Cooling Tower Pump
Cooling tower water circulation pumps are critical to the chiller system they serve. Your chilled water system may even have more than one type of chilled water pump, with one main pump circulating water through the chiller and another main pump circulating water through the building.
All chilled water or condensate pumps should have good seals, bearings, rotating parts and drive motors. Both circuits have controls, bypasses and valves that are often overlooked during inspection and maintenance. Pump filters should also be clean.
Characteristics Of Cooling Tower Pump
a.Stable operation: the absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration.
b.No leakage: cemented carbide seals of different materials ensure no leakage of different media.
c.Low noise: the water pump supported by low noise bearing runs smoothly, and there is basically no noise except the weak sound of motor.
d.Low failure rate: the structure is simple and reasonable, the key parts are equipped with international first-class quality, and the trouble free working time of the whole machine is greatly improved.
e.Easy maintenance: easy to replace seals and bearings.
f. Less land occupation: the outlet can be left, right and up, which is convenient for pipeline layout and installation and saves space.
Supplier: Steam boilers, hot water boilers, steam generators, kitchen equipments, cooling towers, pumping system, sand fitlers, softeners
Buyer: Valves, pipes & fittings
Supplier: The cooling systems, water tower, pumps, valves, flanges, fittings snowmaking systems.
Supplier: Chiller, cooling tower, motor, pumps, ductable, vrv & vrf, ahu, fcu, split, window, ducting, insulation, supply fan, exhaust fan, damper, fire fighting, softener plant, lift, escelator, dgset etc.
Services:
Supplier: Mechanical seals ,orings , pumps, valves , cooling tower, gasket
Typicl ppliction: cr engine cooling circultion; cr engine pre-heting; heting system; Electric vehicles wter circultion system; norml hot wter circultion;liquid trnsfer; Mx Flow rte:23L/minute; Mx wter hed:3M, Voltge:12/24v, Current:1.25;0.75;Power:13.5W,18W
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity 25.0KW~38.0KW. COP 3.7-3.9. Certificates CE,CCC, ISO9001. Carton box or plywood.
Pos. Number 135.2 Rear Liner 1.4517 used for Andritz S 125-400 DD Centrifugal Pumps. The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700. manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc
Supplier: Auto water pump, engine part, cooling system
Supplier: DC fan, AC fan, cross flow fan, computer heat sink, AC brush less motor, DC brush less motor, pump, USB cooling fan, bladeless fan, and the extended products
