Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available
Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available.
Applications: Wear-resistant material for all mechanical equipment exposed to heavy abrasion,material delivery systems, pulverizing systems, ash or dust removing systems in thermal power generation, iron and steel works, smelting, machinery, coal, mining, chemical, cement and harbors. Features 1.Alumina wear-resistant sheet has high hardness It Rockwell hardness is HRA80-90, second to only diamond and far better than wear-resistant steel and stainless steel. 2.Alumina wear-resistant sheet has sound wear performance Its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. From our customer follow-up over the past decade, under the same load, it can extend the equipment service life by at least 10 times. 3.Alumina wear-resistant sheet has light weight Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load. Size: 12*3mm,12*6mm,12*9mm,12*13mm, or cusomer required size Packing: in Cartons
Normally square or hexagon Applications: Wear-resistant material for all mechanical equipment exposed to heavy abrasion like coal/material delivery systems, pulverizing systems, ash/dust removing systems in thermal power generation, iron and steel works, smelting, machinery, coal, mining, chemical, cement and harbors. Features 1.Alumina wear-resistant sheet has high hardness It Rockwell hardness is HRA80-90, second to only diamond and far better than wear-resistant steel and stainless steel. 2.Alumina wear-resistant sheet has sound wear performance Its wear resistance is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. From our customer follow-up over the past decade, under the same load, it can extend the equipment service life by at least 10 times. 3.Alumina wear-resistant sheet is lightweight Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load. 4.Alumina wear-resistant sheet is securely bonded and highly heat resistant Our alumina wear-resistant ceramic sheet is attached to the equipment inner wall by heat resistant super glue and can work constantly under 350 without ageing. The organic adhesive for attaching the product withstands 750 temperature. The heat resistance and bonding performance of the adhesive is far ahead of other products in China. Size: 10*10*3-10, 17.5*17.5*3-15, 20*20*4-20, 24*24*4-20 Packing: in Cartons Product Advantages: Accurate product dimensions, neat surface, high purity, high wear resistance
Product Description The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system! We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production. This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off. After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience. Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times. It is the ideal product instead of steel or rubber lined pipe and elbow. Advantages: 1. Good abrasion resistance The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks. 2. Little loss during running 3. Low project cost Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project. 4. Good thermal stability -50 ~600 degree C is the ideal temperature. 5. Easy and fast to fix on site Welding, flange, flexible joint are available.
All type of electrical , electronics ceramic component 25 to 30 kgs
Product Description 1. High efficiency of heat-conduction 2. Heat shock stability 3. Wear resistant 4. High temper-endure (up to 1200deg-1600deg) 5. Self-lubrication 6. High performance of mechanical strength 7. Chemical corrosion-resistant
Mainly product: Alumina 99.7% (Alsint C997, KER 710) and Silicon Carbide (Recrystallized sic, Nitride bonded sic and Reaction bonded sic) protection sheath, insulator and parts.
The absorber catalysts have been broadly used for volatile organic compounds (voc) emission control at low temperature condition. Newly zeolite absorber catalyst is able to operate at even room temperature. The catalyst for carbon monoxide and volatile organic compounds (voc) emission control are major products at cas-kr. With our key patented technologies, these products have been widely used for emission control in chemical plants, food process plants and organic fumes reduction. Current this catalyst has both ceramic or metal monoliths option. 100*100*100¡ê¬50*50*50 and any size you need
Ceramic plates -7'' round with wooden stand with Pictures of all religion gods with 22k gold trims One pack of 12 gift boxes
Low heat storagelow thermal conductivity Excellent chemical stability Excellent thermal stability and thermal shock resistance Excellent sound insulation High flexibility Excellent machine-processed capability. Carton
Plastic bag for inner packaging, woven bag for external packaging
Our products ceramic proppant can be divided into: A. By compressive strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi); B. By bulk density: low density, medium density, high density; C. By specifications :16-20 mesh ,16-30 mesh ,20-40 mesh ,30-50 mesh ,30-60 mesh ,40-60 mesh ,40-70 mesh ,70-140 mesh, etc. We can also develop and produce different proppant according to your requirements. 1.Low acid solubility 2.High permeability 3.Superior quality and competitive price 4.High crushing strength 5.Superior thermal stability 6.High conductivity 7.Passed authentications of ISO9001:2008 ; API RP56. Plastic bag for inner packaging, woven bag for external packaging.
Art plate from phulang ceramics 2. Lumpy and rugged glazes from nature material such as lime, mud, ash ... 3. Fired in high temperature reachs approximately 1200 degree 4. Assorted shapes and colors available 5. Popular sizes: A) Sw 20 cm ( dimension 20cm ) B) Sw 30 cm ( dimension 30cm ) 6. Customers' design welcomed 7. Packing: wooden pallet and carton box
Dtcor titles from phulang ceramics 2. Lumpy and rugged glazes from nature material such as lime, mud, ash ... 3. Fired in high temperature reachs approximately 1200 degree 4. Assorted shapes and colors available 5. Popular sizes: A) l 10 x w 10 cm B) l 15 x w 15 cm 6. Customers' design welcomed 7. Packing: wooden pallet and carton box
Ceramic chef knife white color made of advanced zirconia, 4", 5", 6", blade with pp handle , Blister packing
The ceramic custom murals are consists of a number of color-glazed ceramic tiles, the tile size and overall murals size is set for designers or buyers' options. The murals can be framed and hung on the wall or placed on the ground for floor decoration (need special process on the tiles). Our color-glazed murals are all hand-painted, it is a perfect materials and products for interior designers in their projects, also a elegant art at home and public areas.
Mainly used in regenerative thermal oxidizer applications Organic compounds can be removed from waste gases by treatment through a regenerative thermal oxidizer (rto). An rto contains a ceramic heat exchanger bed that is utilized for the preheating and cooling of the waste gases before the gases enter and exit the combustion chamber, respectively. Honeycomb monoliths provide a more efficient alternative to other ceramic media, such as saddles or balls, that have conventionally been used in rtos. The raw materials of this ceramic monoliths(also called multi-channel bricks) are stoneware or cordierite or mullite and ceramics. Its shapes can be of rectangular, cylinder and ellipse. For the rectangular multi-channel bricks, the size is 150*150*50~300mm. The channnels are 20*20, 25*25, 35*35, 40*40, 59*59, 100cpsi, 200cpsi, 300cpsi, 400cpsi; the size of cylinder or ellipse multi-channel bricks are 50~150, 50~200mm, channels are:100cpsi, 200cpsi, 300cpsi, 400cpsi.
Specification: 150*150*300 millimeter 105pcs/box in wooden box. Our honeycomb ceramic are widely used in following range:packing of checker /combustion chamber, metallurgy, packing for chemical industry, architecture, the regenerative type of chemical industry furnace, the exhaust gas of the thermal power plant gets rid of nox cleaning system, rto/rco (regenerative thermal/catalyst oxidizer system), htac(high temperature air combustion), the air net chemical industry waste gas of high temperature is dealt with, the rubbish burns, the cleaning system of pernicious gases, the poisonous gas of chemical industry and auto/motor industry and mining industry epurate and deals with the casting course to use the filter , catalyst carrier.We also produce ceramic structure or random packing.
Mainly product:alumina 99.7% (alsint c997, ker 710) and silicon carbide (recrystallized sic, nitride bonded sic and reaction bonded sic) protection sheath, insulator and parts.