RTV Silicone Adhesive Sealant is a general purpose, clear RTV indoor/outdoor sealant that seals, bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops. It can be applied to horizontal or vertical surfaces. Permatex Clear RTV Silicone Adhesive Sealant is waterproof and flexible. Features 1. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops; 2. Waterproof, durable, and flexible; 3. General purpose, clear RTV indoor/outdoor sealant; 4. Resists water, weather, and vibration 5. Temperature Range: -75F to 400F (-59C to 204C)
Liquid silicone rubber nipple We are one of the leading organization engaged in trading, exporting and supplying excellent quality liquid silicone rubber nipple in mumbai, maharashtra, india, which are manufactured by using high grade material. These liquid silicone rubber nipple are widely appreciated by our clients which are situated all round the nation. High in demand, these liquid silicone rubber nipple are available at most reasonable prices. Manufacturer in silvassa | daman | vadodara | dubai | bahrain | mumbai | india Chemco | packaging made prefect | chemcogroup.Com
Made of 100% silicone Resistant to temperatures between -40 ¦C to 240¦ C.
1.Product Description YJS-720 two components platinum cured silicone with 1:1 mixing ratio by weight. It is soft food grade silicone, with 20 Shore A hardness, which is suitable used for moulding chocolate & icing sugar, candy, cakes, fondant. 2.Features: A. Amazing fluidity and easy to operate A. Platinum-based, food-grade silicone (environmental friendly, odorless and non-toxic) B. Delicate design available C. Mixing ration: 1:1, easy to mix D. Easy de-molding E. Excellent tension and tear strength F. High performance in duplication G. Shrinkage is almost zero (below 0.1) H. Excellent resistance to weather, temperature, aging, acid and aging-proofing. I. High resistance to high temperature and aging(resist -60 to 250) J. Food safe 3.Technical Data Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-720 Hardness Shore A 20±2 Mix Ratio A:B 1:1/10:1 Color / translucent Pot life 25 °C (77F) 30-40mins Curing time 25 °C (77F) 3-4 hours Mixed viscosity mPa.s 5000±1000 Tear-strength kg/cm 20±2 Tensile-strength M.pa 4.0±1.0 Elongation % 500±50 Shrinkage % â?¤0.1% 4.Appearance: Part A: a non-toxic and odorless liquid with translucent color and platinum inside Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Notice: What is the hardness should I choose Normally 5~55 Shore A will be the best, but it also should according to your size and pattern design. 5.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months. 6.Package 1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
1. Application of liquid silicon rubber for toe spreaders: The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.Q This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care. 2. Aadvantages of liquid silicon rubber for toe spreaders: 1. High transparency. 2. High fluidity, high curing rate. 3. Pressure release. 4. Shock absorption. 5. Multiple density 3. Datasheet of liquid silicon rubber for toe spreaders: Model Q625# Q630# Appearance Transparent Transparent Mixing Ratio 1:1 1:1 Operating time (Mins 25¡ãC) 30 -50 30 -50 Curing time (H 25¡ãC) 3 - 5 3 - 5 Curing time (Mins 60¡ãC) 20 - 30 20 - 30 Hardness (A¡ã) 25¡¨¤2 30¡¨¤2 Density ( g/cm 3 ) 1.08 1.08 Viscosity (CS) (After mixed) 8000 ¡¨¤ 500 8500 ¡¨¤ 500 Tensile-strength( kgf /cm2 ) 45 ¡¨¤ 5 45 ¡¨¤ 5 Tear-strength (kgf /cm2 ) 14 ¡¨¤ 2 17 ¡¨¤ 2 Elongation-break(%) 450 ¡¨¤ 50 400 ¡¨¤ 50 Retractility(%) ¡¨¹0.1 ¡¨¹0.1 4. Package and storage of liquid silicon for Toe Spreaders: 1). 20kg or 200kg /drum. 2). It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain. Place of Origin: Guangdong China Brand Name: Hong Ye silicone rubber Minimum Order Quantity: 200 Kilogram Delivery Time: within 3 days after payment confirmed in our bank. Supply Ability: 8 Tons per Day Payment Terms: L/C, T/T, Western Union Price Terms: FOB, EXW, CIF, CNF Packaging Detail: 1kg/Jar,5kgs/Jar,20kg/drum,25kgs/drum,200kgs/drum Further information for silicon Toe Spreaders, please feel free to contact Miss COCO: Website: http://www.szrl.net Tel: +86 -0755-89948294 FAX: +86-0755-89948030 5kg/pail; 20kg/pail; 25kg/pail; 200kg/pail
This series is high strength silicon rubber suitable for cable, wire , tubes, kitchenware , mp3 skin and so on . Type:gfd2031\2041\2051\2061\2071\2081 Features : Excellent process ability , High tensile strength , Rohs, reach , Fda & flgb grade . Applications: Kitchenware, bakeware , Skin cover for mobile devices, Tubes, sealings , Parts . Cure condition : c-15 (2.0%), 170?×10mins; Storage: store in a cool and dry place out of direct sunlight; Package: 20kg/carton.
