PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
1. Product Introduction The polytetrafluoroethylene (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. They are suitable for semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear scales for easy observation, and the pointed mouth is convenient for pouring solutions. 2. Product Features: 1. Transparent, with raised scales, chemical resistance and heat stability, resistant to various acids, alkalis, HF and organic solvents; suitable for storing chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in accordance with DIN EN 285. The flange design is convenient for clamping and moving, and has the function of dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquid; it uses high-purity raw materials, is easy to clean, and can be used with our company's electric heating plate and digester 3. High thermal stability, good transparency, and smooth surface; 4. It is often used as a reaction container for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a vessel for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200+260; no record Memory effect; 7. Anti-pollution: low blank value of metal elements; 8. Suitable for trace, ultra-trace analysis, isotope analysis and other laboratories, it is a clean experimental analysis vessel; 9. It meets the requirements of laboratories or testing institutions, medical testing, trace testing, etc. for experimental equipment, and is suitable for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); III. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes and other products. Nanjing Binzhenghong Instrument Co., Ltd.
1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has a rapid heating speed, which can quickly increase the temperature of the digestion solution and shorten the sample processing time. No Cross-Contamination: It allows for the simultaneous processing of multiple samples without causing cross-contamination. Reduced Metal Components: The DBF-type electric hotplate's supports are made entirely of polytetrafluoroethylene (PTFE), significantly reducing the entry of metal parts into the laboratory. Customizable Features: It offers customizable time-setting functions, segmented temperature control, and can be processed with different board surfaces according to requirements. Intuitive Display and Safety Functions: The liquid crystal display (LCD) offers features such as buzzer alarms and automatic power-off for added safety. Easy Operation and Maintenance: The anticorrosive electric hotplate has a simple structure, making it easy to operate and maintain. Energy Efficiency and Environmental Friendliness: Compared to traditional heating methods, it has higher energy utilization efficiency, reducing energy consumption and environmental pollution. In summary, the anticorrosive electric hotplate from Nanjing Binzhenghong Instrument Co., Ltd. offers superior performance in terms of corrosion resistance, heating speed, safety, and energy efficiency, making it an excellent choice for various laboratory applications.
PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
Caustic Soda with a chemical formula of NaOH and scientific name of Sodium Hydroxide is an Inorganic Compound. It is hygroscopic and has high caustic metallic base along with Sodiums Alkali. Its color is solid white with a melting point of 318�¯�¿�½?�?�°C and is available in various forms such as Pallets, Flakes and Granules. Caustic Soda or Sodium Hydroxide is highly versatile and hygroscopic and it absorbs Carbon Dioxide and Sulfur Dioxide from the air along with the moisture to form an aqueous solution. It is an odorless substance and can easily dissolve in the water, methyl and ethyl alcohols and when diluted, it generates a considerable amount of heat of dilution. Being a strong electrolyte and extremely alkali with Caustic as a base can also cause a serious chemical burn. Caustic Soda finds its application in Textile, Petroleum and Aluminum Industry, Paper and Pulp Industry, Iron and Steel Industry and also in Water Purification and Chemical Processing. Some other uses are in Soap, Detergents, Food and Mining and in Glass industry. Jyoti Chemical provides you with top notch quality of Caustic Soda Flakes, liquid, Solid, Granules, Powder and Crystals. Our Caustic Soda is been processed with best raw materials and is pure and has free flowing white pieces. It's been more effective because of accurate composition and has high metallic base due to top quality raw materials used. Jyoti Chemicals since many years is known for its best quality products and timely services.
