 W * Warm up time: < 12 seconds, < 2 minutes for full accuracy * Maximum deployment depth: 1,000 m/1,000 dbar * Available outputs: 4 - 20 mA, 0 - 5 V DC or digital output RS485
SH-300-NDC NDIR CO2 Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDC NDIR CO2 Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-NDC NDIR CO2 Sensor Module Technical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: ±2% FS, ±3 % measured value @0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @ 25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non-Condensing)
SH-300-DS NDIR Carbon Dioxide Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-DS NDIR Carbon Dioxide Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-DS NDIR Carbon Dioxide Sensor ModuleTechnical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0~3,000/5,000/50,000/100,000 ppm * Accuracy: ±2% FS, ±3% measured value @ 0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non Condensing)
SH-300-NDTH NDIR Carbon Dioxide Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDTH NDIR Carbon Dioxide Sensor Module Application * CO2 Control for IAQ * Building, Hospital, School * Air cleaner, Air conditioner * Mushroom control, Boiler control SH-300-NDTH NDIR Carbon Dioxide Sensor Module Technical Specification * Measuring Type: Non-Dispersive Infrared (NDIR) * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: FS ±2%, measured value±3% @ 0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: 0 ~ 50'C * Operating Humidity: 0 ~ 95%RH (Non Condensing)
AR8200 Carbon Dioxide Detector CO2 Detector Introduction This Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD. The product features: * As it uses the imported Carbon Dioxide sensor, it is very precise and its performance is stable. * It uses the intellectualized design and has gotten multiple functions. * With highlight backlight display and acoustic-optic alarming, it is easily configured. * The embedded temperature compensation can make the meter measuring the correct value in the environment temperature of -10~40C. * As its case is ergonomically designed, it looks handsome, feels good and is easy to carry. AR8200 Carbon Dioxide Detector CO2 Detector Applications: * Carbon Dioxide manufacturing workshop * Petroleum refining and petrochemical plants â?¢ Carbon Dioxide content detecting in trains and automobiles * Carbon Dioxide content detecting in minerals * Carbon Dioxide content detecting during mountain climbing and in sealed place * Other industries and plants using Carbon Dioxide. AR8200 Carbon Dioxide Detector CO2 Detector Technical Features * Gas Type: Carbon Dioxide (CO2) * Measuring range: 0 to 5000ppm * Resolution: 1ppm * Measuring Principle: Optics * Display:Large LCD Display * Operation Tempearture: -10C ~ 60C * Operation Humidity: 0 to 99.9% RH * Power supply: 3 x 1.5V AA battery * Size: 182*66*32(mm)
CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Introduction Single Beam(single light source, single wavelength) NDIR CM1106 (Miniature size) can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology(NDIR). It is widely used in IAQ monitor, air conditioner with purifying function, air purifier, ventilation system, automotive and other consumer electronic products etc. CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Features * Advanced non-dispersive infrared technology(NDIR) with independent intellectual property * High accuracy: temperature calibration within whole measurement range * High stability: advanced auto-calibration at background * Small size and compact structure, easy to install CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Application * IAQ monitor * Air conditioner with purifying function * Air purifier * Ventilation system * Automotive CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Specification * Measurement range: 0-2000ppm (extending to 5000ppm, 10000ppm) * Accuracy: auto-calibration within temperature and concentration range * Working temperature: -5'C~50'C * Storage temperature : -20'C~60'C * Working humidity: 0-95%RH (non-condensing) * Signal output: UART-TTL, PWM, IIC * Dimension: 33*19.7*8.9mm * Maintenance: Auto-calibration -
