Solvent Yellow 82 from company: oopscolor from oopscolor mouse 163 com Product Name: Oil soluble yellow KR C.I. Solvent Yellow 82 CAS.NO. 12227-67-7 �£?? Chemical Family: Monoazo , series �?� Metal Complex�?� Chroma slight red light yellow Sunlight 6 to 7 grade Shade: Bluish Yellow powder Foreign relative brand:�?� Neozapon Yellow 157(BASF)�?� (KKK)Valifast Yellow 4120/4126 Technosol Yellow R (TCC) Rosafast Yellow MR(ROSE) Solubility(g/L): Methyl Alcohol Ethyl Alcohol Isopropyl Alcohol DAA N-Butyl Alcohol Ethyl Acetate Tolueno Xylence Butanone MIBK Ethocel Cyclohexanone Light Resistance 400 300 500 400 500 500 500 400 500 500 490 500 400 Strength: Light Resistance Heat Resistance Acid Resistance Alkali Resistance 6-7 A A A The application of metal complex solvent dyes Ink: solvent based ink ,printing ink for Aluminum foil ,printing ink for paper and the surface of metal (screen printing ) Coating industry:1.Wood stains coating� 2..Aluminum foil coloring(hot stamping material) � 3.metal coloring (low temperature baking finishes ).4.special coating Other industry : 1.ink for ball pen and stationery 2,plastic coating (vacuum plating ) 3. Leather coloring 4:shoes polish coloring oopscolor mouse 163 dot com Properties 1. Excellent solubility 2. Good compatibility(with most resins) 3. Bright in colour 4. Excellent resistance 5. Free of heavy metal 6. Have liquid form Package: 25kg/drum or 5kg/ box, carton drum or box. Attention : according to the detailed usage
Acrylic resin impact modifier ACR 1.Introduction Impact modifier ACR-IM product line is a new generation of core-shell acrylic copolymer, the core layer of glass temperature is -50 - 55 The series of impact modifier-impact modifier and processing to improve performance in one, to increase the products of weathering and surface gloss, anti-aging properties, especially suitable for outdoor use products, widely used in the profile, non-transparent sheet, plate , Pipe, PVC pipe, and other indoor and outdoor products. 2.Physicochemical properties Specification Item IM-10 IM-20 IM-30 Appearance White freely flowing powder Granularity (percent of pass at 20 mesh) % 98 Volatility% 1.2 Apparent densityg/ml 0.40-0.55 Core glass transition temperature -50 -48 -55 3.Characteristics (1)Excellent weatherability. (2)Excellent impact resistance (3)Excellent processability 4.Use direction IM-10 has a normal processing performance and high resistance to impact and the need to use a small amount of processing aid; IM-20 has a high processing performance and better impact resistance and, without the use of a processing aid; IM -30 Do not have the processing performance, but with excellent impact performance, need to use of processing aid. 5.Recommended dosage Product Profiles Pipes fittings Plates Recommended dosage 6-7 6-9 3-6 6-7 6.Storage, packaging, transport This product is packed in sealed plastic bags and then put into weave bags, the bags with product certification, packaging bags external annotated: trademarks, manufacture, product weight.