Caustic Soda with a chemical formula of NaOH and scientific name of Sodium Hydroxide is an Inorganic Compound. It is hygroscopic and has high caustic metallic base along with Sodiums Alkali. Its color is solid white with a melting point of 318�¯�¿�½?�?�°C and is available in various forms such as Pallets, Flakes and Granules. Caustic Soda or Sodium Hydroxide is highly versatile and hygroscopic and it absorbs Carbon Dioxide and Sulfur Dioxide from the air along with the moisture to form an aqueous solution. It is an odorless substance and can easily dissolve in the water, methyl and ethyl alcohols and when diluted, it generates a considerable amount of heat of dilution. Being a strong electrolyte and extremely alkali with Caustic as a base can also cause a serious chemical burn. Caustic Soda finds its application in Textile, Petroleum and Aluminum Industry, Paper and Pulp Industry, Iron and Steel Industry and also in Water Purification and Chemical Processing. Some other uses are in Soap, Detergents, Food and Mining and in Glass industry. Jyoti Chemical provides you with top notch quality of Caustic Soda Flakes, liquid, Solid, Granules, Powder and Crystals. Our Caustic Soda is been processed with best raw materials and is pure and has free flowing white pieces. Its been more effective because of accurate composition and has high metallic base due to top quality raw materials used. Jyoti Chemicals since many years is known for its best quality products and timely services.
Caustic Soda with a chemical formula of NaOH and scientific name of Sodium Hydroxide is an Inorganic Compound It is hygroscopic and has high caustic metallic base along with Sodiums Alkali Its color is solid white with a melting point of 318C and is available in various forms such as Pallets Flakes and Granules Caustic Soda or Sodium Hydroxide is highly versatile and hygroscopic and it absorbs Carbon Dioxide and Sulfur Dioxide from the air along with the moisture to form an aqueous solution It is an odorless substance and can easily dissolve in the water methyl and ethyl alcohols and when diluted it generates a considerable amount of heat of dilution Being a strong electrolyte and extremely alkali with Caustic as a base can also cause a serious chemical burn Caustic Soda finds its application in Textile Petroleum and Aluminum Industry Paper and Pulp Industry Iron and Steel Industry and also in Water Purification and Chemical Processing Some other uses are in Soap Detergents Food and Mining and in Glass industry Jyoti Chemical provides you with top notch quality of Caustic Soda Flakes liquid Solid Granules Powder and Crystals Our Caustic Soda is been processed with best raw materials and is pure and has free flowing white pieces Its been more effective because of accurate composition and has high metallic base due to top quality raw materials used Jyoti Chemicals since many years is known for its best quality products and timely services
PFA acid purifier 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
Future Fortune is a leader in the design and manufacture of milling equipment for feed and grain processing, with thousands of installations to date. We optimize the performance of our equipment to meet the unique needs of feed processors, and we can produce the most tightly distributed uniform particle size with the least amount of dust. All equipment is available in carbon or stainless steel construction and can be custom configured to meet your material and production goals. Animal Feed Processing Equipment The main components of the feed mill equipment in the feed pellet factory are a feed mill, feed mixer, feed pellet machine, feed pellet cooler and feed pellet packaging machine. The auxiliary equipment of the feed factory includes conveyors, control cabinets, storage bins, dust collectors, fire-fighting equipment, etc. Equipment for Animal Feed Basic feed mill equipment operations to produce animal or poultry feed pellets include raw material receiving, grinding, batching, mixing, pelleting, cooling, screening, packaging and warehousing. Raw material receiving Feed mills are often equipped to receive grain and other raw materials for rail and truck shipments. Natural materials such as meat, fishmeal, fat, molasses and premixes are transported by truck, while grain and soybean meal are often fascinated by rail. Dry ingredients are received in bulk or in bags; liquid ingredients such as fat and molasses are pumped directly into storage tanks in the feed mill; elements such as bulk grain are conveyed by conveyors or bucket elevators to the cleaning machine to remove non-metallic foreign matter and metal impurities material, and then stored in the storage bin.
Introduction to the product CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system. Method of use The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.
