Automobile Glass Suppliers and Manufacturers

Tempered glass Wooden crates

Glass fiber Fiber made from melted glass that is drawn into a thin fiber less than a thousandth of an inch in diameter. The fiber may be spun into threads and woven into fabrics which suitable for many applications, such as removal of micron and submicron size particulates from both liquids and gases or used in an acoustic, electrical, or thermal insulating material. Feature: 1.Lightness, heat resisting, low thermal capacity and low thermal Conductivity, soft and excellent fire-isolation. 2.Anti-heat energy and heat stability. 3.Anti-mildew, anti-insect, un-scattered and good stretching Resistance. 4.Excellent anti-ageing. 5.Excellent sound absorbability, adsorption and filtering. 6.It can be cut, sewn according to requirements and it's also easy to Construct. Application: 1.These products are widely used for wrapping material of all kinds of heat source (coal, electricity, oil, and gas) and heat-presentation Of central air-conditioning pipelines. 2.It can be used as the materials for heat-isolation and fire -resistance. 3.It can be used as the materials for seal, sound absorption filtering and insulation. 4.Excellent material for heat-conducting, heat-presentation. 5.It can be used as materials for sound isolation, heat insulation 6.It can also be used for touching fire and all kinds of flue in which the temperature is less than 600f¦.

Glass mosaic 305x305mm/sheet 11sheet/ctn; 13kg/ctn

Glass still The distillation yields sufficient output of 1.5liter/hr.The unit is demountable.

Flat glass

Hollow glass microspheres, made of Soda Lime Borosilicate Glass, are hollow spheres which grain size is 10-250microns, wall-thickness 1-2 microns, filled with inert air or gas. They are produced at the high temperature of 700-800 degrees Celsius through complicated chemical and physical transformation. Hollow glass microspheres are white and the specific gravity of them is about 0.25-0.60g/cc. They have much merit, such as lightweight, great buoyancy, hard, rigid, waterproof, innoxious, insulative, low heat conductivity, higher mechanical strength and excellent chemical stability,etc. Their surface was treated by the special way and the products are dispersed very easily in organic materials such as resin. �  Hollow glass microspheres are widely used in composite materials such as FRP, man made marble and man made agate. They can decrease the weight of the composite materials and the composite materials have excellent performance of sound insulation and heat preservation, and they can improve the mechanical performance of the composite materials such as strengthened rigidity, enhanced anti-impact property, excellent anti-breaking property and re-processing function. Hollow glass microspheres are applied in a wide range of fields such as aviation, space flight, new bullet train, luxurious yacht, adiabatic dope, bowing balls, in which they play a distinctive role. Hollow glass microspheres are the excellent sensitized of emulsion explosive. They can improve the detonation property of emulsion explosive and prolong the shelf period of emulsion explosive. When used in the resin putty, hollow glass microspheres can increase the volume of resin putty, improve its polishing function. Packing: net 10kgs in Plastic film lined plastic weaving bags or strong cartons. Hollow glass microspheres series

G type tempered glass lid Glass thickness:4mm Stainless steel Rim:201 Size:12cm-38cm Normal dome and High dome

Screen Protector Film for IphoneX 3D 9H Explosion Proof for iPhone X/ XS Tempered Glass Screen Protector Our mobile phone screen protector is made of tempered glass and features a super hardened edge which provides exceptional protection against chips and cracks as well as scratches from keys, sand and other hard objects. The ultra-thin glass also features an anti-glare and fingerprint resistant treatment, keeping your screen clean and easy to see in brightly lit environments. Super hardened edge treatment protects against chips and cracks Made with ultra-tough tempered glass 9H level scratch protection Edge-to-edge coverage Anti-fingerprint and anti-glare treatment Easy to install

Glass Bottle Filling Sealing Machine works on volumetric principle with diving nozzles. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor, Reciprocating Nozzle with self-centering devices & SS Syringe. No container No filling system arrangement is standard features of the machine. The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive.

Factory supply weighted blanket glass beads filling glass beads Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.

