5.0mm with IXPE/EVA/Cork SPC Vinyl Flooring Living Room Spc Vinyl Flooring,SPC Vinyl Flooring EVA SPC means Stone Plastic Composite �An upgrade of LVT flooring �Made of lime stone ( calcium carbonate) +PVC powder + Stabilizer �Thickness of flooring: 3.2/4/5mm �Thickness of wear layer: 0.2/0.3/0.5/0.7mm �Structure of SPC PRODUCT FEATURES A. Waterproof and Damp proof       As the main component of SPC is stone power, so it performs well with water, and mildew will not happen with high humidity. B. Fire  Retardant       According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases. C. No Formaldehyde       Gold Lion SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal. D. No Heavy Metal, No Lead Salt       The Stabilizer of Gold Lion SPC is Calcium zinc, no lead salt heavy metal. E.  Dimensionaly Stable        Exposed to 80° heat, 6 hours---Shrinkage � 0.1%; Curling � 0.2mm F. High Abrasion       SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns. G. Superfine Anti-sliping       SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor, SPC flooring has higher friction when it's wet. H.  Low requirement of sub floor       Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloor.
3.2mm Living Room SPC Vinyl Flooring Environmental friendly SPC vinyl floor supplier ,SPC Vinyl Flooring Cork SPC means Stone Plastic Composite �An upgrade of LVT flooring �Made of lime stone ( calcium carbonate) +PVC powder + Stabilizer �Thickness of flooring: 3.2/4/5mm �Thickness of wear layer: 0.2/0.3/0.5/0.7mm �Structure of SPC PRODUCT FEATURES A. Waterproof and Damp proof       As the main component of SPC is stone power, so it performs well with water, and mildew will not happen with high humidity. B. Fire  Retardant       According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases. C. No Formaldehyde       Gold Lion SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal. D. No Heavy Metal, No Lead Salt       The Stabilizer of Gold Lion SPC is Calcium zinc, no lead salt heavy metal. E.  Dimensionaly Stable        Exposed to 80° heat, 6 hours---Shrinkage � 0.1%; Curling � 0.2mm F. High Abrasion       SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns. G. Superfine Anti-sliping       SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor, SPC flooring has higher friction when it's wet. H.  Low requirement of sub floor       Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloor.
Product Name: Glycerine Chemical Formula: C3H8O3 CAS Number: 56-81-5 Description: Glycerine, also known as glycerol, is a simple polyol compound widely used in various industries due to its versatile properties. It is a colorless, odorless, and viscous liquid with a sweet taste. Glycerine is hygroscopic, meaning it readily absorbs water from the air, and is miscible with water and alcohol, making it an excellent solvent and humectant. It is derived from both natural sources, such as vegetable oils, and synthetic processes. Appearance: Glycerine typically appears as a clear, colorless, and viscous liquid. Key Features: Humectant: Retains moisture, making it ideal for use in skincare and personal care products. Solvent: Excellent solubility in water and alcohol, making it a good solvent for various applications. Sweetener: Used as a sweetening agent in food and beverages. Lubricant: Provides lubrication in pharmaceutical and cosmetic formulations. Non-Toxic and Biodegradable: Safe for use in food, pharmaceuticals, and personal care products, and environmentally friendly. Applications: Personal Care Products: Skin Creams and Lotions Toothpastes Shampoos and Conditioners Soaps and Body Washes Food and Beverage Industry: Sweeteners in Food Products Preservatives Humectants in Baked Goods Pharmaceutical Industry: Excipients in Medicines Cough Syrups Suppositories Industrial Applications: Antifreeze and Coolants Lubricants Plasticizers Technical Specifications: Purity: 99.5% min Moisture Content: 0.5% max Specific Gravity (25°C): 1.26 - 1.30 pH: 5.5 - 8.0 Heavy Metals: â?¤ 5 ppm Chlorides: â?