Dry Transformers up to 3.6 MVA, 33 KV (Indoor & Outdoor) EGYTRAFO Group produces a wide range of Dry type Cast Resin transformers up to 3.6 MVA, 33 KV which are suitable for indoor and outdoor installation (inside an enclosure with certain IP) and ambient temperatures up to 45oC. Dry type transformers is a reliable alternative for oil immersed transformer with low running costs, free maintenance, environmental friendly and suitable for operation under heavy load fluctuations. * Different types: Impregnated LV, Casted HV Casted LV, Casted HV Al â?? Al winding (Aluminum) Cu â?? Cu winding (Copper) * Cooling Methods: Air Natural (AN) Air Forced (AF) : Increased Power by 35-40 % * General Characteristics & Advantages: Fire resistance : In locations where the fire risk associated with the use of mineral oil is unacceptable like offices, shopping complexes, apartment buildings, hospitals etc. Maintenance free: No liquids/oil to contaminate, break down, leak or explode and burn Insensitive to moisture High overloading capacity Long and stable lifetime Installation close to load centers (maximum safety) Easy to connect and install Immediate switch-on Easy to repair No special requirements for installation room Environmentally safe Hardly inflammable Low operational cost and service expenses High performance, reliability and high short circuit strength * Field of Applications: Transportation means as railways underground, trams, and tunnels Locations with vibrations and shocks (like ships and cranes) All products comply to IEC standardsKEMA Certified
Aluminium Coil for Roofings PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF Coated Aluminium PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
METAL BODY Although the material thicknesses and types we use vary according to the customer's request, our company has a quality in its own standard. The main body of the wing body is 0.9 mm sheet metal, and 3 vertically bent sheet reinforcements of 0.9 mm and 1.5 mm sheet reinforcement are made to the hinge and lock part to support the sheet metal against heavy and strong impacts. METAL BODY SURFACE Laminate Coating Laminate is a flooring material obtained as a result of compressing papers impregnated with artificial resin solution by placing them on top of each other and compressing them with the hot pressing method. Laminate is an affordable and easy to install coating, so it is one of the most preferred coating methods. Laminate surface does not need varnish or varnish like solid wood. Wood Covering The patterns in the coatings change according to the tree species. Thus, the arts made on wood veneers are reflected in the furniture. It offers a different beauty thanks to its unique structure and texture. Due to the trees that grow in different species according to the region, the wood, which always provides unlimited design possibilities, takes its final form with wood coatings. Wood can be preferred in order to make your place more aesthetic. However, it is shown as one of the healthiest products due to its moisture balance. INSULATION AND INSTALLATION Ceramic Wool Ravatherm Ceramic Wool is a thermal insulation material consisting of long, flexible and interwoven fibers produced by spun (twisting and twisting) for applications between 750�°C and 1430�°C. Ceramic Wool; It is obtained by melting and combining aluminum, silica, zirconium raw materials at high temperature. Ravatherm Ceramic Wool blanket; It is used in industrial furnace insulation, in the insulation of boiler pipes and chimneys, in all kinds of technical insulations that require high temperatures.
Brief Introductions: Type: 6A2 Bond: Hybrid Application: Powerful Grooving Specification: Customized Packages: Hard carton Delivery Time: 15 workdays by express Introductions of Hybrid Grinding Wheel The new hybrid bond features a remarkable stock removal ability, allowing for reductions in grinding cycle times and improved dressing frequency. This bonding ensures good profile retention and a low and constant power absorption. The trend in Carbide Drill / Endmill manufacturers is clearly towards high productivity and consistent quality. This has put great demands on the Diamond wheel manufacturers to come up with wheels which can grind faster, put less strain on the machine and Job that is being ground. offers a perfectly matched range of and CBN wheel that allow you to take full advantage of the CNC machine to manufacture your cutting tools. These wheels are made of a new generation HYBRID bond. Advantages of Hybrid Grinding Wheel Hybrid owns both: strengths of Resin and Metal showing excellent grinding ability with long lifetime and shape holding. Hybrid Bond achieved a single pass at double the feed rate with no damage to the workpiece while achieving a 25% increase in finish. The Hybrid Series for Tool & Cutter Grinding uses Advanced Bond technology, allowing for a quicker grind without losing the wheel edge. Flute from solid, regrind, gash and end work, and relief. Excellent precision at the highest feed rates Increased productivity while lowering process costs Superior wheel life and long dressing interval Withstands cutting forces from high-speed, high-temperature applications Service: Detailed Specifications can be customized! Provide after-sales service. Technical support on usage. Return and exchange of products for non-human reasons.