1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment.

China wholesale price 13.52mm SGP tempered laminated glass,6mm +1.52mm clear SGP+6mm factory safety toughened glass What is SGP laminated glass? SGP=SentryGlasPlus. SGP intermediate film is DuPont's newly developed, it is a major innovation in the technology of laminated glass interlayer. SGP film beyond the existing technology, greatly expanding the performance of laminated glass. SGP has high strength, high transparency, durability, a variety of structures and flexible installation, very suitable for the current construction market requirements. Compared with SGP laminated glass and PVB laminated glass,SGP laminated glass have stronger impact resistance, anti-theft performance, explosion-proof performance and anti-disaster performance, and can reduce the thickness of laminated glass to a certain extent. SGP laminated glass performance data: Glass composition 2pcs of 6mm low iron tempered glass with 1.52mm SGP film Glass size max size can be reached to 3300x13000mm, any customized size available Glass type 13.52mm low iron laminated glass, others available in 13.52mm clear laminated glass, 664 color tinted laminated glass, 6+6mm color reflective laminated glass, 664 laminated frosted glass, etc. Interlayer film SGP film, others available in PVB/EVA film Special processing polished edge, cutout, drill holes, logo printing, heat soaked, etc Glass advantage hurricaneproof, stormproof, bulletproof, etc SGP Safety Laminated Glass Additional Attributes: Fragment retention if broken. Meets safety glazing standards. Hurricane protection. Meets impact& cycling resistant standards. Intrusion resistance and forced entry SGP film with excellent adhesive strength of metal, can bond of online LOW E glass can be Energy-saving laminated glass, possible to replace of Low E insulated glass. Application: Bullet-proof glass, explosion-proof glass for armored vehicles, prisons, banks and other Handrails, railings, glass stairs steps, anti-hurricane construction Hurricane protection ceiling,windows, doors and skylight. High speed train windshield. Scenic spot glass fence and glass bridge. What kinds of SGP laminated glass you can get it fromâKXGâGlass? 1.Clear Laminated Glass with SGP 2.Ultra Clear Laminated Glass with SGP 3.Color laminated glass with SGP,like gray laminated glass with SGP,bronze laminated glass with SGP,F-green laminated glass with SGP,blue laminated glass with SGP,etc. 4.Thickness available in 13.52mm,17.52mm,21.52mm,27.04mm,33.04mm,41.04mm,etc.customized SGP laminated glass. For example:13.52mm SGP tempered laminated glass=6mm tempered glass+1.52mm SGP+6mm tempered glass.

SGP Laminated tempered Glass China factory, toughened laminated glass with 0.89mm,1.52mm,2.28mm SGP interlayer Sentry glass plus interlayer (SGP) for laminated safety glazing is the latest innovation in Dupont's family of glass laminating products, It extends the performance of laminated glass beyond current technologies. Sentry glass plus inter layer offers 5 times the tear strength and 100 times the rigidity of conventional PVB inter-layer. Because of its added strength, clarity, durability, fabrication and installation ease, it is an excellent candidate for demanding applications in the architectural market place. It can offer improved ballistic protection or thinner constructions than are now possible with conventional laminated glass. SGP laminated glass inter-layer tear strength is five times than the normal PVB, a hundred times  hardness for PVB ,is the best material for made Bullet-proof glass. SGP film with excellent adhesive strength of metal, can bond of online LOW E glass can be Energy-saving laminated glass, not only has anti sling security, but also with Low E glass energy saving function, possible to replace of Low E insulated glass.�  Specification�  Size: Max 3000*5000mm, Mini 300*300mm, any customized size could be produced. Thickness: glass substrates could be 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, etc.,SGP thickness 0.89mm, 1.52mm, 2.28mm,3.04mm, etc. Glass type: Clear float glass,â??low iron float glass/ ultra clear float glass,â??tempered glass, low-e glass, acid etched glass, screen-printed glass, etc.�  SGP laminated glass characteristicsï¼?�  1. Compare with PVB laminated glass, the strength more higher, more transparent, the best configuration of super clear float glass 2. SGP laminated glass tearing strength is 5 times of PVB laminated glass 3. SGP laminated glass with high strength, can directly to use as the glass curtain wall structures 4.Can according to architectural design requires homogenization and heat soak process treatment  SGP safety Laminated Glass Additional Attributes�  Fragment retention if broken.�  Meets safety glazing standards.�  Hurricane protection Meets impact& cycling resistant standards. Intrusion resistance and forced entry The superiority SGP film compare PVB film SGP film laminated glass equivalent thickness = two glass panel plus PVB film laminated glass equivalent thickness = single panel glass x1.25

