En590 10 ppm diesel.
En590 10 Ppm Diesel.
En590 10 ppm diesel.
En590 10 ppm diesel.
En590 10 Ppm Diesel.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
Diesel ULSD EN590 10 PPM. Contact for procedures and quotes. Locations: Rotterdam and Fujarah. Scammers stay away!
The need for EN590 is on the rise. We can supply on a variety of terms - CIF, TTT, TTV and more. EVERYBODY wants to buy TTV in Fujairah, and we can deliver there; but the costs of doing business there are out of sight. Particularly for Traders, doing a TTV deal there and then shipping it to another location. But we can do the same shipments to Jurong, Rotterdam and Houston. If you are looking for CIF discharge, we can do that, as well. Contact us and tell us your specific need and let us see about putting a transaction together that meets your exact need. Send us an LOI and let's do some business, now! Before prices rise again!!!
Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil. The "10 PPM" designation refers to the maximum allowable sulfur content in the fuel, which is 10 parts per million (ppm) or less. Here are some of the specifications for Diesel EN590 10 PPM: - Density at 15 C: 820-845 kg/m - Flash point: minimum 55 C - Cetane number: minimum 51 - Sulfur content: maximum 10 ppm - Distillation range: 90% distilled at 360-370 C - Cold filter plugging point: maximum -5 C - Appearance: Clear and bright, free from visible sediment and water Diesel EN590 10 PPM is primarily used as a fuel for diesel engines in automobiles, trucks, buses, and other vehicles. It is designed to meet the stringent emissions standards in Europe and other regions, which require lower levels of sulfur and other pollutants in diesel fuel. The use of low-sulfur diesel fuels like EN590 10 PPM can help to reduce air pollution and improve air quality, as well as reduce the emissions of greenhouse gases.
Diesel 10 Ppm
Diesel en590 10 ppm, a1 jet fuel, various petroleum products.
Ultra-Clean Diesel EN590 10PPM - Engineered for Environmental Excellence! Experience the future of diesel with our EN590 10PPM, a premium fuel designed with low sulfur content to minimize emissions and protect the environment. Ideal for modern engines, it enhances performance while significantly reducing your carbon footprint. Drive clean, drive smart. Diesel EN590 Ghost - The Invisible Shield for Your Engine! Our Diesel EN590 Ghost variant stands as a testament to innovation, offering superior protection and efficiency for your engine. With advanced formulation to combat wear and tear, it ensures your engine runs smoother, longer. Embrace the ghostly power that keeps you moving forward.
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
DIESEL EN590 Minimum Quantity: 5000 metric tons CIF price: GROSS USD $420.00 MT NET: USD $410.00 MT TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Commodity: Jet Fuel A1 Origin: Non-Sanctioned Quantity: 4 Million Barrels Price: 84 USD Gross Commodity: En 590 10 PPM Origin: Non-Sanctioned Quantity: 200.000 MT Price: 560 USD Gross VOPAK TO VOPAK PROCEDURE 1. Buyer Sends CIS with the purchasing product to Seller through Seller's Mandate for verification: 2. Seller Company assigned Vopak Botlek Europoort Terminal Manager to buyer. 3. Buyer finalize the Vopak Botlek Europoort protocals through the Vopak Botlek Europoort Terminal Manager, obtain the following and submit the same to seller company as listed below. * Vopak Botlek Europoort Barcode - Vopak Botlek Europoort Registration information. * Exact name and reference of their Vopak Botlek Europoort account. �¢?? 3b. Format of Authorization Form to accompany the information. LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of tanks at Royal Vopak Rotterdam, with contract reference number: _____________. 4. Seller Company sends Cl for Buyer's endorsement. Buyer sign the CI and return back within 24 hours of receiving alongside side with Vopak Botlek Europoort Barcode and Sign Letter of Authorization. 5. Seller Company gives Buyer Full POP documents along with fresh SGS (less than 48 hours onetime official confirmation mail from SGS official). * Fresh SGS Report or Saybolt (Not later than 24 - 72 hours) * Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. * Injection Report Agreement * Authorization to Sell * Authorization to verify the product in the tank (ATV) * Country Certificate of Origin * Approved Dip Test Authorization (DTA * Availability of Product, * Commitment to Supply, 6. After verification of full POP by buyer, injection begins. 7. Upon completing the Injection, seller Company transfers title to buyer. 8. Buyer makes full payment after via MT103, seller Company pay commission to the intermediaries
We are the largest distributor of diesel , we guarantee low price on our diesel product contact us for the price
Product list : 54 (jp54) . jet a1, diesel fuel en590 (ulsd 10 ppm) 50 ppm, d6 fuel oil. diesel gas d2 oil lng. lpg, light cycle oil (lco), gasoline 72,76,91,93,95 . pet coke, automotive gas oil (ago). tar oil mazut m100 . blend crude oil, condensate gas, hydrocarbon gas . urea 46% prilled & granular, bitumen grades: 40/50, 60/70 & 80/100 road bitumen, roofing bitumen, construction bitumen .bituminous emulsion, polymeric bituminous binder, bituminous binders according to pg.
Rigwise Standard Cif Procedure DIP & PAY SINGAPORE, FUJAIRAH, ROTTERDAM and HOUSTON 1. BUYER issues LOI with full company KYC including: Company Details, Contact Details for Signing Authority, and Passport Facing Page. 2. SELLER issues Soft Corporate Offer (SCO) including: Full Company Details, Contact Details for Signing Authority, Passport Facing Page, and Company Banking Details. 3. Upon Acceptance of SELLER'S SCO/FCO, BUYER issues Irrevocable Corporate Purchase Order ICPO with complete Banking References, Company Profile (CP), Company Registration, Copy of Buyer's Authorized Signatory's Passport and RWA Letter signed by two of buyer's bank officers and issued to seller's name, which stipulates that Buyer is RWA to issue financial instrument (DLC) for payment of goods ordered. 4. On receipt of BUYER'S ICPO and RWA Letter, seller issues (amendable) draft contract (SPA) and NCNDA/IMFPA completed by Seller's Mandate/Broker. 5. BUYER returns to SELLER the signed and sealed SPA along with the IMFPA/NCNDA completed and signed by BUYER, BUYER'S Facilitator/Buyer Mandate Group and all Intermediaries. 6. SELLER issues approved, countersigned and sealed SPA which now incorporates the NCNDA/IMFPA as an Annexure within the SPA document. Both BUYER and SELLER lodge the Legalized SPA contracts in their respective Banks. 7. SELLER issues PPOP, . 8. BUYER Verifies PPOP and is satisfied with the outcome, issues and activates an inoperative, transferable/Non-Transferable DLC as a guarantee instrument. (CHOICE IS BUYERS) 9. SELLER provides FULL PROOF OF PRODUCT, 10. Ship arrives at the destination port and a Q&Q inspection is conducted by a nominated inspection agency such as SGS or equivalent others on the goods and checks through the Bill Of Lading (BL) and Commercial Invoice. Upon Satisfactory Inspection Report, the Buyer Releases Payment via MT103/TT to SELLER'S Bank (100% Payable for Each Shipment) within 3 banking days. 11. Documents from shipping on board Vessel. (To Be Issued after Loading) 12. After Confirmation of Receipt of Payment to SELLER and INTERMEDIARIES (Commissions as per IMFPA) the Seller shall instruct the Ship's Captain to discharge the Cargo. 13. SELLER sends the Title Ownership documents to BUYER.