INTRODUCTION: The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes. FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Pad printing silicone rubber is rtv2 silicone, also called two components silicone or two parts silicone, part A and B will vulcanize in room temperature when A and B mixed. The mix ratio of tin cure silicone is 100:3, the platinum cure silicone is 9:1.
Description of translucent silicone rubber for shoe insoles translucent silicone rubber for shoe insoles is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles. translucent silicone rubber for shoe insoles is specially developed for insoles. It can also be used for lace coating and Conveyor belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required. Specification of translucent silicone rubber for shoe insoles ·Convenient 1:1 mixing ·Free of solvents ·Pourable ·Good self leveling characteristics ·No release products ·Fast cure at elevated temperatures
Description of Liquid Silicone Rubber for Pad Printing Liquid Silicone Rubber for Pad Printing Mainly used for making plastic toys, electroplating products, electronic toys, trademarks, communications equipment, gifts, stationery and other irregular pattern. Pad printing is the pattern on the plate carrier made by plastic head, then transfer the pattern on the plate on the toy products, Pad printing silica gel demand quality exquisite, no impurities, rebounwell, apply oil well, a clear printing pattern Feature of liquid silicone rubber for pad printing 1, Oil fell oil effect is good 2, Exquisite, good resilience, printing more often, no impurities, no particles 3, Printing clear pattern 4, Low viscosity, good fluidity 5, No shrinkage, easy apply oiling , clear printing pattern Precautions of liquid silicone rubber for pad printing No mixing with acid-base materials, alkoxy silane or high temperature water vapor, otherwise there is the tendency of curing and viscosity changes. [ Sample ] We can send 1kg sample for free ,but the shipment charge usually paid by your side [ Rapid response to your needs ] We will be answer within 24hours. Welcome to contact with us if you have any problems.
INTRODUCTION: This is a kind of room temperature vulcanized silicone rubber in condensation type. It's generally named as two part silicone rubber, Part A is a flowable liquid, part B is the curing agent or catalyst. It's mainly used for mold making. This Silicone rubber is with good fluidity and moderate hardness which is suitable for middle size product with pattern by pouring operation, especially popular for manufacturer of resin crafts and gypsum decoration. Besides, additive is available for brushing operation. It's one of our best selling silicone! PRODUCT FEATURES: *An exceptional fluidity and good operability, easy to demold *Moderate hardness *High tensile and tear strength *Good flexibility *Cure at room temperature *Outstanding bubble releasing *High duplication times OPERATION INSTRUCTIONS OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS: Step 1: prepare the original molds Step 2: Take 100G parts A and add 3G parts B and mix them evenly. Step 3: Vacuum pumping Step 4: Pouring casting or Brush operation (For the detail of operation instructions,please contact us) SHELF LIFE : Twelve(12) months when stored under dry and cool place by original package under 25 Centigrade. APPLICATION: This silicone rubber is used for making molds of concrete stone,GRC, gypsum decoration, plaster ornaments, fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle, and similar products . ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
1.Description of liquid silicone rubber C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability. C-830 tin cure mold silicone has a good property , it is suitable for various mold making . 2.Characteristics of liquid silicone rubber *An exceptional fluidity and good operability, easy to demold *Good tensile strength and tear strength *lower shrinkage *non-deformation ,non-oily *good flexibility *eco-friendly *long shelf-time &lifetime 3.Application of liquid silicone rubber stone mold ,concrete mold , cement casting mold polyurethane casting mold , GRC casting mold , fiberglass cating mold statue mold , sculpture mold , resin craft mold ,artificial wooden mold gypsum mold , plaster mold ,bronze casting mold candle mold ,soap mold, shoe mold , tyre mold ,etc ..... C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern. Package: 1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum based on vacuum packing. Shelf life and transportation 1. Twelve(12) months when stored at 25C in tightly closed original packages. 2. This kind of product is non-dangerous product, which could be transported as general chemicals.
1. Description of food grade liquid silicone rubber for making mould Addition-curing, Food grade, Translucent, Two-component mold making silicone. 2. Characteristics of food grade liquid silicone rubber for making mould Acceptable for food contact Outstanding release properties Low viscosity Easy mixing and degassing High flowability Odorless and Nontoxic Enhanced durability 3. Application of food grade liquid silicone rubber for making mould Food Grade Related Applications Cake mold Chocolate moldmaking Candy moldmaking Baking moldmaking Ice trays molding Casting butters Casting for Kitchen products 5. Using instructions of food grade liquid silicone rubber for making mould Step 1: Prepare and clean the prototype. You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way. Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone : catalyst= 100:2), mix the silicone rubber and catalyst evenly. Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber. Step 3: Vacuum pumping. After mixed the silicone evenly, it is better to release the bubble by vacuum pumping. Step 4: Pouring cast or brushing cast. After released the bubble, we can pour/brush the silicone rubber on the prototype. Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time. Packaging & Shipping Packing: 20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B 25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B 200KG/drum packing for part A +200KG/drum packing for part B
1. Description of rtv 2 liquid silicone rubber for frame gypsum molds C830 silicone rubber is condensation cure silicone rubber (tin cure silicone rubber) for mold making. The silicone rubber will be cured under room temperature. It's two components, the mixing ratio is 100:2. Part A is a flowable liquid silicone, part B is the catalyst. It has an exceptional fluidity and good operability. 2. Characteristics of rtv 2 liquid silicone rubber for frame gypsum molds * An exceptional fluidity and good operability, easy to demold * Good tensile strength and tear strength * Suitable hardness * Copy detailed pattern * Good flexibility * Eco-friendly * Long shelf-time &lifetime 3. Application of rtv 2 liquid silicone rubber for frame gypsum mold C830 liquid silicone rubber is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations, plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. etc. C830 liquid silicone rubber is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation. Package 1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum. Shelf life and transportation 1. Twelve(12) months when stored at 25C in tightly closed original packages. 2. This kind of product is non-dangerous product, which could be transported as general chemicals.