Reflective Glass Bead for Marking & Traffic Paint Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on.

Glass bead for sand blasting 1,Road making, airport road marking; 2,Fillers for various insulation and sound insulation products; 3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc 4,provide brightness for medical mechanical instruments and automobile parts 5,Be used for reflective safety clothing to improve safety.

Details: 1.Place of original: CHINA 2.Material: Glass 3.Proportion: : 2.5g/m3 4.Bulk density: 1.5g/m3 5.Mohs hardness: 6-7 6.Rockwell hardness: 46HRC 7.Usage: Road-marking glass;Sandblasting ; Weighted Blanket, toy filling. 8.Reflective: 1.5-1.7 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or  as customer's requirement. 10.Certificate: ISO9001, 11.Sample: free 12.MOQ: 1ton 13.Color: Transparent

Hexin glsss printed glass is one kind of decorative and safety glass, it's also called color glass.Inorganic color glaze is pressed on the glass surface by roller or silkscreen printing, then by drying, tempering or heating to make the ink can be permanently on the surface.The glass has variety of colors and decorative patterns. We have been for many years the chinese leading silk screen printers of glass for the production of pub mirror and promotional items for some of the world's leading brand. Our printing team high tech machinery and wide ranger of 2 pack inks help us achieve the desired finish our clients are looking for.Large bulk orders are no problem and we also have designers who can help with fine detailed images. Characteristic Painted surface is smooth, easy cleaning; Special resistance to humidity making it ideal for use in high humidity rooms like kitchens and bathrooms Use lead free safety paint, human harmless and environmental protection Various colors and patterns (customizable), durable outstanding effect; Absorbing and reflecting solar energy, improving solar control; Optimal concealing effect, protecting privacy; Heat treated, improved strength can be low-e coated, laminated, igu assembled for multiple functions. Specification Thickness: 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm Color: black, white, red, yellow, blue, green, gray, purple, any pantone series color Pattern: dot pattern, line pattern, and any other customized patterns Size: max 2000*4500mm, mini 300*300mm, any customized size as per clients requirements Thickness:3mm-19mm Application Interior partitions and office enclosures Shower doors and kitchen splash backs Balustrades and railings Flooring and staircases Furniture like table tops, cabinet doors Many others