English Name:Aluminum Chloride Other name:Aluminum Trichloride, Aluminum Trichloride Anhydrous, Aluminum Chloride Anhydrous Regular particle size: 60-120mesh, more than 16mesh ,2-10mm particles. CAS Number: 7446-70-0 ChemicalFormula: AlCl3 Molecular Weight: 133.34g/mol Product Description: The appearance is light yellow, yellow or slight gray particle or powder. Relative density is 2.44(25 degree),melting point is 190(253Kpa).It is non-combustion, easily soluble in water, ethanol, chloroform, carbon tetrachloride and slightly soluble in benzene.It has strong water imbibition and extremely to deliquescence if exposure in air. It is easy to absorb water and hydrolyze to hydrogen chloride. It has strong corrosivity, and can generate many inorganic and organic compounds. It is easy to decompose.. Application: 1.Used as catalyst in organic synthesis, such as medicine, dye, liquid crystal, spices, flame retardant, petroleum cracking, rubber synthesis and water treatment and so on. 2.Used to manufacture pesticide and organic aluminum compounds. 3.Used to metal smelting and lubricating oil synthesis. 4.Used as leavening agent in food grade products and flocculating agent in pectin. Storage and Transportation: Should be stored in cool, ventilated and dry warehouse, keep away from moisture. During transportation, it should be rainproof, can't be stored and transported with alkali and oxidant.When loading and unloading.it should handle with care to prevent packing damage. The shelf life is six months form the date of production. Specification: Test Item Standard Appearance Light yellow,yellow or slight gray partical powder Aluminum Chloride(ALCL3) 98.5%min Water Insoluble 0.05%max Iron(FeCl3) 0.05%max Heavy metal (Pb) 0.006%max Free Aluminum 0.010%max Packaging: N.W.25kg,50kg,350kg,500kg. Inner packaging: PVC plastic film lined bag.
Installed in the mixed Cutterhead or hard rock Cutterhead,It crushes the rock through the cutter rings rolling into the rocks in the excavated face. It is mainly used for full face rock strata or some composite formations.â?? Bearings: TIMKEN â?? Floating seal:Trelleborgâ?? Floating seal seat, left and right end cap material: 40CrNiMoA HRC36 ± 3â?? Mandrel material: 40CrNiMoA HRC42 ± 3â?? Oil type: Shell SHEL460DISC RINGSForgings are made by the closed die method as Germany. Subsequent processing consisting of two machining steps and four heat treatment steps are completed in China.The steel manufacturing processes are designed to keep impurities to the lowest.Melting in an Electric Arc Furnace is followed by vacuum degassing. Ingot molds are filled from the bottom with the liquid steel shrouded in argon gas. Exceptionally clean steel ensures high resistance to fatigue, resulting in longer cutter disc lifeBEARINGSCarburized and case-hardened, uses Timken tapered roller bearings that outperform other bearings in dynamically loaded conditions and harsh environments. During assembly, the bearings are pre-loaded to effectively excavate hard rock in the most severe operating conditions.SEALSDurable metal-to-metal face seals eliminate ingress of foreign materials while silicone torics maintain elasticity even at high temperatures.RETAINERThe patented compensation retainer has a superior piston design with a much larger surface area than other cutter manufacturers. The outer surfaces are carburized and case-hardened for extended life in harsh conditions.HUBMade of durable alloy steel, hubs are furnace heat-treated, quenched, and tempered for toughness. The disc-mounting surface is further induction hardened and finished by grinding.SHAFTshafts are made of the same alloy steel as the hubs, and go through an identical process of heat-treatment, quenching, and tempering. They are additionally gas nitride for surface hardness