glasswool board besides heat insulation and thermal insulation, it has other advantages such as excellent damping and sound absorption, especially for intermediate and low frequency and all kinds of noise concussion, noise reduction and working environment improvement. The materials can be cut at random according to the construction requirement. It is mainly used on the following aspects: rooms of buildings, sound reduction system, mean of communication, refrigeration equipments, damping, and sound absorption and noise reduction of domestic electric appliance, which has a satisfactory effect. complete Glasswool insulation board is made by adopting unique centrifugal technology and adding environmental adhesives of thermosetting resins-based into molten glass fibrosis. It is a kind of elastic glass fiber product made of glass fiber with diameter of only a few microns, and we can also choose moisture-proof facing on-line compound according to customers' requirements. Because of a large number of tiny air interspaces, it has the functions of heat insulation, sound absorption, safe guarding and etc, so it is the best materials of heat insulation and sound absorption in construction. Glasswool insulation board production lines range from 5 to 700 tons/day capacity (100,000 to 1,500,000 tons/year), and are fully automated thanks to PLC and Scada systems. Distinctive Advantages of Glasswool Insulation Board: Sound absorption and noise reduction. Easy for construction; cutting at will. Grade A1 fireproof. Low moisture absorption; stable physical properties. Strong vibration resistance and high durability.
glasswool board besides heat insulation and thermal insulation, it has other advantages such as excellent damping and sound absorption, especially for intermediate and low frequency and all kinds of noise concussion, noise reduction and working environment improvement. The materials can be cut at random according to the construction requirement. It is mainly used on the following aspects: rooms of buildings, sound reduction system, mean of communication, refrigeration equipments, damping, and sound absorption and noise reduction of domestic electric appliance, which has a satisfactory effect. complete Glasswool insulation board is made by adopting unique centrifugal technology and adding environmental adhesives of thermosetting resins-based into molten glass fibrosis. It is a kind of elastic glass fiber product made of glass fiber with diameter of only a few microns, and we can also choose moisture-proof facing on-line compound according to customers' requirements. Because of a large number of tiny air interspaces, it has the functions of heat insulation, sound absorption, safe guarding and etc, so it is the best materials of heat insulation and sound absorption in construction. Glasswool insulation board production lines range from 5 to 700 tons/day capacity (100,000 to 1,500,000 tons/year), and are fully automated thanks to PLC and Scada systems. Distinctive Advantages of Glasswool Insulation Board: Sound absorption and noise reduction. Easy for construction; cutting at will. Grade A1 fireproof. Low moisture absorption; stable physical properties. Strong vibration resistance and high durability.
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg Packaging: Each roll is wound on paper tube (3"-4"Dia.) with plastic film and packed in individual cardboard box. 16 or 12 cartons per Pallet. The strength of fiberglass stitched mat is stronger than CSM,the price is cheaper. We export large quantity for pipe winding.We can provide big roll to reduce your replacing frequency and save your cost.We suggest stitched mat instead of chopped strand mat for pipe application. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Simultaneous Injection-Decoration System (IMD/IML) : This technology widely used in automotive (mobility), consumer electronics, home appliance and medical devices, and supports customer to achieve unique CMF finish on mechanical parts with high quality and productivity. IMD, IML are products which add patterns and functions on the products surface at the same time as molding, by sandwiching a film with patterns or functions in a mold and pouring the melted resin into it. We can provide unique features on your product surface which cannot not be added by conventional process like painting, silk printing or pad printing. We can even add electric functions such as touch sensors / buttons and LEDs to your product surface with NISSHA IME solution. IME (In-mold Electronics) is a module product which integrates touch sensors, light source heater, etc. into a plastic panel. We can also do general molding with variety of colors, materials and finishes that suit your preference. If you already have in-house injection molding machine, we can also source you high quality heat transfer foils. Application: automotive display, CID, touch screen, car ornament, auto accessories, console, headlamp, audio panel, automotive interior, automotive exterior Pattern : Hair Line, Marble, Wood grain, Leather, Fabric, Metal look Feature : Hard coat, 3D Geometry, Hidden lit, Touch sensor Size : various sizes Capacity :100 - 650 tonnage injection molding Additional functions: Anti
