Cisco original modules wan interface card and switch.
Extra interface boards, 8086 microprocessor, breadboard module.
Surge absorber, capacitor, voltage suppressor interface module.
Product Description Probe Mechanical& Electronical Specification Pitch 1.00mm[ 0.039in] Working Stroke 4.25mm[ 0.167in] Full Stroke 6.35mm[ 0.250in] Spring Force 1N 1.5N Resistance Max.50mOhm Current 3Amp Operated Temperature -40~125�°C Drilling Hole Size 0.780-0.805mm [.0307-.0317in] Probe Material and Treatment Plunger SK4 or BeCu/ Au Plated Spring Music Wire/ Au Plated Tube Bronze/ Au Plated
39mil short test probe and receptacles Probe Mechanical& Electronical Specification Pitch 1.00mm[ 0.039in] Working Stroke 2.71mm[ 0.107in] Full Stroke 4.50mm[ 0.177in] Spring Force 1N 1.5N Resistance Max.50mOhm Current 3Amp Operated Temperature -40~125�°C Drilling Hole Size 0.780-0.805mm [.0307-.0317in] Probe Material& Treatment Plunger SK4 or BeCu/ Au Plated Spring Music Wire/ Au Plated Tube Bronze/ Au Plated
Chipset:rtl8821as Wifi standard:compatible with ieee 802.11b/g/n standard Encrypted:support 64/128/152bit wep and wpa encrypted data, wpa2-psk wpa, wpa2 / wpa2 wpa2-psk Interface:sdio interface, built-in wireless roaming (roaming) technology Working mode:provide centralized control (infrastructure) and equation (ad hoc) working mode Transmission rate:11b: 1/2/5.5/11mbps(dynamic) , 11g: 6/9/12/18/24/36/48/54mbps(dynamic) , 11n: the highest data rate can reach to 300mbps Range :transmission distance indoors as far as 50 meters as far as 150 meters (environmental factors influence) outdoor 100-200m ( theoretical value) Frequency:working double frequency 2.4 ~ 5.8 ghz Consumption:ultra-low power consumption, 3.3vdc operating voltage Antenna :external antenna Operation system :supports windows 2000 / xp/vista/windows 7 / win ce/linux/mac os/android operating system Certification :comply rohs, reach ce, fcc approved Other:1t1r, wifi+bt Size (mm):20x14x1.6
1. Miniaturized module (67.6x36.7 mm2) with high performance and supreme graphics 2. Based on nvidia tegra 3 soc, quad core arm cortex™-a9 running up to 1.4 ghz 3. Multimedia support – integrated graphics controller, 3d acc., hdmi, vga, dual display controller, cpi, video decoder; connectivity interfaces – usb, i2c, spi, uart, ethernet, external bus, sd/mmc 4. Member of extensive colibri pin-compatible family; passive cooling support 5. Supported os - windows embedded compact and linux
1. Miniaturized module (67.6x36.7 mm2) with optimal performance and low power consumption 2. Based on nvidia tegra 2 soc, dual core arm cortex™-a9 running at 1 ghz 3. Multimedia support – integrated graphics controller, 3d acc., hdmi, vga, dual display controller, cpi, video decoder; connectivity interfaces – usb, i2c, spi, uart, ethernet, external bus, sd/mmc 4. Member of extensive pin-compatible colibri family; industrial temperature compliant; passive cooling support 5. Supported os - windows embedded compact and linux
1. Miniaturized module (67.6x36.7 mm2) suitable for extensive application areas 2. Based on freescale imx6 soc, dual/ single core arm cortex™-a9 running up to 996 mhz 3. Multimedia support – integrated graphics controller, 3d acc., hdmi, cpi, video decoder, resistive touch; connectivity interfaces - usb, i2c, spi, uart, ethernet, external bus, sd/mmc, can, analog inputs 4. Member of extensive colibri pin-compatible family; passive cooling support; industrial temperature variants; availability till 2028 5. Supported os - windows embedded compact and linux
1. Miniaturized module (67.6x36.7 mm2) with unparalleled cost-performance trade-off; very low power consumption(0.5 - 0.8 w) 2. Based on freescale vf5xx, single core arm cortex™-a5 running at 400 mhz 3. Multimedia support – display controller, integrated graphics controller, 2d acc., cpi, rgb; connectivity interfaces - usb, i2c, spi, uart, can, sd/mmc, ethernet, analog inputs 4. Member of extensive pin-compatible colibri family; industrial temperature compliant; availability till 2028; starting price of 26 usd; passive cooling support 5. Supported os - windows ce/ embedded compact, linux