Installed in the mixed Cutterhead or hard rock Cutterhead,Website:http://www.chinarzf.com, It crushes the rock through the cutter rings rolling into the rocks in the excavated face. It is mainly used for full face rock strata or some composite formations.â?? Bearings: TIMKEN â?? Floating seal:Trelleborgâ?? Floating seal seat, left and right end cap material: 40CrNiMoA HRC36 ± 3â?? Mandrel material: 40CrNiMoA HRC42 ± 3â?? Oil type: Shell SHEL460DISC RINGSForgings are made by the closed die method as Germany. Subsequent processing consisting of two machining steps and four heat treatment steps are completed in China.The steel manufacturing processes are designed to keep impurities to the lowest.Melting in an Electric Arc Furnace is followed by vacuum degassing. Ingot molds are filled from the bottom with the liquid steel shrouded in argon gas. Exceptionally clean steel ensures high resistance to fatigue, resulting in longer cutter disc lifeBEARINGSCarburized and case-hardened, uses Timken tapered roller bearings that outperform other bearings in dynamically loaded conditions and harsh environments. During assembly, the bearings are pre-loaded to effectively excavate hard rock in the most severe operating conditions.SEALSDurable metal-to-metal face seals eliminate ingress of foreign materials while silicone torics maintain elasticity even at high temperatures.RETAINERThe patented compensation retainer has a superior piston design with a much larger surface area than other cutter manufacturers. The outer surfaces are carburized and case-hardened for extended life in harsh conditions.HUBMade of durable alloy steel, hubs are furnace heat-treated, quenched, and tempered for toughness. The disc-mounting surface is further induction hardened and finished by grinding.SHAFTshafts are made of the same alloy steel as the hubs, and go through an identical process of heat-treatment, quenching, and tempering. They are additionally gas nitride for surface hardness
Greetings from Vietnam Have you ever been purchasing CORN COB MEAL for producing ANIMAL FEED or Mushroom cultivation??? We are KIM MINH EXIM CO., LTD specialized in producing and supplying CORN COB MEAL besides CORN SILAGE, SUGAR CANE BAGASSE, TAPIOCA RESIDUE, BREWER DRIED POWDER could be used as material for fertilizer/compost and for animals feed. CORN COB MEAL Size: 1mm - 6mm Moisture: 14% Max Metal Cleaning , Pet litter and Medium for mushroom and so on 1. Polishing: can be used to wipe, dry grinding, metal or plastic, glass and other products. 2.adsorbability, adsorption at four times its weight of the liquid, is a great development of activated carbon resources.It is used for the wet water sports venue absorption, drying, and chemical waste absorption, a large area of water surface greasy dirt cleaning. 3.The non-toxic for feed industry: vitamin, condiment carrier. 4.Chemical stability: it is a kind of good medicine, chemical carrier. 5.Corncob as animal feed. Packing: 35kgs- 40kg/ PP bag Or 600kgs/ Jumbo bag Stuffing: 24Mt/ cont 40'HQ We assure that we can supply products in large quantity, high quality with a very competitive price. For more informations or orders, please do not hesitate to contact with us. I am looking forward to hearing from you soon. Phan Huynh Tel: +84787451711 Skype: PhanHuynh.KME Whatsapp/Mobile: +84787451711 Email: thanhquy(at)kimminhexim(dot)com GOOD DAY TO YOU! Thanks and Best Regards. logo 1.jpg KIM MINH EXIM CO., LTD Address: 43 Mac Dinh Chi, Dakao Ward, Dist , Ho chi minh City.
Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials. Application The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints: Used to caulk at concrete, building, and bridge. Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects. Used as the joints of precast concrete, and the seams of the glass and construction. Used in the seaming of metal siding, and the bonding of aluminum window frame. Using method Add component B and pigment into component A; Stir quickly up and down until it is well mixed; Wipe the mixed sealant in the site where is waiting for construction with a small shovel; Don´t soak and contact with water within 48 hours after construction. Note Component B should be fully added into component A, which will affect the curing time and plasticity; The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing; The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion; Notice to avoid water and rain within 48 hours after construction.