Product information Product name:Tonex white SWN Color Index No: C.I.140 Synonyms: FBA 140; OBA 140,Fluorescent Brightener SWN; Optical Brightener Agent MDAC, Optical Brightener MDAC Molecular Structure: Molecular Formula : C14H17NO2 Molecular Weight: 231.28 CAS No 91-44-1/61968-71-6 C.I. No.: C.I.140 Appearance off white powder Melting point :70.5-73 Assay: 98% Fineness 200 meshes Features: 1.Multipurpose brightener with excellent whiteness, soluble in ethanol but insoluble in water. 2.having properties of good solubility and compatibility. Applications This product is mainly used for whitening of wool,natural silk, nylon, acetate fiber and triacetate fiber. It can also be usedfor whitening of cotton and cyanamide, and can be used for whitening ofcellulose fiber by adding resin. Reference dosage: The dosage is: nylon 0.05-0.3%, wool 0.05%-0.35%,acetate fiber 0.05-1.4%, triacetate fiber 0.1-2%, cylandex 0.05%-0.8%. In addition, this product can be added to soap and detergent for washingfabrics, effective in the PH=3-11 range, can improve the appearance of thefabric after washing. It can also be used for coated paper, plastic andchromatic printing coatings. Package & Storage: 25kg fiber drumor for the special demand . Should be storedin cool, dry and ventilate place, and storage time should not exceed 24 months
Garden victorian gazebo greenhouse is always used as warehouse, plant room, wedding room, meeting room, coffee room, farm house, sitting room and winter garden house. The roof material of this model is transparent polycarbonate solid sheet. The sunlight can enter into the greenhouse easily. There are many color of solid sheet for your selection. Solid Polycarbonate Sheets are made from strong, lightweight thermoplastic synthetic resin material that is extruded into solid sheets. Solid polycarbonate sheet is ideal for roofing projects that require a lot of sunlight due to its high transparency. The gazebo greenhouse is the pinnacle of expressive half-wall greenhouse engineering. The greenhouse brick base is custom made and can be tailored to your specific garden requirements. Victorian style greenhouses offer a lot of height for you and your plants. A Victorian-style greenhouse is where you can keep your favorite plants for all seasons. Thanks to its glass design, the area is filled with natural light while remaining weatherproof, allowing you to encourage the development of plants from all over the world. Fruit trees and tropical vegetation thrive in the greenhouse microclimate. Our Victorian-style greenhouses come in a variety of sizes and unique styles to fit your landscape. Advantages High light transmission Solid polycarbonate is noted for its extreme clarity which gives you unparalleled light transmission. It comes with UV protection to prevent yellowing and clarity due to constant exposure to sunlight. Lightweight Polycarbonate solid sheets weigh only half the weight of glass panels of the same size and width, making them cheaper to ship and install. High impact strength Polycarbonate solid sheets provide more strength and stability than other types of plastic sheets or hollow polycarbonate sheets. Its impact strength is estimated to be around 200 times that of common glass, and around 10 times stronger than tempered glass. Flame retardant Solid sheets give you peace of mind as they are self-extinguishing and do not amplify flames or give off toxic gases.
Customized Plastic Injection Molding Machine For Sale Rubber Mould Machine Manufacturers Overview Essential details Model Number: R002 or OEM Shaping Mode: Plastic Injection Mould Product Material: Steel Product: Mould Product name: Plastic Injection Mould Mold Steel: 1.2311,1.2738,NAK80,1.2344,S136,SKD61 etc. Material/Resin: ABS,PP,PC,PVC,POM,PA6,TPU etc. Color: Natural color or as client request Size: Customized Size Packing: Wooden box or as request to pack plastic mold. Drawing Format: STP, IGS, CAD, PRT, Certificate: ISO 9001: 2015 Certificated, RoHS, COA Supply Ability Supply Ability 50 Set/Sets per Month Packaging & delivery Packaging Details In strong wooden pallets to avoid any damages during the long transportation Lead time: Quantity(sets) 1 - 10 10 Lead time (days) 30 To be negotiated Customized Plastic Injection Molding Machine For Sale Rubber Mould Machine Manufacturers Product Description Name: Mould Plastic Material Type: ABS, ABS+PC, PP, PS, POM, PVC, TPE, TPU, Acetal,PA6.6,PA6,PA6.6+30GF,etc. Mould Steel: Assab, AISI & JIS, ALCOA,S136, 1.2311, 1.2738, NAK80, 2344, 420, 2083 Mold Base: HASCO standard, DME standard, LKM standard, Cavity No: Single, Multi Cavity, Change Insert Surface Treatment: Zinc plating,nickel plating, chromium plating,brass plating,decromet, etc. Mould Texture: EDM,VDI 3400 Code ,MOLD-TECH, Texturing,Cavity ,Core Finishing,High Polish, mirror face, Grade 3 Diamond, Paper Finish, Stone Finish. Type of Gate: Cold Runner, Hot Runner, Sprue Gate, Edge Gate, Pin Point Gate, Sub Gate Type of Ejection: Pin, Ejector Blade, Stripper, Ejector late, Ejector Sleeve, Lifter, Pneumatic Ejector.