Human Interface Module 20-HIM-A6 turbine parts YOYIK produced by the development of agents. I plant production of various types of accessories up to tens of thousands of varieties, commodity varieties have been widely covered in the power plant hydrogen oil and water systems, roof pump system, regeneration system equipment, anti-fuel system, recycling system, sealed oil system, stator cooling water system, Purification equipment and other important system. Mainly used in power plants, steel mills, cement plants, chemical plants, shipyards and many other areas of industrial areas, but also to promote high-quality products, establish a brand image to lay a good foundation. Yoyik can offer many spare parts for power plants as below: #DF-Human Interface Module 20-HIM-A6 turbine parts-DF Eddy Current Sensor PR6424/001-110 ac lvdt ZDET-50A Sensor DF312580-50-09-00 LINEAR VARIABLE DIFFERENTIAL TRANSFORMER DET800B Speed sensor ZS-04-075-3000 Contactor LC1N1201CC5N 36V Power supply module 857833 LVDT Sensor TDZ-1E-12B Load cell AC19387-1 absolute linear position sensor DET250A LVDT Sensor TDG1000 Power unit FDPC200-A Pressure Switch PS531SPP10/BB32N3/S3F thermal resistance WZPK2-233-G1 LVDT Sensor HY-3-100-15-D Voltage Meter HCD194U-9D1 linear sensors position HL-6-250-150 PRESSURE SWITCH BH-013047-013 Thermohygrograph Monitor L2W2K-Z3A(TH) Braun Card D521.02 speed sensor SZCB-01 L=110 Digital display MB3051 outside air static pressure pickup SMCB-01-16 Sacrificial anode flange SR-107V Wheel Blade Opening Control LYK-11-1015 High Speed Bus Power Transfer System MFC2000-3A Speed sensor CS-1G-G-060-02-01 dp differential pressure 3051CD4A22A1AM5B4DF LVDT sensor 4000td-xc3 Digital display device MSC-02B Pro Actuator AOX-080 Proximity switch E2E-X7D2-N-Z Termocouple TC03A2-KY-2B/S13 turck linear transducer TDZ-1-50 Eddy Current Sensor PR6422/102-020 Push button ZB4BZ101 + ZB4BA4 Human Interface Module 20-HIM-A6 turbine parts Human Interface Module 20-HIM-A6 turbine parts MY-DFYL-2024-6-6
Electronic components, active, passive, wireless/GPRS module.Trading
Overview Ds¡§cgmt series are gigabit ethernet cmos industrial cameras with external trigger function, adopt rj45 network interface. Image data transmission distance and speed can reach 100m@1gbps in single cable, and this series can be compatible with mb network. With built-in image buffer and image processing module (isp) ds¡§cgmt series support 16 cameras stable working simultaneously. This series cameras support twain and directshow interface standards, fully compatible with windows xp (32-bit), win 7 (32/64) and win 8 (32/64) operating systems. ce is used hirose 12 pin connector, stable and reliable 4.Unique dustproof rubber base ensure sensor surface be clean 5.Use do3think self research & developing basedcam software platform. Dimension: 75mm x 50mm x 30mm ¡§exclude lens mount Weight: approx. 170g
1.[Supply]: We provide IC Supply Chain and any others forms of cooperation, including samples minimum to 1 piece (you can talk with your retail sales) and long-term supply. 2.[Quality Guarantee]: We provide only new and original parts. Before each shipment, our warehouse will examined the products carefully to ensure the goods you received are in ideal state of perfect quality and accurate quantity. 3.[Payment]: We accept payment by T/T, Bank transfer, Western Union, Escrow and PayPal. 4.[Fast delivery]: We will arrange shipment within 1-2 working days after confirming buyer's payment. If urgent, we will arrange the shipment on the very day. You can tell your sales if you have any special needs. 5.[Shipment]: If you don't have an account with any courier, we can help you to prepare the transport on our side and prepay the shipping cost here. We can ship our parts by DHL, UPS, FedEx, TNT and etc. to most places of the world. If you prefer any other shipping ways, please tell us and we'll check if it is available. We will ensure the lowest shipment cost. 6.[Tracking]: Your sales will provide the tracking number once our warehouse sends your parts out. Please confirm the receipt of the products if you received the Parcel, and if the goods have any damage, please contact us immediately, and we will send you the replacement at once. 7.[Refund & Replacement]: If some of the items you received aren't of perfect performance by unexpected reasons, we would still responsibly arrange your refund or replacement. But the items must remain their original condition. 8.[Domestic Cooperation]: We can be your native partner in China with our one-stop supply capacity. If you're in China, you're welcome to give us an investigation. 9.[Others]: If you have any other question, please confirm with your sales.
IC CPLD 1.6K 72MCELL 64-VQFP - XC9572XL-10VQG64C - Xilinx Inc Integrated Circuits (ICs) Programmable Type In System Programmable (min 10K program/erase cycles).