¤ 10 ppm Packaging: Glycerine is available in various packaging options to suit customer needs: 250 kg HDPE Drums 1250 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. Safety and Regulatory Information: Regulatory Compliance: Complies with USP, EP, BP, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Introduction Difenoconazole products 8% + Prochloraz-manganese chloride complex 20% 28% SC. Product Feature This product is a compound of triazole fungicide and imidazole fungicide. It has systemic conductivity and interferes with the normal growth of germs mainly by inhibiting ergosterol biosynthesis. It has a strong inhibitory effect on the spore formation of plant pathogens, and has a good prevention and treatment efficacy on a variety of crop diseases. Advantage Featuring strong systemic, fast-acting and long-lasting period, it has both prevention and treatment effects and is suitable for the control of various fungal diseases of rice, wheat, vegetables, strawberries and fruit trees. It has multiple effects such as enhancing crops' stress resistance. It has a good control efficacy on various crop diseases caused by imperfect fungi and ascomycetes. It has significant protection and treatment effects on three major rice diseases (sheath blight, rice blast and rice blight). It can also cure panicle syndrome at the later stage of rice (ear rot, leaf sheath rot, leaf smut, rice kernel smut, glume blotch, Sclerotinia rice, etc.). The two have completely different mechanisms of action and a significant synergistic effect. Low toxicity, high efficiency, broad spectrum, and safety to crops. High content, low dosage, and easy to use. This agriculture fungicide can provide trace manganese elements required by crops, and it is also added with high-efficiency adjuvants, which can enhance crop stress resistance and promote root and seedling growth, thus achieving increased yields.
* Acetic Acid * Acrylamide * Acrylic Acid * Alkalized Cocoa Powder * Aluminium Sulphate * Ammonium Bicarbonate * Ascorbic Acid * Barium Carbonate * Borax Decahydrate * Borax Pentahydrate * Boric Acid * Calcined Alumina * Caustic Soda Flakes * China Clay * Chromic Acid * Citric Acid Anhydrous * Citric Acid Monohydrate * Calcined Kaolin Clay * Desiccated Coconut Low Fat * Di Acetone Alcohol * Dextrose Anhydrous * Dextrose Monohydrate * Diammonium Phosphate * Farmer Choice Whey Powder * Formic Acid * Glucose * Glycerin * Guar Gum * Gum Rosin * Hydroxyethyl Cellulose * Hydrogen Peroxide * Iso Propyl Alcohol (I P A) * Mono Ethylene Glycol (MEG) * MaltoDextrine * Methanol * Methlylene Chloride * Nonylphenol Polyethylene Glyco ether (NP 9) * Natrosol * PVA BP17 * PVA BP26 * PVA 217 * Phenol * Phosphoric Acid * Potassium Carbonate * Potassium Hydrate * Potassium Sorbate * Propylene Glycol (PG) * Sodium Acid Pyrophosphate (SAPP) * Soda Ash * Sodium Benzoate * Sodium Bicarbonate * Sodium Carboxmethyl Cellulose (CMC) * Sodium Gluconate * Sodium Lauryl Sulfate (SLS) * Sodium Lauryl Ether Sulfate (SLES) * Sodium MetaBisulphate * Sodium Sulphate Anhydrous (SSA) * Sodium Sulphide Flakes (SSF) * Sodium Tripoly Phosphate STPP * Sorbitol * Sulphate of Potash (SoP) * Skimmed Milk Powder * Soya Lecithin * Speckles * Starch * Stearic Acid * Sulphonic Acid * LABSA 90% & 96% * Titanium Dioxide Anatase (HA-100, AF-5C)0, AF-100) * Titanium Dioxide Rutile (2190, R996, R6618) * Tri Sodium Citrate * Tri Sodium Phosphate (TSP) * Urea * White Oil * Xanthan Gum * Yeast * Zirconium Silicate * Zinc Oxide
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Basic Information: It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc. Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. 1. Application Method and Notice 1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application. 2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete. 3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better. 4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials. 5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending. 1.Suitable for long-distance construction projects type pumping concrete. 2.Suitable for compounding normal concrete,high-performance concrete,high-strength concrete and ultra-high strength concrete. 3.Suitable for impervious,antifreezed and high durability concrete. 4.Suitable for high-performance and high flowing concrete,self-leveling concrete,fair-faced concrete and SCC(self compact concrete). 5.Suitable for high dosage of mineral powder type concrete. 6.Suitable for mass concrete that used in expressway, railway, bridge, tunnel, water conservancy projects, ports, wharf, underground etc.