Low Zinc active nano zinc oxide masterbatch European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance. Activator Topfine® CR510 is prepared by means of liquid phase reaction, which is obtained by reaction under specific temperature and PH conditions, also obtained under dehydration process and granulation technology. PRODUCT HIGHLIGHTS High activation efficiency Nanometer grade dispersion, no agglomeration Good dispersity of processing, no dust Excellent physical properties (comparing with equivalent ZnO indirect Process), can replace ZnO-80 Masterbatch equivalently) Environmentally friendly, Zinc content 40% Effectively increase the scorching time, improve the processing safety, the vulcanization speed faster than that of the common zinc oxide. Low content of heavy metal, passed SGS test, meet RoHS standard CR510 Pre-Dispersed Polymer Bound Chemicals function Metal Oxide A homogeneous mixture of Zinc Oxide and polymeric binder system at 80/20 ratio The elastomer bound form of CR510 ensure better physical properties and surface quality for extrusion profiles than powder form.The vulcanizates will obtain higher modulus and tensile strength,prevents scorch in chloroprene rubber compounds . Dosage 3 - 8 Phr Packaging 25 kgs in carton box with polyethylene bag liner or Valve pocket Storage Keep cool (below 25 ) and dry in original package.24 months from production date characteristic It can replace ZNO80 very well with low zinc , ECO-friendly.
PRODUCT HIGHLIGHTS High activation efficiency Nanometer grade dispersion, no agglomeration Good dispersity of processing, no dust Excellent physical properties (comparing with equivalent ZnO indirect Process), can replace ZnO-80 Masterbatch equivalently) Environmentally friendly, Zinc content 40% Effectively increase the scorching time, improve the processing safety, the vulcanization speed faster than that of the common zinc oxide. Low content of heavy metal, passed SGS test, meet RoHS standard European Commission has confirmed the EU-wide ban on the use of zinc oxide at medicinal levels in piglet feed in 2017, EU 2017/1413 Regulation made further limit on zinc oxide in cosmetics, in 2016, California Senate Bill 1260 even tried to ban the sale of motor vehicle tires in California that contained more than a certain amount of zinc by weight. To follow this tread, we have developed Low-Zinc Activator Topfine® CR510, it has the characteristics of low zinc content, high vulcanization activity and excellent dispersion. Zinc content is only half of common Zinc Oxide (ZnO), which is environmentally friendly, and meets the requirements of rubber products performance. Activator Topfine® CR510 is prepared by means of liquid phase reaction, which is obtained by reaction under specific temperature and PH conditions, also obtained under dehydration process and granulation technology. CR510 Pre-Dispersed Polymer Bound Chemicals function Metal Oxide A homogeneous mixture of Zinc Oxide and polymeric binder system at 80/20 ratio The elastomer bound form of CR510 ensure better physical properties and surface quality for extrusion profiles than powder form.The vulcanizates will obtain higher modulus and tensile strength,prevents scorch in chloroprene rubber compounds . Dosage 3 - 8 Phr Packaging 25 kgs in carton box with polyethylene bag liner or Valve pocket Storage Keep cool (below 25) and dry in original package.24 months from production date characteristic It can replace ZNO80 very well with low zinc , ECO-friendly.
Lsaw steel pipe (longitudinal double submerge arc welding steel pipe/dsaw steel pipe) is one kind of the saw pipes, it is made of steel plates of hot rolled by jcoe or uoe forming technology. Our company usually produce the pipes by jcoe technology, the jcoe means the forming process, as j shape firstly, then c shape, and then o forming, e forming process at last, while inner & outside welding and cold expansion after welding. Compared with uoe lsaw pipes, our productive line could produce more sizes, od406mm-1620mm, pipe length: 2m-18m, the thcikness from 6.35mm-60mm and our lsaw pipes has its superiority: Longitudinal double submerge arc welding steel pipe(lsaw steel pipe) is made of steel plates of hot rolled by jcoe and uoe. Jcoe means the forming process, as j shape, c shape, o forming, inner&outside welding and cold expansion after welding. It only has one straight seam on the pipe body. 1. Feature: large diameter, thick wall, high pressure&low temperature resistance 2. Test: chemical component analysis, mechanical properties (ultimate tensile strength, yield strength, elongation), technical properties (flattening test, blow test, impact test, dwt test), exterior size inspection, hydrostatic test, x-ray test, ut test. 3.Application:the bas e metal and weld metal were tested according to the pipe specification api spec 5l psl1, widely used for liquid delivery, such as oil, gas, water and seashore, ground constructions.