Series jzs engine oil regeneration system is mainly for regenerating the waste engine oil, this equipment can effective separate water, gas, particles, deeply oxides, free carbon, colloid, asphalt and wax from oil, making black engine oil become transparent golden color. This equipment has the functions of dewatering, degassing, discolor. Improving the engine oil's properties, restoring the oil's performance and lowering wear to ensure the engine can work normally and safely, prolonging the engine and engine oil lifetime.
Application: This machine is designed for treating wide range of unqualified insulating oil, including aging transformer oil, mutual inductor oil, switch oil ect. Features: 1.Bi-infrared liquid duplex 3d stereo-evaporation technology, dewatering and degassing effectively 2.Distinctive removing the impurity technology of filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power 3.Bi-infrared liquid level automatic controller system 4.Trinity inter locked preventive device 5.Either for vacuum oiling machine or vacuum drying machine 6.Automatically testing oil dielectric strength and printing out the result Advantages: This machine is a new-type of high-effective vacuum oil purifier with the duplex 3d stereo-evaporation technology and g technology. Adopting the technology which removes the impurities by using double fh trapezoidal network and high polymer absorbing without any mechanical power. It has 5-8 times effective than common vacuum oil purifiers. Low consumption of energy and less wearing materials are needed. Wooden
Application: This machine is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, car/motor oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines. Product description: LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource. Features: 1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil. 2. Completely removing water and harmful gas from the waste oil. 3. Recovering the color of the treated oil as fresh oil. 4. Simple operation, safe and reliable. 5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements. 6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract. 7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc. wooden
Model yz/xz32-2 screw oil press is the biggest national continuous pre-press and one-tme pressing equipment and suitable for the oil plant to process the seeds containing more oil such as peanut kernels, cottonseed kernels, safflower seed and sunflower kernels. Such equipment has the following advantage: high processing ability; low power consumption; low operation expense, defatted cake being loose but not crushed, is helpful to sovent penetration; low esidual oil rate. The press is the ideal oil press equipment both for large size and middle size oil plant. A.Processing capacity:260-300t/d b.Esidual oil rate of deffatted cake:16-20% c.Power :110kw D.Dimension:4100*2270*3850mm e.N.W :11500kg
Api 3/4¡± class sm slim hole sucker rod coupling 1) material: aisi 5140 2) standard: api spec 11b 3) main specification: Od:1-1/2" (38.1mm) Id: 1-1/16"(26.99mm) Length: 4" (101.6mm) Weight: 0.47kg 4)other size: 3/4¡±; 7/8¡±;1¡±; 1-1/8¡± 5)smoothness: 3.1*10-3 6)coat thickness(in): 0.01in ~ 0.02in 7)basic hardness: hrc 16-23 8)surface hardness: hrc 55-62 9)bonding strength(mpa): 484 10)hole rate: 180 days 15) package: wooden case, 1000pcs each case. 16) usage: oil exploration equipment, accessories, oil sucker rod coupling We are the manufacturer of sucker rod couplings and can supply the high quality sucker rod couplings in low price with the hope to establish a long-term relationship with you. If any of the sucker rod couplings interests you, please contact me for more information about the sucker rod couplings. Wooden cases
Application VFD-R series is adapt to regenerate and activate the deteriorated transformer oil. It is capable of removing the moisture, gas and mechanical impurities as well as eliminating organic acid, sludges, pitches and dissociated carbon in the deteriorated transformer oil which are difficult to be removed by conventional oil purifier plants. After the treatment, the regenerated oil can met the required standard and life span of new insulation oil. Description 1. VFD-R regeneration units adopt both physical and chemical methods. They can not only regenerate the aging transformer oil, switch oil but remove the acid, suspending materials and contaminates. 2. VFD-R regeneration units adopt special adsorbent. They can be normally run without switching off the power and changing the oil of transformer. 3. After the treatment, the transformer oil will maintain basic ingredients and anti-oxidation capacity to meet the standard of new transformer oil. Meanwhile, the CFD-R regeneration units can keep the power equipments insulating and safe by consuming only 90% maintenance cost. Technical specification After the treatment, performance of transformer oil can achieve the below specification: Breakdown voltage í¦ 75KV Flash point(close) í¦ 140íµ Soluble acid PH value =5~7 Dielectric loss tangent tg(90íµ)% í_ 0.002 Acid value í_ 0.01mgK0H/g Power: 380V/50Hz