Product Name: Alpha Olefin Sulfonate (AOS) 38% Chemical Formula: R-CH=CH-(CH2)n-SO3Na CAS Number: 68439-57-6 Description: Alpha Olefin Sulfonate (AOS) 38% is an anionic surfactant widely used in various cleaning and personal care products. It is derived from alpha-olefins, resulting in a product that offers excellent detergency, emulsification, and foaming properties. AOS 38% is known for its mildness on the skin and its compatibility with other surfactants, making it a popular choice in formulations that require strong performance with minimal irritation. Appearance: AOS 38% typically appears as a clear to pale yellow liquid with a characteristic mild odor. Key Features: Superior Detergency: Efficiently removes dirt, oils, and grease. Excellent Foaming: Produces rich and stable foam, enhancing cleaning performance. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Gentle on skin, making it suitable for personal care products. Biodegradable: Environmentally friendly and breaks down easily in the environment. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Industrial Detergents Vehicle Wash Solutions Hard Surface Cleaners Technical Specifications: Active Matter: 38% min Sodium Chloride: 7% Sodium Sulfate: 1.5% pH (10% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 50 Hazen Packaging: AOS 38% is available in various packaging options to suit customer needs: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Soda Ash Chemical Name: Sodium Carbonate Chemical Formula: Na2CO3 CAS Number: 497-19-8 Description: Soda Ash, also known as Sodium Carbonate, is a highly versatile and widely used industrial chemical. It appears as a white, odorless powder or granular material and is known for its alkalinity. Soda Ash is used in a variety of applications, including glass manufacturing, water treatment, detergents, and chemical production. Appearance: Soda Ash typically appears as a white, odorless powder or granular material. Key Features: High Alkalinity: Provides effective pH control and neutralization of acids. Versatility: Suitable for a wide range of industrial and domestic applications. Excellent Solubility: Easily dissolves in water to form a strongly alkaline solution. Efficient Cleaning Agent: Enhances cleaning power in detergents and cleaning products. Cost-Effective: Economical source of sodium ions and alkalinity for industrial processes. Applications: Glass Manufacturing: Key raw material in the production of glass. Enhances the workability and chemical properties of glass. Water Treatment: pH adjustment and water softening. Removes hardness and reduces acidity in water. Detergents and Cleaning Products: Boosts cleaning power in laundry detergents and household cleaners. Used in automatic dishwashing detergents. Chemical Production: Manufacture of sodium-based chemicals. Used in the production of sodium bicarbonate, sodium silicate, and other sodium compounds. Pulp and Paper Industry: Used in the pulping process and as a pH regulator. Metallurgy: Used in the smelting and refining of metals. Technical Specifications: Purity: 99.2% min Sodium Chloride (NaCl): 0.7% max Iron Content: 20 ppm max Moisture Content: 0.05% max Bulk Density: 0.95 - 1.05 g/cm�³ Packaging: Soda Ash is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 1000 kg Jumbo Bags Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid inhalation and contact with skin and eyes. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures
Product Name: Caustic Soda Chemical Name: Sodium Hydroxide Chemical Formula: NaOH CAS Number: 1310-73-2 Description: Caustic Soda, also known as Sodium Hydroxide, is a highly versatile and widely used chemical with strong alkaline properties. It is commonly available in solid form (flakes, pearls, or pellets) and in aqueous solutions. Caustic Soda is essential in numerous industrial processes, including chemical manufacturing, water treatment, and cleaning applications. Appearance: Caustic Soda typically appears as white solid flakes, pellets, or a colorless solution. It is odorless and highly caustic, capable of causing severe chemical burns. Key Features: Strong Alkalinity: Highly effective in neutralizing acids and dissolving organic materials. Versatile Use: Widely used across various industries for its chemical reactivity