204 * 120 * 34mm (without/with mounting holes and interfaces) ¡ñ weight: 400g. ¡ñ working temperature: -40oc ~+70oc ¡ñ storage temperature£º-40~+80oc ¡ñ relative humidity£º95%(no condensation) ¡ñ magnetic compatibility: electrostatic discharge immunity test level: 3 ¡ñ radio frequency electromagnetic radiation: immunity test grade: 3 Standard packing
Global tech gt-pcm-c series pcm multiplexer chassis can take 64k bps timeslot as granularity, construct n* 64k bit nd approximate 50w maximum power consumption. * varied service types and port quantities are configurable flexibly in chassis. * ¡ö rx range: ¡ü 27db ¡ö transmission distance Multi mode fiber: 5km Single mode fiber: 20/60/120km ¡ö jitter feature: comply with g.742 and g.832 ¡ñ ethernet interface ¡ö 10m/ 100m auto negotiation ¡ö full/ half auto negotiation ¡ö related standard: iee802.3, iee802.1q (vlan) ¡ö connector: rj45 ¡ö mdi/ mdix auto negotiation ¡ö mac address table: up to 4096 ¡ñ e1 interface ¡ö bit rate: 2.048m bps ¡à50ppm ¡ö coding: hdb3 ¡ö timeslot control: pcm30£¬pcm31 ¡ö impedance: 120¦¸ (balanced), 75¦¸(unbalance) ¡ö port feature: comply with g.703 ¡ö connector: rj45 (120¦¸), bnc (75¦¸) ¡ö jitter feature: comply with g.745 and g.832 ¡ñ fxo/s interface ¡ö sampling frequency: 8k hz ¡à50ppm ¡ö encoding law: a-law ¡ö impedance: 600¦¸ ¡ö overload point: +3.14dbm ¡ö related standard: comply with itu-t g.712¡¢g.713 ¡ñ rs232 interface ¡ö interface rate: asynchronous rate: ¡ü19200bit/s ¡ö interface level: rs232 level ¡ö working type: dce ¡ö connector: rj45. ¡ñ v.35 interface ¡ö bit rate: n* 64kbps, n=1~32 ¡ö electrical feature: comply with itu-t v.35 ¡ö cpe port: comply with iso2593 ¡ñ nework management interface ¡ö port type: 10/100 base -t ¡ö interface level: rs232 level ¡ö protocol: tcp/ip ¡ö standard: comply with ieee 802.3 ¡ñ operation environment ¡ö working temperature: -10¡æ~ 60¡æ ¡ö storage temperature: -40¡æ~ 85¡æ ¡ö relative humidity: 0%~ 95%, non-condensing ¡ö no corrosive and solvent gas, no dust and heavy emi ¡ö power supply Ac 180v~ 260v Dc -72v~ -36v ¡ö power consumption: ¡ü 50w ¡ö physical dimension: 4u chassis: 482mm(w)* 177mm(h)* 280mm(d) Standard
Global Tech PMUX-E series manageable PDH has adopted the state-of-the-art technologies and advanced FPGA to provide 1E1/4E1/8E1/16E1 multiplexing and optical electrical regeneration. With plug and play modularized design, GP6 can support all kinds of customized service requirement. The equipment able to support more than 2FE with shared bandwidth 10/100/1000M. * Provide max. 16 E1 channel transparent transmission with 4 wire speed 10M/100/1000M Ethernet channels. Fully comply with G.703 and IEEE802.3 * With optical line bit rate at 155.52Mbps, reach the max. 120KM transmission distance. * 1+1 optical interfaces support forced switch and automatic protection switch. * Support Automatic Laser Shutdown on all optical interfaces. * E1 interface supports HDB3 E1 coding and comply with G.703, G.823 and G.742. * 4 Ethernet interfaces support full/half duplex auto negotiation. * Transparent transport IEEE802.1Q and flow control are provided at Ethernet Interfaces. * Sophisticated alarm function. Monitor the remote end equipment status from local end. * Support E1 loop back function on local and remote end, with convenience for equipment maintenance and management. * Support Engineering Order Wire with standard phone set. * Rack mounted chassis and standalone desktop configurations are available. * Desktop configuration provides RS232 management port. Chassis configuration provides Ethernet and RS232 management port. Both configurations support E1 in-band management. Specification Optical Interface * Wavelength: 1310nm, 1550nm * Tx Power: ¡Ý -10dBm * Rx Sensitivity: ¡Ü -35dBm * Rx Range: > 27dB * Connector: FC, SC Ethernet Interface * Work Mode: Full/half duplex, auto negotiation * Bit Rate: Support max. 100/1000M wired line Ethernet * Connector: RJ45 * Related Standard: IEEE802.3 * MDI/ MDIX auto negotiation. E1 Interface * Bit Rate: 2.048M bps * Coding: HDB3 * Impedance: 75,120 * Related Standard: ITU-T G.703, G.821, G.82 Operation Environment * Working Temperature: -10C~ 60C * Storage Temperature: -40C~ 85C * Relative Humidity: 0%~95%, non-condensing * No corrosive and solvent gas, no dust and heavy EMI * Power Supply: AC 220V, DC -48V.