Main Technical Parameters: Index name Unit ZY-10 ZY-20 ZY-30 ZY-50 ZY-100 ZY-150 ZY-200 ZY-300 Flow rate L/H 600 1200 1800 3000 6000 9000 12000 18000 Working vacuum MPa -0.06 - -0.095 Working pressure MPa < 0.4 Temperature range C 20 -80 Dielectric strength KV > 65 Water Content ppm < 5 Gas content % < 0.1 Particles size mm < 3 Power supplier 380v 50Hz,3Ph (As per user's option) Working noise dB(A) í_ 65-85 Heating power Kw 15 15 15 30 48 60 72 90 Total power Kw 16.5 16.5 16.5 33.5 53 65 76 98.
Relative Models VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Automation Purifier VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Regeneration Purifier VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Purifier with Tester Application VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil. Description VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it add ROOTS vacuum system, second stage of separating system to improve the effect of purification. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. Features 1. Effective and efficient Dehydration (Degassing) System 2. High precision Filtering System 3. Powerful double stages vacuum system 4. Electrical apparatus controlling System 5. High quality components 6. Diverse design in the structures and functions. The machine is available in mobile or stationary options. Various sizes and configurations (alloy shield) available. Available Style 1. Fixing type, mobile type with four wheels and mobile type with trailer 2. Normal appearance type, shelf-covering type and explosion-proof type 3. Available in deferent color.
Introduction: This filtration plant is special for filtering waste cooking oil; it removes impurity, odor, water, acid and alcohol etc. from oil completely and effectively. Treated cooking oil color is limpidity, oil is good smell. This filtration plant is suitable for food factory, cooking oil factory, vegetable oil factory, it can help factory reclaim remnants oil. Also, TPF is a good filtration part for bio-diesel oil making. The machine feature and working process: 1. This plant composed by two parts, one is the press filter, and other one is the vacuum oil purifier system. The press filter can remove the big and tiny impurity; the precision of purification can reach to 1 Micro. The Vacuum system equips three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition. 2. For the primary filter, which is made of the stainlessness steel, it is anti-rust and anti-corrupt, it mainly removes the residual impurity which escape from the press filter, making sure the oil have not any impurity when it goes into the water separator and vacuum separator. 3. The water separator, which equips the special filter, which mainly remove the mass water from the oil, because usually the waste cooking oil always contains much water, so we need remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water. 4. After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, Because our machine works under the vacuum and low pressure condition, so it dont need heat the oil to 100 C, usually it just need heat the oil to 45 C, Then it can remove the tiny water, soluble water, acid, alcohol and other volatility liquid and so on completely and effectively. 5. The fine filer, which is equips the stainlessness steel filter, the purification hole is less then 1 Micro, which can make sure the oil is completely clear, no any impurity. Table Parameters: Parameters Unit TPF -10 TPF -30 TPF -50 TPF -100 Flow rate L/H 600 1800 3000 6000 Vacuum degree Mpa -0.06 ~- 0.095 Working pressure Mpa í_0.4 Working Temperature C 0~80 Clean Degree NAS 6 Grade Impurity Size ª¦m 1 Gas Content % 0.1 Acid Value mKOH/g í_0.05 Water content PPM í_10 Working noise dB(A) í_75 Electric heating power KW 36 55 72 84 Total electric power KW 50 68 86 98 Inlet (outlet) caliber mm º¦25 º¦25 º¦32 º¦42 Size mm 1700x1050x1750 1800x1050x1800 1800x1150x1800 2000x1250x1950 Weight Kg 650 720 880 1000