and cleaning properties. Highly Soluble: Easily dissolves in water, forming a strongly alkaline solution. Efficient Cleaning Agent: Removes grease, oils, fats, and other organic materials efficiently. pH Adjustment: Commonly used for pH regulation in various processes. Applications: Chemical Manufacturing: Production of various chemicals including detergents, soaps, and synthetic fabrics. Manufacture of paper and pulp. Production of aluminum through the Bayer process. Water Treatment: pH adjustment and water purification. Removal of heavy metals and other contaminants. Textile Industry: Textile processing and dyeing. Mercerization of cotton. Cleaning and Detergents: Industrial cleaning agents. Household drain cleaners. Food Industry: Food processing and preparation. Used in peeling fruits and vegetables, processing cocoa and chocolate, and making caramel. Technical Specifications: Purity: 99% min Sodium Carbonate: 0.5% Sodium Chloride: 0.03% Iron Content: 20 ppm Appearance: White solid (flakes/pearls) or colorless solution Packaging: Caustic Soda is available in various packaging options to meet customer needs: 25 kg HDPE Bags with inner lining 50 kg HDPE Bags with inner lining 250 kg Drums Bulk packaging and customized packaging options available on request Storage and Handling: Store in a cool, dry, and well-ventilated area away from moisture and incompatible materials such as acids. Ensure containers are tightly closed when not in use. Handle with care using appropriate personal protective equipment (PPE) to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, OSHA, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Density 1.3 ± 0.1g /cm3 Boiling point 227.6 ±0.0 °C at 760 mmHg Melting point 18 ºC Molecular formula C3H6O3 Molecular weight 90.078 Flash point 109.9 ±16.3 °C Exact mass 90.031693 PSA 57.53000 LogP minus 0.70 Appearance Colorless to yellow liquid Vapor pressure 0.0 ±1.0 mmHg at 25 °C Refractive index 1.451 Storage condition 1.20kg glass bottles are packed in wooden cases or sealed in plastic drums. Store in a clean and dry place. 2. Pharmaceutical small package of 500g, reagent bottle. Edible lactic acid is packed in plastic drums with a net weight of 25kg per barrel. Keep it sealed. Storage and transportation in accordance with general chemical regulations. stability 1. Chemical properties: Lactic acid has hydroxyl and carbonyl groups, and when heated, it generates linear polyester like lactide. The initial esterification product is lactoyl lactic acid, and polylactic acid is formed with increasing concentration. Most of them form linear polymers, and some of them form lactide. Lactic acid is decomposed into acetaldehyde, carbon monoxide and water. A polymer of lactic acid that is decomposed into acetaldehyde and carbon monoxide in the presence of a catalyst. However, acrylates and acetic acids are produced by the dry distillation of lactate diesters. Lactic acid has the properties of general organic acids, and its salts are soluble in water. It can form esters with most alcohols. To inhibit the formation of lactic acid polymers, excess alcohol can be used. The hydroxyl group in lactic acid molecules can also react with organic acids, anhydrides, and acyl chloride to form esters. When heated with dilute sulfuric acid, it breaks down into formic acid and acetaldehyde. 2. Pure products are non-toxic. Its salts are non-toxic as long as they are not heavy metals. Oral LD503730mg/kg for rats. 3. It exists in tobacco leaves and smoke. 4. Naturally found in cooked beef, cocoa, and wheat breads. 5. In addition, it also exists in muscles, especially after intense muscle activity, the content of lactic acid increases, so the feeling of muscle swelling. Water solubility: completely miscible; Soluble in: alcohol; Insoluble: Chloroform Molecular structure 1, molar refractive index: 19.00 2, molar volume (cm3/mol) : 70.5 3. Isotropic specific volume (90.2K) : 187.4 4, surface tension (dyne/cm) : 49.7 5, dielectric constant (F/m) : 6. Dipole distance (D) : 7. Polarizability (10-24cm3) : 7.53
