Seal level: IP67 (1 meter underwater immersed for 1 hour) Shock resistance, vibration, anti-misplacement Insertion cable Suspension anti-electromagnetic interference protection No installation tools In addition, compared with other reinforced shell smaller and lighter; Signal attenuation; to prevent unauthorized tap and disconnect; support most of the network services; easy to engineer management and maintenance; highly resistant, including heat, humidity, dust and water interference; excellent expansion and application upgrade potential; 1. Rated current: 1.5A 2. Rated voltage: 125V 3. Insulation resistance: 500 4. Contact resistance: 30M 5. withstand voltage: AC 1000V RMS 50 Hz or 60 Hz 1 minute machine material 1. Housing: ABS resin (U L94V - 0) PBT (UL94V - 0 compliant) Nylon 66 (UL94V - 0 compliant) Nylon 46 (UL94V - 0 compliant) 2. Contact line: 0.45 m diameter phosphor bronze gold plated, the thickness of 0.35, nickel-phosphorus bronze alloy Selective nickel plating 3. Shield: 0.20 - 0.25 mm thickness tin plated brass 4. Gold plated: 3U inch, 6U inch, 15U inch, 30U inch, 50U inch surroundings 1. Operating temperature: -40 C to 70 C 82
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. Preformed Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. China ADSS Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
Outer Diameter: 4.76mm to 15mm Coatings: copper, silver zinc, gold zinc, olive zinc, PVF, galfan. Packing Shape: cut to length, pancake coil, spiral roll, coils, staight pipe with fittings Application: Automobile brake line pipe Standard: ASTM A 254, YB/T4164 Certification: ISO9001 We have been supplying products to Canada, the United States, Russia, Spain, Turkey, Iran, Brazil and other countries for many years. We also make products according to your drawings or samples. If you are interested in our products or have any need, please feel free to contact us. We are looking forward to receiving your inquiries and sincerely hope to cooperate with you in the near future!
Outer Diameter: 4.76mm to 15mm Coatings: copper, silver zinc, gold zinc, olive zinc, PVF, galfan. Packing Shape: cut to length, pancake coil, spiral roll, coils, staight pipe with fittings Application: Automobile brake line pipe Standard: ASTM A 254, YB/T4164 Certification: ISO9001 We have been supplying products to Canada, the United States, Russia, Spain, Turkey, Iran, Brazil and other countries for many years. We also make products according to your drawings or samples. If you are interested in our products or have any need, please feel free to contact us. We are looking forward to receiving your inquiries and sincerely hope to cooperate with you in the near future!
Outer Diameter: 4.76mm to 15mm Coatings: copper, silver zinc, gold zinc, olive zinc, PVF, galfan. Packing Shape: cut to length, pancake coil, spiral roll, coils, staight pipe with fittings Application: Automobile brake line pipe Standard: ASTM A 254, YB/T4164 Certification: ISO9001 We have been supplying products to Canada, the United States, Russia, Spain, Turkey, Iran, Brazil and other countries for many years. We also make products according to your drawings or samples. If you are interested in our products or have any need, please feel free to contact us. We are looking forward to receiving your inquiries and sincerely hope to cooperate with you in the near future!
Perforated mesh This feature makes perforated mesh popular for making of rigid filter discs, cylinders, filter element support metal pipe and perforated test sieves. Material: Stainless steel 304/304L/316/316L/321/310, aluminum, brass or alloy. Hole style: Round/square or custom. Hole Pattern: The hole are arranged in straight line or stagger line Mesh Opening: 0.6mm--10mm Pitch: 1mm--30mm Perforated Plate thickness: 0.34mm--5mm Features: Anti-corrosive, anti-abrasive, long-lasting life span, easy application, economical, etc. Application: Perforated metal discs can be used as filters or test sieves. We also supply perforated metal cylinders or tubes to support the filter media. It can be processed into the forms of tube, cylinder, sheet and conical as filter mesh, filter cartridge, cylinder or filters for filtration in petroleum, chemical, oil cooler, food and pharmacy.
