Peristaltic dosing pump ab12 1 applicable power: dc6v 2 working environment: temperature 0-40 ¡ã c, relative humidity
Arcing is eliminated. Connect the red battery clamp to the positive battery terminal. Connect the black Clamp to the negative or ground to a rigid metallic surface on the engine. The connection should be 12 to 19 inches from the battery. 4.Hose: Since the pump has a lower discharge pressure it is ., recommended that anoncolapsiable hose be used for maximum pumping capacity. 5.Hoisting & lowering: Use the attached nylon line. Do not use the power cord ., for handling the unit. 6.Operation of unit: Lower the unit into the liquid to be pumped(note: this unit is not to used to pump Flamable liquids).Then turn on the switch. Pump can be run for a few minutes(less than 5) without liquid. Do not run completely dry for any extended period(less than 5 min.).This will prevent. 7.Running time peroids: The unit draws 20-25 amperes and can be operated for approximately 1 hr. On a fully charged 60 amp-hour battery and still be able to start the vehicle under normal conditions. Caution should be used when running times exceeds 25 !v 30 minutes without the engine running to recharge the battery. Also be mindful of cold temperatures which lowers battery
I: Feature: 1). Life: Expected life span is at least 20000 hours. 2) Low noise: 35dB, far from 10cm distance. 3) Duty work: The pump can sustain heavy duty work for a day, continuous operation. 4) Working conditions: Applying to indoor and outdoor under temperature 40degC. 5) Working temperature: Within 100 cent degree 6) It is waterproof but not submersible. II: Application: 1) Coffee maker 2) Tea pot 3) Fountain 4) Water circulation system III: Parameter Specification: Model: 25-01 Working voltage(VDC):4.5~12 Working current(mA): 300~350 Max-Static lift(meter): 0.7~2 Max-Static flow rate(L/Min):0.8~1.5 Temp: ¡Ü100degC Remarks: not submersible The tolerance of technical parameters above is ¡À10% and the technical parameters above is only for your reference, for more details, please feel free to contact us. Model: 25#-01 Dimension (mm): 32(Length)*26(Width)*36(Height) Inlet OD (mm):9 Outlet OD (mm):7 Remarks: both for white and black items.
Diffuser is designed for matching with the ready made local 4/8" faucet, easy to install. Tough and durable construction. Higher oxygen dissolution rate and corrosion resistance. Prevent backflow and clogging. Material: 1. Diffuser cover:neoprene rubber, resisting against acid and alkali. 2. Diffuser base:abs Specifications: 1. Bore:4/8'' - thread, 3/8'' - air inlet. 2. Diameter:80mm 3. Height:40mm 4. Ventilation volume:0.08 ~ 0.10 m¦/min -
Features: 1. Lower noise:pressure pluses are the major noise source in blowers. The trundean roots blower design can efficiently reduce noise by approximately 5 db. 2. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 3. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
Features:: 1. Quietness:because of its submergibility under water, so there will be not much noise from the machine when in use. 2. No need of a silencer:because of its under water, the created noise will be very low, so there will be no need to do silencer. Under-water can mean space-saving. 3. Strong structure, be relieved:the direct connect between the motor and the blower can avoid the inconvenience of traditionally-done belt adjustment. 4. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 5. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity:11.5KW~18.0KW COP: 3.5-3.9 Certificates:CE,CCC, ISO9001. Carton box or plywood
1. All in one design,install and maintain conveniently. 2. water and electricity system is completely separated, assure using safely 3.the water temperature is set freely within 30-55 4.with magnesium nod inside. 5.Intelligent control 6.Compact design with 200L/250L/300L available for option 7. Stainless steel tank inside, plus 50mm insulation 8. Refrigerant R407c and R410a are available for option 9.Automatic defrosting function included. 10.Electrical heating element inside as back up for emergent request 11 Stainless steel or other colors cabinet for option 12.50HZ and 60HZ are both available 13. The tank is available to have pipe coil inside for the external heating source, such as heat pump, boiler or solar system. Heating Capacity 2.6KW COP 3.4 Certificates CE,CCC, ISO9001. Carton box or plywood
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity 25.0KW~38.0KW. COP 3.7-3.9. Certificates CE,CCC, ISO9001. Carton box or plywood.