BIO PLANT GROWTH REGULATOR COMPOSITION:- Muli ka Namak (Salt's of Radish):- Gives Strength to Whole body of Plants 35%. Khara Namak (Natural Refined Sodium Chloride):- Acts as a fastening agent & gives a permanent Strength to plant 35% Safed Musli (Chloro nhvtom Borivilinium) 15% Aswa gandha ( Indain Ginseng) : Gives Strength for plant hormones 15%. TOTAL . 100% PRODUCT DESCRIPTIONS (1) BIO Plant Growth Regulator is chemical free, plant origin secondary metabolites extracted from various wild herbs aqueous extract. All herbs are naturally collected and manufactured by using specially developed extraction process. (2) BIO Plant Growth Regulator is ecofriendly, nontoxic, herbal extract does not contain any chemical solvents or preservatives. (3) BIO Plant Growth Regulator contains various plant glycosides, alkaloids and other secondary metabolites in such a low concentration that it induces various plant metabolic pathways in the plants. It helps plant to overcome various biotic and abiotic stresses without any phyto-toxicity. FEATURES & BENEFITS:- (1) BIO Plant Growth Regulator helps overcoming various biotic and abiotic stresses. (2) Use of BIO Plant Growth Regulator helps in improving uptake of nutrients from soil. (3) Regular use of BIO Plant Growth Regulator improves quality and quantity of produce. (4) Use of BIO Plant Growth Regulator improves flower and fruit settings and reduces flower and fruit drop. (5) BIO Plant Growth Regulator is eco-friendly and no toxicity to plant. USAGE:- CROPS - All types of Cereal crops, Horticultural crops, vegetable crops , Oil seed Crops, Legume crops/Pulses, Viticulture, Plantation crops, Floricultural crops, Cover crops, Cash crops etc. MODE OF ACTION (1) Bio Plant Growth Regulator could be used as part of an integrated plant nutrition and stress management program or when deficiencies are suspected. (2) Bio Plant Growth Regulator to be used for foliar application which will induces shoot development. (3) Bio Plant Growth Regulator is compatible with all the other agricultural supplements and microbial products. DOSAGE:- Use Bio Plant Growth Regulator used at the rate of 1gm per 150 liters of water for foliar application. Use Bio Plant Growth Regulator fortnightly from vegetative growth till fruiting for optimum results
Iron Oxide Pigment Supplier Iron oxide pigment is the second largest inorganic pigment after titanium dioxide and the first largest colored inorganic pigment. It mainly contains iron oxide red, iron oxide yellow, iron oxide black and iron oxide brown pigments with iron oxide as the basic substance. In addition, more than 70% of all consumed iron oxide pigments are prepared by chemical synthesis methods, called synthetic iron oxide, such as green iron oxide, etc. ...... We can supply iron oxide pigments in various colors. Browse the products below to find the pigment you need, or contact us if you need help. We will help you select the right iron oxide pigment for your unique needs. What are the properties and advantages of iron oxide pigments High chemical stability and physical durability. Alkali-resistant. It is very stable to any concentration of alkali and other types of alkaline materials, especially cement and lime mortars commonly used in construction, without chalking or affecting the strength of cement building components. Acid Resistance. It is resistant to weak and dilute acids in general, but is also soluble in strong acids, especially when heated and concentrated. Light resistance. The color remains unchanged under strong sunlight. Heat resistance. It is stable within a certain temperature limit, beyond which the color begins to change. As the temperature rises, the degree of change becomes more pronounced. Weather resistance. It is unaffected by climatic conditions such as cold, heat, dry and wet. Dirty Air Resistance. It is stable in any dirty gas, such as hydrogen sulfide, carbon monoxide, sulfur dioxide, hydrogen chloride, nitric oxide and other gases. Water, oil, solvent resistance. Insoluble in water, various mineral oils, vegetable oils and organic solvents such as ether, ester, ketone, etc., and impermeable. Bright and clear color, unique hue. The color of iron oxide pigment is so clear and pure that it does not need to be embellished with other organic or inorganic pigments. Excellent economic efficiency. Iron oxide pigment has high coloring power, fine and uniform particle size, which ensures its value of use, together with lower selling price, it can ensure the economic effect of users.