Item Code 14.01.030 Specification Recommended in hyper flexion injuries collateral ligament injuries of Distal Inter Phalangical joint. Maintains inetrphalangical joints in correct position. Foam padding ensures comfortable fit.Finger Ext Splint supports, protects and immobilizes the metacarpals in case of fracture or injury. Convenient Application by just inserting the finger. Hook and loop bands ensure a snug fit and eliminates the need for taping. Can be customized to maintain the proximal phalange joint and MCP in flexion. Light weight Pleasing aesthetics Comfortable cushioning Hypo allergenic Inbuilt hook loop closures Coated aluminum body Malleable can be bent and customized Strong, provides rigid immobilization Aesthetically pleasing Light weight Ergonomic design U design ensures full protection in injuries and burns. Can be customized to provide stable immobilization Ensures easy wearing during injury Well ventilated and comfortable Ethafoam lining High cushioning Enhanced comfort Easy to clean and maintain Inbuilt Hook loop fasteners Close fitting and excellent grip Easy Application and removal. Sizes Size Inches CM Small Below 2 Below 5 Medium 2-3 5-7.5 Large 3-4 7.5-10
Recommended in hyper flexion injuries collateral ligament injuries of Distal Inter Phalangical joint. Maintains inetrphalangical joints in correct position. Foam padding ensures comfortable fit.Finger Ext Splint supports, protects and immobilizes the metacarpals in case of fracture or injury. Convenient Application by just inserting the finger. Hook and loop bands ensure a snug fit and eliminates the need for taping. Can be customized to maintain the proximal phalange joint and MCP in flexion. - Light weight - Pleasing aesthetics - Comfortable cushioning - Hypo allergenic - Inbuilt hook loop closures - Coated aluminum body - Malleable can be bent and customized - Strong, provides rigid immobilization - Aesthetically pleasing - Light weight - Ergonomic design - U design ensures full protection in injuries and burns. - Can be customized to provide stable immobilization - Ensures easy wearing during injury - Well ventilated and comfortable - Ethafoam lining - High cushioning - Enhanced comfort - Easy to clean and maintain - Inbuilt Hook loop fasteners - Close fitting and excellent grip - Easy Application and removal. Sizes Inches CM Small Below 2 Below 5 Medium 2-3 5-7.5 Large 3-4 7.5-10
1.Product Name: H4 adaptor brass 2.Product Type: Philips H4 adaptor brass 3.Material: brass with Nickel plated 4.Usage: Philips H4 lamp base(fit for high power lamp) 5.Product Parameter: Height: 2-0.2mm Outside Diameter: Φ25.05-0.05mm Inside Diameter: Φ24.05-0.05mm 6.Product Feature: Philips type H4 adaptor with Nickel plated; Perfect fitness with capsule, excellent performance in Deviation Test; Automatic metal stamping process with precision progressive die. 7.Quality: Using VDA6.3 Standard by Philips. 8.Certification: IATF 16949 9.Packaging Details: 10000 pcs per carton. FAQ: 1.Do you have any other version of different material? Yes, we have stainless steel type, but it is mainly used for low power lamp. 2.Whatâ??s the thickness of plating? 0.03-0.05 mm. 3.How long about the Salt Spray Test? 96 hours. 4.Do you develop punching mould yourself? All of the moulds in our plant are designed by our technical team. 5.Do you finish the plating at your own plant? We have plating partner with more than 20 years cooperation relationship. Company and Factory: Specializes in precision progressive die stamping, compression molding for more than 30 years. Our factory owns more than 20,000ã?¡plant area and hundreds of precision punching machines, automation equipment and processing machinery. The cost is controlled accurately and the quality is guaranteed. url:http://www.invi-tech.com