Global Tech economic multi-service SDH is fully compliant with ITU-T and China domestic SDH standard, and can benefit your network with compact design, flexible topology and intelligent architecture. GT-SDH-155B provides two STM-1 optical line interfaces, versatile E1, V.35 and FE multiplexing and transmission, ITU-T G.813 compliant NE timing, VC-12 level switching and path protection mechanism. GT-SDH-155B can operate as ADM or TM to construct point-to-point, chain and ring networks. * Compact 1U design, 19¡± standards rack and less space consumption. * Support Ring,Chain and P to P topology structure, Perfect NMS and CLI Management. * 2 STM-1 optical interfaces, optional 1+1 protection operation. * 2~ 8 GFP applied FE interfaces(or droping in 2 Gigabit Ethernet), optional 4~ 16 E1 interfaces, 1~ 2 V.35 interfaces. * Configurable N* 64K V.35 interface, N=1~ 32. * Remote Power Monitoring and Loopback Test. * Remote management and centralized management. Support DCC over VC-12. * Dual power supply: DC -48V, AC 220V. Technical Parameter Optical Interface * Optical Port: S1.1, L1.1, L1.2 * Wavelength: 1310nm, 1550nm * Coding: NRZ * Max. Spectrum Width (RMS): G.957 * Max. Tx Power: -8/ 0dBm * Min. Tx Power: -15/ -5dBm * Extinction: 8.2/ 10dB * Rx. Sensitivity: -28/ -34dBm, BER 10-10 * Rx. Overload: -8/ -10dBm, BER 10-10 Ethernet Interface * 10M/ 100/1000M auto negotiation * Full/half duplex auto negotiation * MDI/ MDIX auto negotiation * Connector: RJ45 * Related Standard: IEE802.3, IEE802.1Q(VLAN) * MAC Address Table: Up to 4096 E1 Interface * Coding: HDB3 * Bit rate: 2.048M bps ¡À50ppm * Connector: BNC (75¦¸) / RJ11 (120 ¦¸) V.35 Interface * Bit Rate: N* 64Kbps, N=1~ 32 * Electric Feature: ITU-T V.35 * Terminal Interface: ISO2593 Operation Environment * Working Temperature: -50~ 50 * Storage Temperature: -40~ 85 * Related Humidity: 5%~ 95%, non-condensing * No corrosive and solvent gas, no dust and heavy EMI * Power Supply: AC 220V, DC -48V * Power Consumption: ¡Ü 20W * Physical Dimension: 483mm(W)* 45mm(H)* 154mm(D).
Global Tech GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations. GFP Interface Converters can transform traffic between E1 interface and Ethernet interface, and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range without any network reformation. Feature * GFP encapsulation based Ethernet interface can cooperate with other vendors GFP based Ethernet equipments. * Up to 4 Ethernet interfaces. * Switching Ethernet interfaces isolation is configured by E1 channel or 802.1Q through NMS, disabled by default. * Automatically Fault Shifting function. * Support Telnet/Web browser/SNMP NMS management. Strong NMS function to support client managing in complicate topology. Technical Parameter * E1 Interface - Bit Rate: 1.984M bps - Coding: HDB3 - Impedance: 75, Unbalanced/ 120, Balanced - Port Feature: G.703 and G.704 - Connector: Q9 (75)/ RJ45 or RJ48-C (120) * Ethernet Interface - 10M/100M auto negotiation - Full/half duplex auto negotiation - Port Quantity: 1, up to 4 ports - MDI/MDIX auto negotiation - Related Standard: G.7041, G.7042, G.7043, G.8040 * Optical Interface - Wavelength: 850nm, 1310nm, 1550nm - Optical Port: Single Fiber/ Dual Fiber, FC/SC, Transmission Distance, SMF/ MMF optional. - Tx Power: > -8dBm, 40km - Rx Sensitivity: < -36dBm, 40km * Operation Environment - Working Temperature: -10~ 55 - Storage Temperature: -40~ 70 - Relative Humidity: 5%~ 95%, non-condensing - No corrosive and solvent gas, no dust and heavy EMI - Power Supply: AC 180~ 260V, Desktop, DC -72~ -36V, Chassis - Support 1+1 dual power supply in chassis configuration - Typical Consumption: 5W, Desktop 75W, Chassis - Physical Dimension: Desktop, 19¡± Rack-mountable: 218mm(W)*44mm(H)*136mm(D) Chassis: 483mm(W)*171mm(H)*177mm(D).