Titanium tubes come in various grades, each with specific properties suited to different applications. Titanium alloys are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, making them ideal for a wide range of industries, including aerospace, medical, chemical processing, and marine. Here are some common grades of titanium tubes: Grade 1 (UNS R50250): Commercially pure titanium with excellent corrosion resistance, high ductility, and good weldability. Grade 1 titanium tubes are often used in applications where corrosion resistance and formability are essential, such as chemical processing equipment, heat exchangers, and marine components. Grade 2 (UNS R50400): Commercially pure titanium with slightly higher oxygen content than Grade 1, resulting in improved formability and moderate strength. Grade 2 titanium tubes are widely used in aerospace, marine, and medical applications, as well as in heat exchangers, piping systems, and condensers. Grade 5 (Ti-6Al-4V, UNS R56400): An alpha-beta titanium alloy containing 6% aluminum and 4% vanadium, offering excellent strength, toughness, and corrosion resistance. Grade 5 titanium tubes are commonly used in aerospace, automotive, and biomedical applications, as well as in high-performance sports equipment and marine components. Grade 9 (Ti-3Al-2.5V, UNS R56320): An alpha-beta titanium alloy containing 3% aluminum and 2.5% vanadium, providing a good balance of strength, weldability, and corrosion resistance. Grade 9 titanium tubes are often used in aerospace structures, bicycle frames, and marine components where high strength and corrosion resistance are required. Grade 12 (Ti-0.3-Mo-0.8Ni, UNS R53400): An alpha-beta titanium alloy containing 0.3% molybdenum and 0.8% nickel, offering excellent corrosion resistance in oxidizing and reducing environments. Grade 12 titanium tubes are commonly used in chemical processing, desalination plants, and marine applications where resistance to chlorides and seawater is critical. Grade 23 (Ti-6Al-4V ELI, UNS R56401): An extra-low interstitial version of Grade 5 titanium with enhanced fracture toughness and biocompatibility, suitable for medical implants and surgical instruments. These are some of the commonly used grades of titanium tubes. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, temperature requirements, and cost considerations. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
We are China biggest oxidized polyethylene wax manufacturer with capacity 15,000MT per year,we have been in production of OPE wax more than 20 years. With the high and stable quality,currently we have taken China biggest market share in pvc foam board,WPC,SPC and pvc stabilizer.We also have taken India 1st market share since 2017 which could be seen from the India custom data. We have advantages in high density oxidized polyethylene wax , Our OA series OPE wax can completely replace Honeywell and BASF products with more competitive price widely used in the PVC products and PVC stabilizer industry. We have also established long-term cooperation with international stabilizer manufacturers such as Baerlocher and Sunace in some advantage products like OA716 which has high melt point and good fusion,it can be used in most pvc products to replace Honeywell AC316. OA719 which has high viscosity and high melt point to replace Honeywell AC307,with the highest viscosity it take good dispersivity in high filler formulation and promote good fusion to have better surface in pvc products. OA316A+ our R&D work out the advantage catalyst same as A-C 316A, it is the only grade in the market could totally replace Honeywell A-C 316A in most application like PVC products, PVC foam board, calcium zinc stabilizer, PVC stabilizer, color masterbatch, coating, cable,emulsion , printing, dyeing and textile, asphalt modification, etc.
