We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Monoglycerides of castor oil are used as emulsifiers and surfactants in a wide range of products, including cosmetics, pharmaceuticals, food, and beverages. Monoglycerides of castor oil are often used as emulsifiers to help keep ingredients from separating. They are also used as surfactants to help reduce surface tension and improve the spreadability of a product. Monoglycerides of castor oil are considered to be safe for human consumption and have been approved for use as an additive in food and beverages by the U.S. Food and Drug Administration.
Classification:Chemical Auxiliary Agent, Chemical Auxiliary Agent CAS No.:8002-33-3 Other Names:Sulfonated Castor Oil MF:C18H32Na2O6S EINECS No.:232-306-7 Purity:40-80%, 40%, 50%, 60%, 70%, 80% Application: 1.In the fiber industry, it is used as fabric oil agent, fiber finishing agent, softener, lubricant, wetting agent, dyeing assistant, etc. 2. It is used as brightener, fatliquoring agent and softener in leather industry. 3. A plasticizer for casein finishing. 4. Used as a lubricant in the metal industry.
Castor Oil - F.S.G
Ricinoleic acid
WE HAVE THE BEST EXPORT QUALITY COMMERCIAL CASTOR OIL AMONG SUPPLIERS ALL OVER INDIA. IT IS BECAUSE WE HAVE EXPELLER PLANT IN OUR PRODUCTION PROCESS AND THUS FAR BETTER THAN SOLVENT PLANT WHICH OTHER SUPPLIERS USE. IF QUALITY REALLY MATTERS WITH YOU THEN PLEASE GIVE US A CHANCE TO CATER YOU.
WE HAVE THE BEST QUALITY BSS/FSG CASTOR OIL AMONG SUPPLIERS ALL OVER INDIA. IT IS BECAUSE WE HAVE EXPELLER PLANT IN OUR PRODUCTION PROCESS AND THUS FAR BETTER THAN SOLVENT PLANT WHICH OTHER SUPPLIERS USE. IF QUALITY REALLY MATTERS WITH YOU THEN PLEASE GIVE US A CHANCE TO CATER YOU.
WE present our superb quality castor oil cake (khal) to you.Castor Cake is an excellent fertilizer because of high content of Nitrogen, Phosphoric Acid and Potash and moisture retention and it is also the prominent organic fertilizer. it has 6-7% castor oil content. Nitrogen-4% Min Potassium-1 % Min Phosphorous-1 % Min Moisture-12 % Max
Refined Castor Oil, Ricinus Oil
Hydrogen gas is passed through Refined castor oil with Nickel as to get Hydrogenated Castor Oil. After filtration, the liquid HCO goes either to Flaking machine to get HCO Flakes or to Spray Drying Tower to get HCO Powder. Physical, Chemical Properties & Specifications: 1. Appearance - Flakes Form 2. Hydroxyl Value - 154-175 3. Iodine Value - 5.0 Max. 4. Saponification Value - 176-186 5. Acid Value - 3.0 Max. 6. Melting Point - 85-88°C 7. Specific Gravity 250C - 1.02 8. Color - White to Pale Yellowish 9. Appearance @ 20°C - Solid (Mobile liquid @ 300C) 10. Odor - Almost none 11. Nickel Content - 3 Max 12. Color Gardner - 2G/3G Max 13. Flash Point 0C - 242 C DIN ISO 2592 14. Solubility in Water @ 200C - 100G/L 15. pH @ 100G/L H2O - 6-7
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.