Tiller Model WM500 Body Size (mm) 1380 í- 650 í- 970 N.Wú¿ kg ú¬ 60/74 Tilling Scope(mm) 500-1000 Tilling Depth(mm) 150-250 Gear Shifting 0,1,2/-1,0,1/0,1,2,-1 Transmission Type Belt Transmission Oil Capacity (L) 0.95 Engine Engine Model WM168FB Boreí-Strokeú¿mm ú¬ 68 í- 54 Displacementú¿ml ú¬ 196 Compression Ratio 8.5 ú¦1 Max.power output HP/rpm 6.5 ú¿ 4.8ú¬ /3600 Max.Torque (M.m/rpm) 13.2/2500 Fuel Oil capacityú¿ L ú¬ 3.6 Engine Oil capacityú¿ L ú¬ 0.6 Min.fuel consumption g/KW. h 395 Air cleaner model semi-dry,oilbath,foam filter element Ignition system Transistor magneto Engine model OHV25 ípSingle cylinder,4-stroke Packing Dimension (mm) 820 í- 375 í- 780 20 FT(set) 123 Note with wheels and mud fender Certificate GS,CE Dimension:820*375*780mm
Cooling Tower Pump Cooling tower water circulation pumps are critical to the chiller system they serve. Your chilled water system may even have more than one type of chilled water pump, with one main pump circulating water through the chiller and another main pump circulating water through the building. All chilled water or condensate pumps should have good seals, bearings, rotating parts and drive motors. Both circuits have controls, bypasses and valves that are often overlooked during inspection and maintenance. Pump filters should also be clean. Characteristics Of Cooling Tower Pump a.Stable operation: the absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration. b.No leakage: cemented carbide seals of different materials ensure no leakage of different media. c.Low noise: the water pump supported by low noise bearing runs smoothly, and there is basically no noise except the weak sound of motor. d.Low failure rate: the structure is simple and reasonable, the key parts are equipped with international first-class quality, and the trouble free working time of the whole machine is greatly improved. e.Easy maintenance: easy to replace seals and bearings. f. Less land occupation: the outlet can be left, right and up, which is convenient for pipeline layout and installation and saves space.
Fuel Pressure Regulator For " Audi & Volkswagen " Part Number : 7P0919679A
Elvie Double Wearable Breast Pump BRAND NEW 1. How To Order ? Step 1, please tell us what model and quantity you need; Step 2, then we will make a Order Invoice for you to confirm the order details; Step 3, when we confirmed everything, You proceed with the payment arrangement; Step 4, finally we deliver the goods within the stipulated time. Q: What's your payment terms ? A: We can accept Bank Transfer, BITCOIN , Western Union, MoneyGram Q: What's your shipping method and delivery time ? A: After the shipout, it take 3-5 days depending on location, Via DHL/EMS/TNT/UPS/FEDEX/OTHERS, it is safe and fast All orders will ship out 24 hours or less after placing order Every purchase is backed by Warranty, guarantee with easy returns Policy 100% Guaranteed Fast shipping 100% Guaranteed After-Sales support 100% Guaranteed Genuine/Authentic Product 100% Guaranteed Factory warranty
Product Parameter: Character ModelZL38-11 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-12W/12V: 3-18W/24V: 5-25W Static Water Head1-7 M Static Flow Rate4-10 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base, workable in water (Submerged) Max NoiseUnder normal working status, 1M distance over test instrument
MACHINE Mode l: Mr. SOFTY FLOOR/P (TWIN FLAVOR SOFTY ICE CREAM) (two flavor + one mix flavor) FLOOR MODEL WITH PUMP (Its Give over run up to 80%) (increases the volume Up to 80%) 1. Capacity 425 cones per hour (31 kg-53 Ltr./Hr.) 2. Tank (Hopper) Capacity : 8 + 8 Ltr. 3. Available Model-1 phase (230 Volt) 50Hz and 3 phase (420 Volt) 50Hz 4. Dimension (m.m) width 510 x depth 725 x height 1400
Product Parameter Character Model ZL25-02G2 Working Voltage Range DC: 4.5V-12V Rating Power 4.5V: 0.5-2W / 6V: 1-3W / 12V: 2-3W Static Water Head 0.4-2 M Static Flow Rate 0.6-1.8 L/min Lifespan Continuous operation under normal working surrounding >20000Hr Working Environment Liquid: From weak acid to weak base?workable both on land and in water (Submersible) Max Noise Under normal working condition, 1M distance over the test instrument
Technical Parameter Character ModelZL32-13 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-6W / 12V: 3-6W / 24V: 4-7W Static Water Head0.6-3 M Static Flow Rate0.8-2.7 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base?workable both on land and in water (Submersible) Max NoiseUnder normal working status, 1M distance over test instrument
Product Parameter Character ModelZL38-33 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-12W/12V: 3-18W/24V: 5-25W Static Water Head1-5 M Static Flow Rate5-13 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base, workable on land (Non submersible) Max NoiseUnder normal working status, 1M distance over test instrument
Technical Parameter Character ModelZL32-02 Working Voltage RangeDC: 6V-24V Rating Power6V: 2-6W / 12V: 3-6W / 24V: 4-7W Static Water Head1.0-2.5 M Static Flow Rate2.0-3.5 L/min LifespanContinuous operation under normal surrounding >20000Hr Working EnvironmentLiquid: From weak acid to weak base?work in water (Submerged) Max NoiseUnder normal working status, 1M distance over test instrument
A&s pump co., ltd will be glad to cooperate with you. Here at a&s pump co., ltd, we offer the following pumps: iwaki magnetic drive pumps, richer magnetic drive pumps, sunsun air pumps, ilmvac pumps, flojet pumps, verderair pumps, armek pumps, kuobao pumps, march pumps, mikawa pumps, pan world pumps, sanso pumps, wilo pumps, almatec pumps, shurflo pumps, hypro pumps, jabsco pumps, ingersoll rand pumps, dayton pumps, binks pumps. Original seal package