Application and Features: Suitable for butt welding of plastic pipes and fittings made of PE, PP and PVDF in a ditch in worksite or workshop. Consists of basic frame, hydraulic unit, planing tool, separate heating plate, support for planing tool & heating plate, and optional parts. Removable PTFE coated heating plate with high accurate temperature control system. Electric planning tool with safety limit switch enables to start it only when it is locked in operation position. Made of lightweight and high strength material. Low starting pressure and high reliable seal structure. Changeable welding position brings more convenience while welding various fittings. Separate two-channel timer records times in soaking and cooling phases. High-accurate and shockproof pressure meter indicates clearer readings. Labor saving and high efficient crane is available to lift planing tool and heating plate . Optional parts: Stub end device for short flange stub Data logger. The main parameters: Model SD-H160 Pipe size(mm) 63,75,90,110,125,140,160 Heating plate Max. Temp. 270 Temp. deviation in surface(170~250)
GT550E Universal Safety OutriggersPressure Switch CABLE, SHIPBOARD-MULTICORE 56625-1.5-03 Retulator F/Purge System 7817991 PIN W/INLINE FLANGE-WHT 117513-PF-WHT Wear disc seal AH160201-0115 YZ101.55.11 Rope guard Drill pipe tong accessories ZQ203-125 notch gear 01.01-37M Drill pipe power tong accessories ZQ203-100 pin 010101-04M M16-1001-01B BEARING BALL FOR CASING TONG MODEL: 16-25, MAKE: WEATHERFORD, P/N: 107454.001 NK400E Universal* pourMirror assembly PLUG, PIPE, C'SUNK HEX 53000-4-C Fluid loss reducer for drilling fluidJX-JL modified starch PDC bit 215.9mm BRS1655 Borui Brake device accessories ZJ-70 Piston pump A10VSO10DR/52R Brake device accessories ZJ-30C Extension spring JJ3-6-5/P9000052AA FZ35-70 oil pipe O shapeSealing ring �?26.5*2.65 JK00213-15 TORQUE FORCE ROD , JC030804 Drill pipe clamp accessories ZQ203-100 Fork 02-12M NATIONAL Mud pump SEAT 1561572 Loss-while-drilling agent SDL YZ101.55.50.04 Plate CHECK VALVE 94536-275N Drill pipe tongs accessories ZQ203-100 adjusting screw M24 0105-14M Drill pipe power tong accessories ZQ203 pipe sleeve 125 19.750-14 Gland Cable Brass Hazadous Area 501/453/Univ/C/M3 Hawke Electric control box FKQ640-6Driller fully sealed safety cover 7PK.02BJ-51B-00 FS-0375NC-0100 Power selection box accessories JR5321TSN gearbox oil pressure gauge C050020852A 85039-7 PLATE,PARTITION 50016-20-C5D SCREW: Bolt, Stand-Off M614004316 35�?35 BOP AccessoriesFZ35*35RS variable diameter ram assembly 41/2"-7" N10337 BDFS Low noise explosion-proof fan CABLE PIPEHANDLER RETENSION P614000139 91224 BUSHING,SLEEVE,1.12X1.38X1.75LG NK400 Fuel*Airfilter element E19-1008-030 YZ101.55.19 Plate 6 20 SLEEVE, MAIN SHAFT 110040-1 Head Assy:Grabs Die Nc-50 2028627 Detroit S60 DieselAccessories fuel system*diesel filter element 23518482 VOLVOFM12 startMachine * engine bracket fixing screw 161100115 REDUCER, O-RING BOSS 56556-16-12S NB800G.24.09A Backing ring R44 S01-1390-01N 115423 HYDRAULIC TUBE: MANIFOLD/LOAD STEM TDS Cable: Armored 3 Core With Shield 56625-1.5-03 Detroit Diesel Engine Parts Fuel System*Injector 16V149 5235820 ELBOW 1/2'' NPT 56606-8 Wear plate 2 1.03.14.363 35�?35 BOP Accessories2FZ35-35 rubber core screw JK212-40S-1-5 NB800G.05.09 Stud bolt M39x3-6gx262 Remote Console Accessory FKQ6406 Lubricator QAL-4000-04 GT550E Universal* Telescopingcylinder hose Hydraulic tank accessories F-1300 valve box LATCH SPRING, FOR ELEVATOR, MODEL: DDZ-250 P/N: 130302017 Trunk accessories ZJ45Positive carriage shaft 024.21.31.08 Hydraulic tank accessories F-1300 Piston rod with cap TM-2145/NUT Pin: Bay 91060-500 Trunk accessories ZJ-40L Parallel transmission box 1# transmission shaft assembly BA70002-05.00B Drill pipe power pliers accessories ZQ203 air valve intake hose 100 05-05M 91251-4 SHIM, BEARING RETAINER
Iron Decorative Panels Supplier Cast iron or aluminum railing panels can be mixed with fencing or used alone to create a stair or balcony railing that is both safe and beautiful. We offer both cast iron and aluminum railing panels. Wrought iron decorative panels are available in a variety of designs and patterns to suit different fencing styles and preferences. Decorative iron panels can be mounted in a variety of ways, including welded, bolted, or secured with brackets, and can be adjusted to fit spaces of different sizes and shapes. The following wrought iron parts Railings Rails Reels Bars Newels Rings Shoes & Bushings Hammered Pipes Panel Rosettes Spear Points and Spikes