TS418-1N426 Thermopile Infrared Sensor SPECIFICATIONS * Thermopile IR-Sensor * Filter for NDIR CO2 Gas Detection * Single Element * Very High Signal * Flat Filter * Small Package * Accurate Reference Sensor TS418-1N426 Thermopile Infrared Sensor DESCRIPTION Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output. TS418-1N426 Thermopile Infrared Sensor FEATURES * Very High Signal * Accurate Reference Sensor * 4.26µm Narrow Band Pass * Small TO-18 package TS418-1N426 Thermopile Infrared Sensor APPLICATIONS * NDIR CO2 Gas Detection -
Product descriptionQT-CO2 meter is used to measure carbon dioxide by non-dispersive infrared induction principle, in the meantime it can measure temperature, humidity, dew point and wet bulb temperature. The meter is equipped with a large LCD display, and it has several characteristics, such as rapid response, visible light/sound alarm settings, low drift and high performance. Applications: Agricultural greenhouse Food processing Experiment teaching Industry and quality management Indoor air quality monitoring
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Summary NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. Based on GSS patented solid state IR sensor technology and innovative optical designs, MISIR is configured to meet the requirements of the HVAC and Demand Led Ventilation markets. Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Characteristic * Low Power 20mW * Measurement ranges from 0 to 1% * Low noise measurement
High speed carbon dioxide sensor ndir co2 sensor sprintir summary Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation. Fast, accurate carbon dioxide sensor The sprintir carbon dioxide sensor is the fastest, most accurate co2 sensor on the market. A breakthrough in ndir technology, the sprintir uses advanced solid state indium antimonide ledâ??s and detectors to offer a robust sensor with no moving parts, no heated filaments, and incredibly low power requirements. The sensor comes in four versions - from 0% to 100% - all capable of the same high-speed co2 measurement. This makes the sprintir especially useful in biological applications. * high speed sensing (20hz) * measurement ranges from 0 to 100% * 3.3v supply * low power requirement 35mw * flow through adaptor (optional) High speed carbon dioxide sensor ndir co2 sensor sprintir specifications Measurement range: 0-5%, 0-20%, 0-60%, 0-100% Accuracy: â±70 ppm +/- 5% of reading Measurement noise:
KL-1390S laser cutting machine is a widly used in the artworks and high precision products carving face design of aircraft, mainly reflected faster of the two high precision characteristics ,X-axis machines Y-axis stepper system imports three ??phase stepper motor ,all stainless cellular on floor platform ,Singapore optical system ,the circuit control system using DSP technology, a highly efficient and stable power supply switches, USB data transmission ,unit work more stable ,faster ,more precise its widely used in carving handicrafts , rubber hardcore sculpture , electronic products , sculpture ,photography images carving handicrafts , rubber hardcopy sculpture, electronic products , sculpture , photography images carving, sculpture ,etc. Model for carving high precision industries. Technical-parameters Machine model KL-1610D customizable Laser type CO2 hermetic and detached co2 laser tube Laser power 100W Engraving area 1600x1000mm Engraving speed 0-1500mm/sz Cutting speeds 0-800mm/s Repeating locating �0.05mm Moving system CNC, CNC controlling units Cooling mode water-cooling and protection system Working voltage 220 �10% 50HZ Whole power 1250w Operating temperature 0 ??-45 ?? Operating humidity 5%-95% Controlling software original Kilolaser software Graphic format supported BMP PLT AI DXF DST Size 2200*1600*1310 mm Gross weight 560kg Technical Parameter Model KL-1630B Working Platform Size 1600x3000mm Laser power 300w Laser type co2 sealed glass tube Controlling system RD6442(optional) Table Type Blade Work Table Exhaust Power 550W Fan Blowing Rate: 18m3/min Phase Current 3.5A Software Format Support CorelDraw,Photoshop,AutoCAD, etc Graphic Format Support AI, PLT,BMP, DXF, DST MaxCutting speed 300mm/s Max Engraving speed 500mm/s Repeated Positioning Accuracy �0.5mm Min.Cutting Character English Letter 2mm Max.Cutting Depth 0-25mm(its up to the material) Cooling type " Water Cooling" Working Temperature " 0-35 �C " Work Humidity 5-95% Working Voltage 220V/50Hz/6KVA Machine Size 2200x4000x1150mm Packing Dimension 2350x4100x1400m Netweight 1300Kgs Gross Weight 1500Kgs