The product is suitable for control loop, signal protection and measuring circuitry with rated voltage up to 0.6/1kv which works below 180celsius degree. It is widely used in a-energy industry, automatic control units, home appliances, coal mine, power plant and heating units etc. Feature: 1, excellent plasticity and small bend radius locations 2, good performance in heatproof and cold resistant abilities when working temperature between -60celsius and 180celsius. 3, good performance in mildew resistance, percentage of water that sop up below 0.015% 4, excellent capacity of ozone aging resistance, ultraviolet radiation aging resistance and atmosphere aging resistance 5, cable with shield is lightning-proof, electromagnetism resistant and can poise the power 6, you should connect the ends of the shield to the earth when you are installing the cable with shield. Make sure that do not break and loosen the shield, otherwise the capacity of the shield will reduce very heavily.
Mainly used for water-proof, moisture proof and sealing elements in the area of electronics, high temperature electrical wire and cable, and aviation and so on. It can be used to manufacture various kinds of silicone products, such as sealing components, sealing ring, keypads, molds, etc.
100:2 two-component liquid silicone rubber belongs to condensation type mold silicone rubber. When part A and B are mixed in 100:2 weight, the crosslinking reaction can occur, and the elastic body with certain hardness is formed after curing. It has many advantages, such as good fluidity, easy to operate with low viscosity. After curing, it has heat resistance, high temperature resistance, corrosion resistance, solvent resistance, high tensile and tear strength, low linear shrinkage, high turning model times. It is a cast of gypsum, cement, POLY-RESIN, PU, AB water, ABS material of the elastic mold material, it is widely used in the production and reproduction of sludge, toys, gifts, reliefs, statues, city sculpture, cement products, hand plate, car model, model of home appliances, mold products such as soap.
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds Artificial Stone & Concrete Casting Silicone Rubber Features: Amazing fluidity and easy to operate Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic) Delicate design available Mixing ration: 1:1, easy to mix Easy de-molding Excellent tension and tear strength High performance in duplication Shrinkage is almost zero (below 0.1) Excellent resistance to weather, temperature, aging, acid and aging-proofing. High resistance to high temperature and aging(resist -60â?? to 250â??) Appearance: Part A:a non-toxic and odorless liquid with translucent color and platinum inside. Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Technical Data Characteristics of the non cured product Properties G-820 G-825 G-830 G-835 G-840 A B A B A B A B A B Appearance low viscous liquid Colour translucent Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10 Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000 Polymerisation Curing conditions: 1h at 80 �°C Properties G-820 G-825 G-830 G-835 G-840 Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2 Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10 Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50 Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2 Application: GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc. Operation Method: Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing. Notice What is the hardness should I choose? Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design. Warm Tips: The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry. Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing. Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices). Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include: -Natural or synthetic rubber, vulcanized with sulphur derivatives. -Poly-condensation RTV catalyzed with metallic salts. -PVC stabilizing agents. -Amine cured epoxies. -Sulphur, tin and amines derivatives. -In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Description of platinum curing mould making liquid silicone rubber Addition cure silicone is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making. Application of platinum curing mould making liquid silicone rubber Silicone rubber is mainly used for making molds of tire, concrete stone, grc, polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products.
1.Unsaturated polyester resin, epoxy resins, polyurethane resins 2.Polyurethane elastomers 3.Natural and synthetic waxes 4.Plasters and cements Features of silicone rubber 1.Curing agent arrange together as free charged. 2.In liquid form and in various colors 3.With and exceptional fluidity and good operability 4.Temperature and deformation resistance as well as low shrinkage 5.High duplication times6.Samples orders are available 7.Moq:200kg Silicone rubber are generally named: Two-component room temperature vulcanization silicone rubber , a kind of elastic silicone rubber mold which features with resistance to deformation.High-temperature, acid-alkali and expansion, it mainly applicable to make the silicone mould for cultural relic duplication , architectural decoration, resin crafts , lighting ornaments , candles , statues mold design, product exploitation etc. Instruction for using silicone rubber for mold making to make molds. Step 1:preparing mold. Once you have your model to mould you need to build a box from wood/acrylic to contain the silicone and get a good covering over your model , the size and shape of this container is totally depends on shape of the model , remembering to leave plenty room surrounding the model so that you will have a strong wall thickness (at least 20mm) Note:small models can be cast in sourced containers like tins , ice buckets , cake tins, etc