Iron Oxide Pigment For Plastic Cement Characteristics: Bright colour, strong colouring power, high purity, resistant to strong sunlight, resistant to atmospheric influences, resistant to dirty gases and various climate changes. Good alkali resistance, poor acid resistance. Rubber products coating adhesion is quite large, in sunlight, air, acid and alkali in the heat of sulphuric acid that is reactive, in the case of sulphur or hydrogen sulphide does not change. Stability requirements for moulding and processing are not strict on the processing temperature requirements. Used in brake pads, brake panels and other asbestos plastic products can improve the coefficient of friction and reduce friction loss. Economical to use. Usage The use of iron oxide pigment in rubber: Generally, the raw rubber is cleaned and refined, and then mechanically processed to get the necessary plasticity, and then added with vulcanising agent and fillers such as iron oxide pigment, zinc oxide and calcium carbonate for blending to get the raw rubber. Then it is processed and moulded into various rubber parts. Applications In the application of rubber and plastics, iron oxide red, which does not contain heavy metal ions such as copper and manganese, can be used in aviation tyres to prevent the aging of rubber. Iron oxide pigment has strong colouring power and pure colour, it is used as colouring agent and filler in PVC plastic flooring and PVC colouring film, and it can be used in thermosetting plastics such as Bakelite powder, Bakelite powder and polyolefin. In thermoplastic plastics: the use of iron oxide pigment in masterbatch or slurry preparation will be more popular in the industry.
We sell premium motor/engine oil in large volumes on spot and long-term contracts: Our Product Line Includes: - Car Oils: PCMO 15W40 SJ/CF, PCMO 10W40 SN/CF, PCMO 5W40 ECO SN/CF C3, PCMO 5W30 ECO SN/CF C3. - Motorcycle Oils: SEO 2T, SEO SYNT 2T, SEO 4T 10W-40, SEO 4T 5W-40. - Gear Oils: AGO EP 80W-90, AGO SYN 75W90, AGO EP 85W-140, LS 90, GL 140, ATF DX II, ATF DX III. - Agricultural Machinery Oils: SUPERSTOU 10W-30, STOU 15W-40, UTTO 80w, TO 4 10w. - Hydraulic Oils: HM 32,46,68 and HV 32,46,68. - Coolants and Brake Fluid: ACF RTU 40, ACF PURE, ACF RED, ABF DOT 4. - Greases: GREASE NLGI 2.5 CALCIUM, EP GREASE NLGI 2 LITHIUM, MOLYGREASE MOLYBDENUM. - Heavy Duty: HDDEO 15W-40, 10W-40, 5W30, 15W-40 LL. The packaging options include 12x1 liter bottles, 4x5 liter jugs, a 20 liter drum, a 200 liter barrel, and a 1000 liter IBC container or other formats as per buyer's request. All our products are manufactured in compliance with global industry standards and governmental regulations and certifications, ensuring that you receive only the best in quality and performance. We are committed to excellence, and our oils are formulated to help your engines run smoother and last longer.
Product Name: Acai Powder Product Code: WH1001 Description: The acai berry is the fruit of the acai palm (Euterpe oleracea), native to the amazon, and has been consumed for centuries in popular recipes in the north of Brazil. This super fruit of purple color and remarkable flavor is rich in anthocyanins(a natural constituent with antioxidant activity), amino acids, essential fatty acids, fibers, proteins, and minerals (mainly calcium and potassium). This dehydrated ingredient is obtained from selected acai juice, and dried by atomization(Spray Dryer). Common Uses and Orientative Dosage: Food supplement 500.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Bordeaux Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Moisture Max. 5.00 g/100g Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Particle Size 0.42mm(40 mesh) Max. 5.00 g/100g Total Polyphenols Min. 0.30 g/100g CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Negative/g Escherichia Coli Negative/25g Yeasts and Molds Max. 1.000.000 UFC/g Salmonella Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
We supply Highquality drinking water bottles Our Manufacturing setup is established in India near the Himalayan Range If you are looking for highquality waterIntroducing Vardara a packed Natural premium quality water bottle Our Water is sourced from the pristine glaciers and springs in the Himalayas where it is naturally filtered through layers of rock formations making it one of the purest forms of natural water available It is free from any harmful chemicals and pollutants ensuring that consumers get to experience the true flavour of nature Here are some key features and benefits of Vardara that set it apart from other drinking water brands Refreshing Taste Vardara has a refreshing and crisp taste that will quench your thirst and leave you feeling revitalized Perfect pH Level Our water has a pH level of 7276 an excellent choice for maintaining a healthy pH balance in the body Rich in minerals Our