Features: 1. Use of special metal materials which is compatible with fire-resistant oil, combined with technologies of vacuum dewatering, multi-stage filtration system and new adsorbent 2. Stainless steel machine body, pipes and filtering components, reliable, anti-corrosion, durable. 3. Duplex-stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively remove water, gas, particles and volatile matter 4. Advanced medium cooling system 5. High quality filtering components, large capacity for holding particles, anti-corrosion, good mechanical performance, long lifetime. 6. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
Application: ZY Series is specifically designed for purifying insulating oil, such as transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied in power station, transformer substation, railway, petroleum, chemical and metallurgy. Also it is the best choice of filling oil into power equipment and drying moistened power equipment. Features: Ideal for insulating oil clean up and transfer Eight models are available to accommodate various flow rates Continuously removes free water down to 5 ppm or less Fluid cleanliness grade (NAS) to 6 or better Dual water and particulate removal Improve oil dielectric values Advanced demulsification technology Coalescence-separation technology Duplex 3D evaporation technology Double-infrared fluid level controller A trinity of interlocked preventive device Carbon fiber infrared heating system Automatic back-flushing system. Unique H.P.M high molecule absorption material Explosion-proof type available Live-line operation feasible Advantage:. This model is tailored according to the nature of insulating oils, so it can effectively remove liquid, solid and gas impurities from used oil, expanding the service life of oil and the operating efficiency of machinery. The recycling process also enhances oil quality and restores oil viscosity.
Feature: 1, This machine is small, hi-efficient conveniently. And it can live operated with electrical, vacuum oiling the power equipment and dry moisture of power equipment. 2, This machine equips with infrared liquid auto-control device, which can have the balance the quantity of outlet oil and inlet oil, so this machine can operate on-line without person.
Zn vacuum turbine oil regeneration purifier Application The products absorb free carbon, gelatinous substance by macromolecule to reduce the cost and advance product quality. It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This products, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oilí»s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oilí»s nature. Features 1.The capacities of dehydration and degas are great, and assure of eliminating kinds of gas. 2.To absorb free carbon, gelatinous substance by macromolecule to reduce the cost and advance product quality. 3.Prolong the life of the device 4.Breaking emulsification thoroughly with high- molecule polymeric material. 5.Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
Zy series high efficiency vacuum oil purifier The zy series high efficiency vacuum oil purifier has been developed as a conditioner for dielectric oils which is used in the transformer, circuit breaker, switch gear, and mutual inductor. It removes free and dissolved water, dirt, free and dissolved air/gases, mechanical impurities which can recover the dielectric oilsf+ parameters. This portable unit is compact and easy to use. The zy series oil purifier provides a wide range of opportunities for cost savings including: increase equipment uptime, improved machine performance, reduced component replacement costs, reduce maintenance costs, and lower oil replacement and disposal expense. Wooden caese
Zy highly efficient vacuum oil purifier The purifier can remove water, gas and impurities in oil with high efficiency to raise the withstand capability and quality of oil, and ensures a safe operation of power generation equipment, being widely applied to power supply industry and manufacturing enterprise for treatment of non-conformable transformer oil, mutual inductor oil and circuit breaker oil Wooden case