The CDM7160 CO2 module uses a compact NDIR CO2 sensor, featuring excellent performance characteristics, including high accuracy and low power consumption. Two detector elements inside the module make absolute measurement possible. Every module is individually calibrated and is provided with both a UART and I2C digital interface. The CDM7160 module is designed for simple integration into a user's products. It can be used in a wide range of applications such as ventilation controls for the improvement of energy savings and to assure a good indoor climate. Features * Small size * Low power * High accuracy * Absolute measurement via dual sensors Application examples * Indoor air quality control * Fresh air ventilators * Air conditioners * Automatic fans and window openers Specifications (tentative) Product name: Carbon dioxide (CO2) sensor module Model No.: CDM7160 Detection range: 300 to 5,000ppm CO2 Operating principle: Non-dispersive infrared (NDIR) Power supply: 4.5 to 5.25V DC Current consumption: 60mA peak, 8mA avg. Accuracy: +/-(50ppm+3% of measurement) in the range of 300 to 5,000ppm CO2 Response time (T90): 2 min. (diffusion) Operating temperature range: 0 to 50'C Storage temperature range: -30 to 70'C Communication port: UART/ I2C (gas conc. output 0 to10,000ppm) Measurement interval: 2 sec. *TBD PWM output (1kHz): 0 to 100% duty cycle for 0 to 5,000ppm, CMOS output Dimensions: 32 x 17 x 7.4 (mm) Weight: approx. 3g
CDM4160 is a new unit which uses TGS4160, Figaro's durable solid electrolyte CO2 sensor. Due to Figaro's proprietary idea for signal processing with a microcomputer,no maintenance is required for this module. By application of DC voltage to the module, an analog output voltage proportional to CO2 concentration can be obtained. The module can generate a control signal based on a user-selectable threshold concentration. The features mentioned above make this module ideal for air quality control applications in homes, offices and factories as well as in the field of agriculture. Features: * High selectivity to CO2 * Long life * Maintenance free * Pre-calibrated * Low cost * Wide detection range * Excellent durability Applications: * Indoor air quality control in offices, homes, and factories * CO2 monitors * Agricultural applications
Water Cooled UV Curing Systems Shenzhen Lando Company supply for Portable Laser Water Chillers cooled uv led curing systems and Uv Light Curing Equipment.Our Water Chillers Systems which cooling light curing systems ,also our industrial laser water chillers would be application for cooler CO2 tube . UV LED Curing Water Cooled Performance : ?Application : UV LED Curing Water Cooled , UV Printer Chillers or other industrials . ?One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically ?switch to appropriate operating temperature. Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a Industrial Water Chillers Cool CO2 Laser Tube Main Feature: * Compact thermolysis type industrial water chiller * Long working life and simple operation * Equipped with water flow alarm and over temperate alarm * Radiating capacity: 50W / °C * CE and ROHS certified * Power supply: 110 V or 220 V * Multiple alarm functions: Compressor time-delay protection, compressor over current protection, water flow alarm and over high / low temperature alarm www.lando-chillers.com Email : sales@cnlando.com
Cheap co2 sensor for indoor air quality control / co2 monitor tgs4161 Model number: tgs4161 Features: * high selectivity to co2 * compact size * low dependency on humidity * long life and low cost * low power consumption Applications: * indoor air quality control * co2 monitors Description Tgs4161 is a new solid electrolyte co2 sensor which offers miniaturization and Low power consumption. A range of 350~10, 000ppm of carbon dioxide can be Detected by tgs4161, making it ideal for indoor air control applications. The co2 sensitive element consists of a solid electrolyte formed between two Electrodes, together with a printed heater (ruo2) substrate. By monitoring the Change in electromotive force (emf) generated between the two electrodes, it Is possible to measure co2 gas concentration. The top of the sensor cap contains adsorbent (zeolite) for the purpose of Reducing the influence of interference gases. Tgs4161 exhibits a linear relationship between demf and co2 gas concentration On a logarithmic scale. The sensor displays good long term stability and shows Excellent durability against the effects of high humidity.