Water is naturally enriched with essential minerals like calcium magnesium and potassium making it an excellent source of nutrients that your body needs to function optimally Quality assurance We use advanced purification techniques to ensure that our water is of the highest quality Our stateoftheart bottling facility is equipped with the latest technology and we follow strict quality control measures to ensure that our water meets the highest standards Convenient packaging Our water is available in convenient sizes 250ml500ml and 1000ml Our plastic bottle is BPAfree At Vardara we are committed to providing our customers with the purest and most refreshing natural mineral water straight from the source With its unique blend of minerals and refreshing taste it is a topquality drinking water that you can trust
We supply High-quality drinking water bottles. Our Manufacturing setup is established in India near the Himalayan Range. If you are looking for high-quality water.Introducing Vardara a packed Natural premium quality water bottle. Our Water is sourced from the pristine glaciers and springs in the Himalayas, where it is naturally filtered through layers of rock formations, making it one of the purest forms of natural water available. It is free from any harmful chemicals and pollutants, ensuring that consumers get to experience the true flavour of nature. Here are some key features and benefits of Vardara that set it apart from other drinking water brands: Refreshing Taste: Vardara has a refreshing and crisp taste that will quench your thirst and leave you feeling revitalized. Perfect pH Level: Our water has a pH level of 7.2-7.6, an excellent choice for maintaining a healthy pH balance in the body. Rich in minerals: Our Water is naturally enriched with essential minerals like calcium, magnesium, and potassium, making it an excellent source of nutrients that your body needs to function optimally. Quality assurance: We use advanced purification techniques to ensure that our water is of the highest quality. Our state-of-the-art bottling facility is equipped with the latest technology, and we follow strict quality control measures to ensure that our water meets the highest standards. Convenient packaging: Our water is available in convenient sizes (250ml,500ml and 1000ml. Our plastic bottle is BPA-free. At Vardara, we are committed to providing our customers with the purest and most refreshing natural mineral water, straight from the source. With its unique blend of minerals and refreshing taste., it is a top-quality drinking water that you can trust. Feel free to contact us if you have any requirements for a Packed water bottle. Pricing will be discussed after your response. We can also customize bottles according to your requirements if possible in our hands. I hope we have a wonderful and trustable collaboration in the future.
Silicon slag is a grayblack granular solid waste produced by partial oxidation and partial reduction of silicon materials at high temperatures Silicon slag mainly comes from silicon material processing processes in the metallurgy and semiconductor industries such as silicon wafer slicing ferrosilicon smelting and other processes The main components of silicon slag are SiO2 and a small amount of FeO Al2O3 CaO and other elements and oxides 1 Make cement Silica slag can be used as an additive in cement clinker to replace some materials such as plaster of paris or fly ash in cement clinker Silica slag can promote the hydration reaction of cement clinker and enhance the early strength and longterm performance of cement 2 Making glass Silica slag is an important raw material for glass manufacturing It can replace part of the raw materials such as quartz sand and sodium carbonate reduce the cost of glass production and at the same time improve the quality and weathering resistance of the glass 3 Manufacturing Ceramics After silicon slag is mixed with materials such as alumina calcium oxide and magnesium oxide highperformance refractory ceramic materials can be prepared These materials have excellent properties such as hightemperature fire resistance high strength and wear resistance and are widely used in hightemperature furnaces chemical equipment and other fields 4 Manufacturing building materials Silica slag can be used as a raw material for manufacturing building materials such as building bricks sound insulation panels and thermal insulation materials Building materials made of silicon slag have high strength wear resistance fire resistance and other properties and also have good heat and sound insulation properties 5 Other uses Silicon slag can also be used to manufacture graphite electrodes iron oxide pigments electrical insulation materials and other products In addition silica slag can also be recycled such as used to make road hardeners lowcarbon cement etc