Feature Attractive Design Ergonomically Designed To Minimize Hand Fatigue During A Prolonged Period Of Usage Diverse Handles (Rubber Handle, Aluminium Die-casting Handle, Plastic And Rubber Handle, Pipe Handle) Diverse Packing Methods (Plastic Sheath, Vinyl Case) Replacement Saw Blade Available (When The Saw Blade Worn Out, Only The Saw Blade Needs To Be Replaced On The Existing Handle) Can Be Fitted On With Our Pole Model Specification Aluminum + Abs + Pvc(With Hook, With Knife) & Vinyl Case Blade Length(Mm) : 380 Mm Blade Thickness : 1.20 T Teeth Pitch : 4.25 Mm Packing : In/ct 12 Pcs/48 Pcs
Feature Attractive Design Ergonomically Designed To Minimize Hand Fatigue During A Prolonged Period Of Usage Diverse Handles (Rubber Handle, Aluminium Die-casting Handle, Plastic And Rubber Handle, Pipe Handle) Diverse Packing Methods (Plastic Sheath, Vinyl Case) Replacement Saw Blade Available (When The Saw Blade Worn Out, Only The Saw Blade Needs To Be Replaced On The Existing Handle) Can Be Fitted On With Our Pole Model Specification: ALUMINUM DIECASTING HANDLE & VINYL CASE BLADE LENGTH(mm) : 350 mm, 380 mm(WITH HOOK) BLADE THICKNESS : 1.20 t TEETH PITCH : 4.25 mm PACKING : IN/CT 12 PCS/48 PCS
Product Description PVDF resin, a polyvinylidene fluoride polymer prepared by an emulsion process. Its high purity, with excellent chemical corrosion resistance, oxidation resistance, radiation resistance, and good mechanical properties, is suitable for architecture-grade film application and to be molded into pipe fittings, pumps and valves, and other parts of various specifications. Density g/cm3 1.77-1.79 Water content Wt% 0.10 Durometer hardness Shore D 74 80 MFR230 5kg g/10min 626 Tensile breaking strength 25 Elongation at break % 20 Tensile Strength, Yield 25 Elongation at Yield % 10 Melting Point 165 170 Thermal decomposition temperature 370
37 DEG FLARE FLANGE is a new range of flared flange products offering a low-cost alternative to tube fittings which previously required welding. No welding process required, it saves subsequent acid pickling, flaw detection and other procedures, and greatly shortens pipe cleaning time, makes construction easier and reduces labor costs; It is applicable to 16 140mm hydraulic pipelines, with a maximum working pressure up to 420bar; Products meet SAE J518/ISO6162, ISO6164 standards; No leakage has ever been found after being repeatedly used by the customers in many industries such as maritime engineering, maritime works, metallurgy, etc.
Introduction of ZM 18 Mini Hydraulic Excavator 1.Original imported Diesel engine, our ZM 18 mini hydraulic excavator meet the EURO III emission standard 2.Original hydraulic component; Hydraulic system based on load sensing technology, excellent running performance, gentle action only can make high accuracy 3.Turning radius quite short, the chasis luffing can be adjusted and the boom is deflectable,fit for safe working in narrow space. 4. Attached piping system are standard configuration, subsidiary device can be arranged easily.
Needle Valves Product Details� Nominal Size: 1/8~3/4��DN3~DN20� Working pressures up to 6000 psig (413 bar) Temperatures up to 500°F (260°C) with standard PTFE packing; up to 600°F (315°C) with optional flexible graphite packing Body Material: 316SS, Alloy 400, Titanium alloy available. Valve Type: Straight and angle-pattern valves End Connection: Tube fitting, Male and female NPT and ISO pipe. Instrument Valves , Instrument Manifold Systems , Needle Valves For Sale Supplier.
This mould is used to produce outer - threaded plastic pipe. The product adopts the molding method of one module with two cavities, so it has high production efficiency. At the same time, the precision of the product is high, so the thread has a high degree of fit, which can meet the industrial demand. -No.of cavities: 2 -Product material: P20 -Hardening: HRC 35 -Mould life: 80 million -Ejection system: Hydraulic cylinder -Delivery time:70 days -Cycle time: 60s -Working mode: Automatic mode