Difference between three high efficiency solar vacuum tube (effective tubes, high cold tube, high temperature special efficiency tube)and ordinary tube: Absorption of heat membrane layer is difference between these two kind of tubes. (Absorption of heat membrane layer is the key part of vacuum tubes.) Absorption of heat membrane layer of three high efficiency solar vacuum tube is interference membrane, common tube is gradient membrane. The difference is mainly for interference membrane and the gradient membrane distinction. 1. Fundamental distinction: membrane layer structure is different, the principle of the absorption of sun's rays result in differently. gradient membrane, for multilayer, its absorbing layer is generally 9 layers. It to the sun's rays are layered absorption, and its absorb the light performance gradually become tall. Because the gradient structure, launch with increasing temperature rise than work, that temperature in 300 to 500 C than when launch greatly increased. The aluminum ions and absorbing layer in high temperature condition, lively nature greatly enhance the, and develop a drift. This happened in the internal structure of membrane layer caused confusion, coating began to aging. In the long run, the high temperature condition, membrane layer can fall off, thereby affecting the vacuum tube heat efficiency and life integrating. Interference membrane, its absorbing layer altogether 2 layer, among two layer membranes, because the metal content between the different and interfere ratio effect, make absorption ratio increase, launch ratio decrease. Plus effect of reduce emission from minus reverse layer, thus achieve more higher absorptance and reducing the role of launch ,greatly improved collection thermal efficiency. 2.Features: Absorptance of three high efficiency solar vacuum tube increased by 12%, and launch reduced by 30 to 40 percent, the super absorbing, heat loss less, warming faster. Efficient tube, the super absorbing, thermal efficiency is high, warming faster, in the same light conditions, can create more and higher temperature water than common tubes ; high cold tube, copper ions for the launch of aluminum ion mantua, so low 0.2 thermal loss rarely, in high cold environment can still work normally. hot water turn out as usual under- 30 C. high temperature special efficiency tube, because the membrane layer stainless steel ion high temperature resistant, fight air drying. Membrane layer under the condition of the 400 C, not attenuation, not aging, discoloration. In the same light conditions, ordinary tube heat absorption is lower than three high efficiency solar vacuum tube, can't even meet requirements that wash bath; In lower temperature, heat loss is bigger, collection hot effect is reduced, affect the normal use; Especially in the empty sun over 270 C, membrane layer began to aging, fall off, absorption rate drastically reduce, life shortens greatly. 3.Technology: high temperature special effects tube, high cold tube, efficient tube used respectively to three target, double target, single target magnetron sputtering craft; Ordinary tube typically use the single target magnetron sputtering technology. 4, appearance: A, Mouth of tube, here membrane layer above 800 C high temperature condition sealing off part is inevitable. As high temperature special effects tube has high temperature resistant, only 1 cm long without membrane layer in mouth of tube, while others without membrane layer for without high temperature resistant, tube membrane layer falls off the length is about 2.5 cm B, Inner tube color: with macroscopic observation, high-temperature tubes and high cold tube for internal color is kermesinus (for membrane layers bottom is copper); the bottom And efficient tube and ordinary tube are white (for membrane layer bottom is aluminum). Anyhow, interference membrane is the new breakthrough basis of gradient on membrane technology ,it is the great innovation in coating technology progress and become current global, interference coating of the most advanced coating technology. But also to the vacuum coating technology bring epoch-making change. Especially with the high temperature effects made interference membrane, can also be used for cooling tube, dry, seawater desalination, opened up the update for vacuum tubes wider application fields. Solar collector tube introduction Feature: 1 Quality warranty :15 years Quickly thermal collecting efficiency. It works fine under cold weather and area. Three kind of solar collector: Common :evacuated collector tubes. High-efficiency: Three-target evacuated collector tubes: blue and black-golden High-efficiency: Three-target evacuated collector tubes: purple-golden (purple and golden) Solar evacuated collector tubes technical data: Dimension: 47: 58 Material of tubes: 3.3 high borosilicate: 3.3 high borosilicate Glass expansion ratio: 3.3¡¾0.1X10-6 k-1: 3.3¡¾0.1X10-6 k-1 Outer diameter of tubes: 47¡¾0.7: 58¡¾0.7 Inner diameter of tubes: 37¡¾0.7: 48¡¾0.7 Thickness of glass: 1.6¡¾0.15: 1.6¡¾0.15 Transmittance: 0.89: 0.89 Selective coating: SS-CU-AL-N/AL: SS-CU-AL-N/AL Adsorptivity: 0.86(AM1.5): 0.86(AM1.5) Emissivity: 0.080(80¡¾5): 0.080(80¡¾5) Vacuum degree: 5.0 X 10-3Pa: 5.0 X 10-3Pa Collecting performance under sunshine: 190m2/kw: 190m2/kw Hailstone resistance: 25mm: 25mm Start up fast and collect solar energy fully Unique super pure copper surface,allowing reflection and minimal heat loss. High level vacuum ensure operation under cold weather. Long time warranty to 15 years. 10pcs/Carton. Applications: superior heat resisting products and crafts. 15-20KG/Carton.

Astm Sea worthy packaging