Overview Essential details Model Number: U001 or OEM Shaping Mode: Plastic Injection Mould Product Material: Steel Product: MUD Mould Product name: Plastic Injection Mould Mold Steel: 1.2311,1.2738,NAK80,1.2344,S136,SKD61 etc. Material/Resin: ABS,PP,PC,PVC,POM,PA6,TPU etc. Color: Natural color or as client request Size: Customized Size Packing: Wooden box or as request to pack plastic mold. Drawing Format: STP, IGS, CAD, PRT, Certificate: ISO 9001: 2015 Certificated, RoHS, COA Supply Ability Supply Ability 50 Set/Sets per Month Packaging & delivery Packaging Details In strong wooden pallets to avoid any damages during the long transportation Lead time: Quantity(sets) 1 - 10 10 Lead time (days) 30 To be negotiated OEM Plastic Injection Mold Die Cast Product Description Name: Mould Plastic Material Type: ABS, ABS+PC, PP, PS, POM, PVC, TPE, TPU, Acetal,PA6.6,PA6,PA6.6+30GF,etc. Mould Steel: Assab, AISI & JIS, ALCOA,S136, 1.2311, 1.2738, NAK80, 2344, 420, 2083 Mold Base: HASCO standard, DME standard, LKM standard, Other Cavity No: Single, Multi Cavity, Change Insert Surface Treatment: Zinc plating,nickel plating, chromium plating,brass plating,decromet, etc. Mould Texture: EDM,VDI 3400 Code ,MOLD-TECH, Texturing,Cavity ,Core Finishing,High Polish, mirror face, Grade 3 Diamond, Paper Finish, Stone Finish. Type of Gate: Cold Runner, Hot Runner, Sprue Gate, Edge Gate, Pin Point Gate, Sub Gate Type of Ejection: Pin, Ejector Blade, Stripper, Ejector late, Ejector Sleeve, Lifter, Pneumatic Ejector.
Essential details Model Number: R005 or OEM Shaping Mode: Plastic Injection Mould Product Material: Steel Product: Mould Product name: Plastic Injection Mould Mold Steel: 1.2311,1.2738,NAK80,1.2344,S136,SKD61 etc. Material/Resin: ABS,PP,PC,PVC,POM,PA6,TPU etc. Color: Natural color or as client request Size: Customized Size Packing: Wooden box or as request to pack plastic mold. Drawing Format: STP, IGS, CAD, PRT, Certificate: ISO 9001: 2015 Certificated, RoHS, COA Supply Ability Supply Ability 50 Set/Sets per Month Packaging & delivery Packaging Details In strong wooden pallets to avoid any damages during the long transportation Lead time: Quantity(sets) 1 - 10 10 Lead time (days) 30 To be negotiated Product Description Name: Mould Plastic Material Type: ABS, ABS+PC, PP, PS, POM, PVC, TPE, TPU, Acetal,PA6.6,PA6,PA6.6+30GF,etc. Mould Steel: Assab, AISI & JIS, ALCOA,S136, 1.2311, 1.2738, NAK80, 2344, 420, 2083 Mold Base: standard, DME standard, LKM standard, PUNCH, , Other Cavity No: Single, Multi Cavity, Change Insert Surface Treatment: Zinc plating,nickel plating, chromium plating,brass plating,decromet, etc. Mould Texture: EDM,VDI 3400 Code ,MOLD-TECH, Texturing,Cavity ,Core Finishing,High Polish, mirror face, Grade 3 Diamond, Paper Finish, Stone Finish. Type of Gate: Cold Runner, Hot Runner, Sprue Gate, Edge Gate, Pin Point Gate, Sub Gate Type of Ejection: Pin, Ejector Blade, Stripper, Ejector late, Ejector Sleeve, Lifter, Pneumatic Ejector.