Two-stage vacuum oil purifier - zyd ZYD serial double stage vacuum oil purifier is manufactured as per standards which go beyond Chinese legal mandates, the super big absorptive two stage vacuum purifies all insulation oil of power equipment rapidly and in more depth which removes water, gas and impurity in the oil rapidly and effectively with the support of high vacuum and absorption speed. Thus the strength of insulation oil is much increased and the time for oil treatment is shortened. Features: 1. Manufactured as per standards which go beyond the legal mandates, a primary breakdown voltage can raise 35KV and reduces the harm to the oil caused by normal purifiers due to repeated heating. 2. Big absorption speed double vacuum satisfies the needs of vacuumizing of transformer on an installation or repair site, and the water/gas removal of transformer oil can be completed at same time which shortens significantly the time for oil treatment. 3. A unique gas/water removal system adopting stereo-evaporation technology which rapidly separates the water and gas content in the oil and the system is free of maintenance. 4. A superior purification system with top quality filter core, which can accommodate large quantity of dirt and is densified progressively step by step. The filter core has got a high precision and multi-stage filtration. 5. Imported parts are used for all electric system which ensures operation of the equipment with high performance. 6. An advanced infrared liquid level control system with automatic control, allowing separated operation of manual operators from a machine. 7. Purifiers are equipped with an interlocked safety protective device. I. E, backflow of A oil outlet over pressure can be achieved via an overflow valve, B oil inlet will interlock with heating system which avoids any possible negative impacts caused by mal-operation. 8. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met. Wooden case
ESPO CRUDE OIL ORIGIN: KAZAKHSTAN Min. Quantity: 2,000,000 Barrel Max. Quantity: 5,000,000 Barrel per Month CIF Price: USD 95/Bbl. Gross USD 93 /Bbl. Net FOB Price: USD 88/Bbl. Gross USD 86/Bbl. Net Commission: USD 1Buyer side - USD 1 Seller side
Terminals and connectors, different kinds of dried food, tomatoes, apples, olive oil.
BLCO for sale @ Platts minus -$4 PROCEDURE: BLCO FOB ROTTERDAM 1. The final agreed contract (SPA) in electronic version which is binding both Parties is mutually signed, sealed and registered in Sellers and Buyers banks within 1(one) 2(two) Banking Days after signing. Both banks must be Top50World listed and act under full banking responsibility, except Chinese banks, or others mutually agreed. Seller issues Proforma Invoice plus Platts daily price index and send with SGS / Storage Facility information (including contact details) for Buyer to verify Sellers Ownership verbally at tank storage or SGS no report just a call to them. *) The Buyer and the Seller sign Invoice. 2. Within 5 (five) banking days from contract been lodged in the banks, the seller shall deliver by express courier mail an envelope with original POP documents, to the buyer�´s Bank with electronic copy to the buyers email. The set of POP documents to be enclosed after receiving the RWA from the buyers bank are including the following documents: a. Commercial Invoice together with Copy of Platts price indication for the day of issue b. Copy of TSR c. Injection Report pumping in Tanks (SGS Q&Q) d. Fresh Q&Q issued by SGS or similar at Rotterdam e. The ATSC issued by NNPC as per delivered format f. The Certificate of Origin g. Confirmation for Tank farm, that Seller has full control on this Cargo to be issued by NNPC in Original h. Unconditional Dip Test Authorization i. ATV. j. The NNPC statement that the TSA (at least with 3 day´s free, if tanks are longer needed we have to pay for, three days are free to discharge), will be delivered after SPA is mutually signed and sealed k. Written consent from the Storage Company for the existing storage contract with the seller, to be assigned to the Buyer. The Insurance Policy in three copies assigned to the Buyer as beneficiary while an original to be lodged at the sellers bank, to be exchanged for payment 3. The Buyer dips the tanks 4. The Seller issue Final Invoice together with updated daily Platts index extract 5. Within 3 (three) banking days from receipt and verification of the POP documents Buyers bank issues to the Sellers bank the Ready, Willing and Able (RWA) to secure payment for the commodity 6. Within 3 (three) banking days Sellers bank after verification of RWA, transfers the set of payment documents and Buyers bank issue the Pay Order in DAP (Documents Against Payment) format 7. Buyer takes over the Commodity inside the Storage Tanks.
Product name: Soybean oil Packaging: 1L, 3L, 5L Bottles, Flexi Tank Place of origin: Ukraine Contact name: Roman Borovenskyi