Model name: KL-690 Laser power :,60 W(optional80W /100W) Laser tube life Span,1800 working/hours. Applicable Materials,Acrylic,Glass,crystal,wood,leather,cloth,rubber,marble,ceramic,etc. Working area:,500*700 mm Max moving speed:,1000mm/s Laser energy control:,1-100,G set by hand or software Worktable:,Electric up and down table/honeycomb table/Aluminum table(optional) Locating precision:,
Model: kl-320 Power:, 40w Working area:, 300*200mm Positioning accuracy:, 0.01mm Software:, coreldraw Panel:, digital panel Up-down table:, yes(the height of up-down distance is 60mm) optional Cellular platform:, no Engraving speed:, 1-500mm/s Engraving depth:, 1-3mm(acrylic) Cutting speed:, 1-30mm/s Cutting depth:, 1-5mm(acrylic) Air blowing protection:, , optional¡, Red-light position:, , optional¡, Led inside the box:, yes Warranty:, 1year, laser tube and lens 3 months¡, Color:, white and blue(optional) Voltage: , ac220&, ¤10% 50hz/ac110&, ¤10% 60hz Size:, 80*50*25cm Weight:, 28kg Packing: wooden box / international standard wooden packing Packing size: 96*69*48cm
Model Name: KL-350-50W 1.Applicable Materials Plastic,acrylic, jade, crystal, rubber,leather, organic glass and other non-metal materials. 2.Applicable Industry Mainly used for the engraving and cutting of little artistic works. Such as engraved portraits, badges, breast cards and various engraved packages. It can also engrave seals and crabs. 3.Technical Parameters Laser power : 45 W(optional) Laser tube life Span: 1500 working/hours. Applicable Materials: Acrylic,Glass,crystal,wood,leather,cloth,rubber,marble,ceramic,etc. Working area: 300*500 mm Max moving speed: 1500mm/s Laser energy control: 1-100¡§G set by hand or software Worktable(optional): Manual up and down table/fixed table/honeycomb table/Aluminum table Locating precision:
Model name: kl-570 Laser power :, 50 w(optional 60w/80w) Laser tube life span, 1800 working/hours. Applicable materials, acrylic, glass, crystal, wood, leather, cloth, rubber, marble, ceramic, etc. Working area:, 500*700 mm Max moving speed:, 1000mm/s Laser energy control:, 1-100¡¡¨¬g set by hand or software Worktable:, electric up and down table/honeycomb table/aluminum table(optional) Locating precision:,
3 ProductService Description Introducing REX SLTL Groups cuttingedge Laser Marking system marking milestones in precision and efficiency for over 30 years REX combines the power of Fiber and CO2 laser technologies with proprietary software for impeccable impressions on both metals and nonmetals Its a CECompliant Low Power Laser Marking Machine a gamechanger for industries seeking swift production without compromising quality Key Features of Optifly 1 Seamless Integration REXs compact design seamlessly integrates into any production line offering multiple beam options for versatile applications Trust Optifly for errorfree highspeed marking that synchronizes effortlessly with your production flow 2 Camera Vision Driven Marking Optifly boasts a builtin camera for precise 2D scanning enabling easy tracking and tracing This technology ensures accurate marking positions enhancing efficiency and reliability in production 3 Intuitive Software Optifly is equipped with highperformance software facilitating automatic production flow The userfriendly interface allows quick modifications and verifications supporting various marking options such as barcodes batch numbers serial numbers logos alphanumeric texts and QR codes 4 CO2 Fiber Laser Support Whether its metal or nonmetal Optifly adapts to your needs Working on both Fiber and CO2 laser technologies this highspeed spacesaving machine seamlessly integrates into any production line with comprehensive interfaces Elevate your production capabilities with OPTIFLY where innovation meets efficiency SpecificationAdditional Details 1 Model Optifly 2 Laser Source Sealed CO2 3 Laser Power 30 W 4 Marking area 60 x 60 mm