Chemical name: Dioctyl terephthalate Cas No.:6422-86-2 Einecs No.:229-176-9 Relative Molecular mass: 390.5 Molecular Formula: C24H38O4 Product specifications: Parameter Unit Methods Specifications Color, Pt-Co Hazen GB/T 1 664. â?¤30 Acid Va lue : mgK0H/g GB/T 1 668 â?¤0. 07 Dens ity (20�°C) g/cm3 GB/T 4472 0.981-0. 985 Water content wt% GB 11133 â?¤0.1 Flash point �°C GB 1671 â?¥210 Ester Content wt% GC â?¥99.0Major performance: 1.Dotp is a sort of high-performance primary plasticizer with good electrothermal properties. Its volume resistivity is ten-twenty times of DOP's. Good plasticating effect and low volatility on cable materials makes it be widely used on the heat-resisting, high insulation product. It is the ideal plasticizer for the production of 70 degrees C. cable material and other volatility-resist PVC products. 2.Meanwhile it has favourable cold-resistance, heat-resistance, extraction-resistance performace, with low volatility and high plasticizing efficiency. In its downstream products, good durability, soap water resistance and softness in low temp. was been found. It is suitable for the plasticizer of PVC resins, such as high-insulation PVC cables. 3.This product can be mixed with DOP at free percentage. 4.This product can reduce viscosity and increase preserve life in the application of plasticized paste. Application Guide: Widely used in cable materials, insulating wires, high-grade paint, coating, PVC gloves, artificial leather, etc.
NEOFLON PFA AP-Series NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom. It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins. Grades and Features of AP-Series Grades MFR (g/10 min.) Features AP-201 20 - 30 Superior in melt flowability. Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44). AP-202 65 - 80 Excellent melt flowability. Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52). AP-210 10 - 17 Good melt flowability. Suitable for injection molding. AP-230 1.5 - 2.5 Superior in stress crack resistance. Suitable for extrusion and transfer molding. AP-201SH 20 - 30 High purity grade. Superior in melt flowability. Suitable for complex shape articles. AP-211SH 10 - 17 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for joints and parts for pumps. AP-215SH 10 - 17 High purity grade. Suitable for injection molding. Suitable for joints and parts for pumps. AP-231SH 1.5 - 2.5 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for extrusion and transfer molding. AP-210AS 11 - 14 Anti-static grade. Suitable for injection molding. AP-230AS 1.5 - 3.0 Anti-static grade. Suitable for extrusion molding. AP-230ASL 1.0 - 2.5 Anti-static grade. Suitable for extrusion molding.
Product Name : Insulating material for wires and cables Product Description : The ordinary 70 â?? -90 â?? PVC insulation and sheath materials developed by Zibo Qiwangke Industry and Trade Co., Ltd. are based on high-quality Qilu PVC resin, and add appropriate amounts of plasticizers, lubricants, stabilizers and other processing aids. The plastic granules obtained by mixing and extrusion granulation have excellent physical and mechanical properties, insulation and dielectric properties, and good processing properties. The cables processed with this product can meet the requirements of users, and can be widely used in subways, airports, power stations, high-rise buildings, computer centers, television centers and other places that require high cable requirements. Price of product ( USD price or FOB price) : USD920- USD980 per MT FOB Qingdao,China Product origin : Zibo,Shandong,China Key Specifications/Special Features : The PVC insulation / sheathing material produced by our company has good processing performance, there are no special requirements for extrusion equipment, and it can be processed by ordinary PVC cable extruder. The process conditions can be based on the extrusion process of ordinary PVC cable material. The applicable process temperature range is wide, has excellent processing stability, and the formed cable has good appearance and insulation properties. Minimum Order Size and Packgaing details : The company's products are standard color or specific color granules. They are packed in three-in-one composite packaging bags and film inner village bags. The net content of each bag is 25 �± 02Kg. Avoid rain and introduction of impurities during transportation. This product should be stored in a clean, cool, dry and ventilated warehouse.
